• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.323-330
• /
• 2007

A simple and rapid HPLC method with fluorescence detection(FLD) for quantitation of penciclovir in human plasma using a monolithic column was developed and validated. Penciclovir and ganciclovir(internal standard, I.S.) were separated on a Chromolith column RP-18e ($4.6{\times}100mm$) with a mobile phase consisting of a mixture of (A) methanol/50 mM sodium phosphate buffer containing 200 mg/L sodium dodecyl sulfate (3/97, pH 2.5) and (B) methanol/50 mM sodium phosphate buffer containing 200 mg/L sodium dodecyl sulfate (50/50, pH 2.5) at a flow gradient of $1.6{\sim}4.0mL/min$. The retention times of penciclovir and internal standard were less than 4.0 min. Calibration curve was linear ($R^2=0.9994$) over a concentration range of $0.1{\sim}5{\mu}g/mL$. Intra-day precision, accuracy and inter-day precision were 1.36~8.55 %, 92.8~100.0 % and 0.93~5.62 %, respectively with a limit of quantitation at $0.1{\mu}g/mL$. The present HPLC-FLD method is sensitive, precise and accurate. The method described herein has been successfully used for the bioequivalence study of a famciclovir formulation product after oral administration to healthy Korean volunteers.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.307-312
• /
• 2009

A spectrofluorimetric methods has been developed for the determination of carbaryl in an aqueous solution. The effects of excitation wavelength, concentration of surfactant, concentration of ethanol as cosurfactant and emission wavelength on the fluorescence intensity were investigated to find the optimum experimental conditions to determine carbaryl. The emission intensity of the carbayl was increased with addition of sodium dodecyl sulfate (SDS) as a surfactant. The emission intensity of the carbaryl was further increased with addition of ethanol as a co-surfactant. The optimum conditions were 281 nm for excitation wavelength, $1.0{\times}10^{-2}mol/L$ SDS, 20% (v/v) ethanol and 349 nm for emission wavelength. Under the optimum conditions, the emission intensity increased with the carbaryl concentration in the range of $5{\times}10^{-7}$ to $1.0{\times}10^{-4}mol/L$ with a detection limit ($3{\sigma}$) of $1.1{\times}10^{-8}mol/L$. The resulting correlation coefficient of the working curve was 0.9996.

• Journal of fish pathology
• /
• v.13 no.1
• /
• pp.61-66
• /
• 2000

A method was developed for concentrating fish pathogenic virus from sea water using membrane ultrafiltration system and centricon. The method consists of passing large volumes (Ca. 20 liter) of sea water through ultrafiltration (PAN) filter followed by cross-flow filtration method and centrifugation use the centricon (Plus-20). This procedure permitted the processing of 20 liter of sea water which resulted in a 20,000-fold reduction in the volume of water and greater than 90% recovery of the seeded MABV.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.73-80
• /
• 2021

In this paper, we propose a packet processing method capable of handling large-capacity traffic over 20Gbps using multi-core and huge page memory approaches. As ICT technology advances, the global average monthly traffic is expected to reach 396 exabytes by 2022. With the increase in network traffic, cyber threats are also increasing, increasing the importance of traffic analysis. Traffic analyzed as an existing high-cost foreign product simply stores statistical data and visually shows it. Network administrators introduce and analyze many traffic analysis systems to analyze traffic in various sections, but they cannot check the aggregated traffic of the entire network. In addition, since most of the existing equipment is of the 10Gbps class, it cannot handle the increasing traffic every year at a fast speed. In this paper, as a method of processing large-capacity traffic over 20Gbps, the process of processing raw packets without copying from single-core and basic SMA memory approaches to high-performance packet reception, packet detection, and statistics using multi-core and NUMA memory approaches suggest When using the proposed method, it was confirmed that more than 50% of the traffic was processed compared to the existing equipment.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.511-519
• /
• 2022

In order to develop an air-stripping based remediation process to remove the TOC (Total Organic Carbon) in groundwater around the underground LPG storage cavern, the laboratory scale experiments at various conditions (change of air injection volume and temperature, the application of ultrasonic treatment, etc.) for two types of groundwater (initial TOC concentration of 608 mg/L and 153 mg/L, respectively). From results of experiment, as the air injection rate for stripping into groundwater increased from 2 L/min to 11 L/min and as the air-stripping time increased from 1 hour to 24 hour, the TOC removal efficiency of air-stripping increased. However, the TOC concentration of treated groundwater was higher than the discharge tolerance limit (100 mg/L) even after 24 hour stripping at the maximum air injection rate of 11 L/min. The main compounds of the TOC in groundwater were identified as methanol and propane and the long stripping time (more than 24 hour) was needed to separate the methanol from groundwater because of the affinity between water and methanol. At 20℃ and 4 L/min of air injection, the TOC removal efficiency increased to 59.1% after 24 hour air-stripping. When the temperature of groundwater increased to 30℃ and 40℃, the TOC removal efficiency increased up to 80.0% and 82.8%, suggesting that more than 24 hour air-stripping at 40℃ is needed to lower the TOC concentration to below 100 mg/L and the additional TOC removal process as well as the air-stripping is necessary. When the temperature increased to 60℃ and the ultrasonic treatment was conjugated with the air-stripping, the TOC removal efficiency increased to 87.8% within 5 hour stripping and the final TOC concentration (72.4 mg/L) was satisfied with the TOC discharge tolerance limit. The TOC removal efficiency for groundwater having low TOC concentration (153 mg/L) also showed similar removal efficiency of 89.7% (the final TOC concentration: 18.9 mg/L). Results in this study supported that the air-stripping conjugated with the ultrasonic treatment could remove successfully the TOC in groundwater around the underground LPG strorage cavern.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.102-108
• /
• 2008

Reversed-phase high performance liquid chromatography (RP-HPLC) was used for the simultaneous determination of liquiritin (LQ), glycyrrhizic acid (GA) and glabridin from