• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1529-1538
• /
• 2013

Disasters like mountain landslides and collapse in cutting areas claim many a life and cause economic losses, involving much effort and expenses for their recovery. This study has surveyed and analyzed incident of disasters that had occurred on the sloping sides in Korea for the past 13 years in an effort to relieve damage caused by disasters on the sloping sides. The analysis confirms that while the major cause of disasters on the sloping side was storms in the past, frequency of disasters on sloping sides caused by local downpour is steadily on the rise. In addition, while disasters were concentrated in Gangwon Province, a mountainous region of the country, frequency of disasters occurring on the sloping sides is steadily increasing recently on the sloping sides in downtown areas in Seoul, Gyeonggi-do and so forth, attributing a large percentage of disasters to sloping sides. Data surveyed and analyzed in this study are thought to be applicable as basic data for the establishment of effective measures for the prevention of disasters occurring on the sloping sides in the days to come.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2017

Approximately 64 percent of Korean territory is covered with mountains, and there is occurred a continuous mountain disaster such as landslide, debris flow and slope failure around mountain slopes due to heavy rainfall and typhoon in the summer season. Even in such a reality, the development of mountain areas is being carried out through the development and expansion of social infrastructures centered on mountain areas, but systematic management is insufficient. Constructions of a forest road facility for mountain slopes can be a cause of mountain disasters intensively in the summer season due to artificially changing the mountain area. In this unstable mountain environment, efforts to build a disaster-resistant environment are urgently needed. This research is to analyze the stability of mountain slopes according to soil depth (1~5 m) and mountain slope ($20{\sim}60^{\circ}$) considering the characteristics of rainfall infiltration under extreme rainfall conditions. As a result, the stability of the mountain slope was found to be different according to the depth of soils and the saturation area of the soil layer. As well as the stability of the mountain area was found to be lower than that of the natural mountain area. Specially, rainfall infiltration occurs at the upper slope of the forest road. For this reason, the runoff phenomenon of rainfall infiltration water occurs clearly when the depth of soil layer is low.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.585-596
• /
• 2022

This study determined major factors influencing landslide occurrence along a forest road near Sangsan village, Sancheok-myeon, Chungju-si, Chungcheongbuk-do, South Korea. Within a 2 km radius of the study area, landslides occur intensively during periods of heavy rainfall (August 2020). This makes study of the area advantageous, as it allows examination of the influence of only geological and tomographic factors while excluding the effects of rainfall and vegetation. Data for 82 locations (37 experiencing landslides and 45 not) were obtained from geological surveys, laboratory tests, and geo-spatial analysis. After some data preprocessing (e.g., error filtering, minimum-maximum normalization, and multicollinearity), structural equation model (SEM) and logistic regression (LR) analyses were conducted. These showed the regolith thickness, porosity, and saturated unit weight to be the factors most influential of landslide risk in the study area. The sums of the influence magnitudes of these factors are 71% in SEM and 83% in LR.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.201-211
• /
• 2023

This study investigated the damage range of the debris flow to predict the amount of collapsed soil in a landslide event. The height of the collapsed slope and the distance traveled by the collapsed soil were used to predict the total trajectory distance using a random walk model. Debris flow trajectory probabilities were calculated through 10,000 Monte Carlo simulations and were used to calculate the damage range as measured from the landslide scar to its toe. Compiled information on debris flows that occurred in the Cheonwangbong area of Mt. Jirisan was used to test the accuracy of the proposed random walk model in estimating the damage range of debris flow. Results of the comparison reveal that the proposed model shows reasonable accuracy in estimating the damage range of debris flow and that using 10 m × 10 m cells allows the damage range to be reproduced with satisfactory precision.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.137-151
• /
• 2018

Recently, National interest has been rising due to earthquakes in Gyeongju and Pohang, disasters caused by landslides, landslides, and sinkholes around construction sites, and damage caused by disasters. SAR is able to detect ground displacement in mm for wide area, collect data through satellite, predict timeliness of crustal change by time series analysis, and reduce disaster and disaster damage. The purpose of this study is to investigate the latest SAR interference analysis technique (SqueeSAR analysis technique) of Sentinel-1A satellite (SAR sensor) of European ESA for about 3 years by selecting the 1st landfill site in the metropolitan area in Incheon, The settlement amount was calculated in a time series. Especially, in order to examine the accuracy of the subsidence and subsidence tendency by the SqueeSAR analysis method, the ground level survey was compared and analyzed for the first time in Korea. Also, the tendency of the subsidence trend was predicted by analyzing the time series and correlation trend of the subsidence for three years. Through this study, it is expected that disaster prevention and disaster prevention such as sinkhole and landslide can be utilized from time series monitoring of crustal variation of the land.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.300-302
• /
• 2013

자연재해의 예방에 대한 인식이 화두가 되면서 최근 재해 경보 시스템을 다루는 새로운 연구들이 활발히 진행되고 있다. 제안하는 알고리듬은 영상을 통해 얻은 정보를 이용하여 산사태를 초기에 검출하는 방법이다. 기존의 검출 방법은 사람이 직접 모니터링을 해야 하기 때문에 많은 인력과 시간을 필요로 하고 접근성이나 비용문제 등의 각종 제약이 따른다. 따라서 효율적인 산사태 감지를 위해 산사태 발생 가능 지역에 비디오 기반의 감지 시스템을 통해서 자동으로 검출하는 시스템이 필요하다. 감지 시스템에서는 신뢰성 있는 재난영역의 검출이 매우 중요하다고 볼 수 있다. 본 연구는 산사태를 검출하기 위하여 먼저 블록단위의 영역 움직임 검출을 하여, 움직임 맵을 만들고 일정한 시간 간격으로 반복적으로 변하는 영역의 움직임 맵을 기록한다. 또한 움직임 방향뿐만 아니라 발생 순서를 기록하여 더욱더 정확한 움직임을 판단할 수 있다. 제안된 알고리듬은 비디오영상 실험을 통해 탐지영역의 산사태 검출이 잘 이루어짐을 확인하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1366-1375
• /
• 2010

The damage by Debrisflow is occurring repeatedly recently by influences of abnormal climate changes. To reduce damage of Debris flow, primarily establishes the suitable measures and apply, in order to do that it is important for investigate the actual condition of Debrisflow. However, it is difficult to understand the current situation of Debrisflow phenomenon because the limit of technical development. For the reduce damage by future Debrisflow, have to collect data, analysis and preservation base on real status of Debrisflow disasters. This paper will refer to The Proposal of Debrisflow Investigation development have been applied overseas to the The Proposal of Debrisflow Investigation which already proposed it at these papers with bases. And this paper will suggest currently face objective The Proposal of Debrisflow Investigation to be able to do utilization to a Debrisflow occurrence situation and state and further study analysis(2).

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.5
• /
• pp.5-16
• /
• 2016

A rainfall induced slope failure is a common natural hazard in mountainous areas worldwide. Sudden and rapid failures which have a high possibility of occurrence in a steep slope are always the most dangerous due to their suddenness and high velocities. Based on a series of experiments this study aimed to determine a critical angle which could be considered as an approximate threshold for a sudden failure. The experiments were performed using 0.42 mm mean grain size sand in a 200 cm long, 60 cm wide and 50 cm deep rectangular flume. A numerical model was created by integrating a 2D seepage flow model and a 2D slope stability analysis model to predict the failure surface and the time of occurrence. The results showed that, the failure mode for the entire material will be sudden for slopes greater than $67^{\circ}$; in contrast the failure mode becomes retrogressive. There is no clear link between the degree of saturation and the mode of failure. The simulation results in considering matric suction showed good matching with the results obtained from experiment. A subsequent discarding of the matric suction effect in calculating safety factors will result in a deeper predicted failure surface and an incorrect predicted time of occurrence.

• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.639-652
• /
• 2023

Stepped earth slopes incorporated with anti-slide piles are widely utilized in landslide disaster preventions. Explicit consideration of the three-dimensional (3D) effect in the slope design warrants producing more realistic solutions. A 3D limit analysis of the stability of pile stabilized stepped slopes is performed in light of the kinematic limit analysis theorem. The influences of seismic excitation and surcharge load are both considered from a kinematic perspective. The upper bound solution to the factor of safety is optimized and compared with published solutions, demonstrating the capability and applicability of the proposed method. Comparative studies are performed with respect to the roles of 3D effect, pile location, pile spacing, seismic and surcharge loads in the safety assessments of stepped slopes. The results demonstrate that the stability of pile reinforced stepped slopes differ with that of single stage slopes dramatically. The optimum pile location lies in the upper portion of the slope around L_x/L = 0.9, but may also lies in the shoulder of the bench. The pile reinforcement reaches 10% universally for a looser pile spacing D_c/d_p = 5.0, and approaches 70% when the pile spacing reaches D_c/d_p = 2.0.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.77-85
• /
• 2014

Recently, the National Emergency Management Agency of Korea has been operating the National Disaster Management System. Nevertheless, there are numerous difficulties in systematic controlling the steep slope DB promptly, because the system's functions in input and control for steep slope information are merely simple. Futhermore, the hazard degrees of steep slope lands nowadays have risen suddenly in accordance with the increase rate of large scale landslides such as the landslide cases of Umyeonmountain, Chuncheon province and others or sever rain storm cases. these lead to rapid increases in frequencies of nature disasters nationally. therefore, it is needed to develop the GIS-based integrated management system for steep slope information in order to manage disasters in advance or high-degree control. This study shows the national GIS-based integrated management system to prevent the disasters that caused by steep slope lands. The integrated management system developed in this study consists of surface information input modules, realtime DB liaison modules of integrated underground information, V-world background map-based GIS, integrated management system for steep slope information user modules, realtime liaison interface modules designed for utilizing steep slope information. Also, tests about stability of data storage, system stability and consistency of processing speed were performed.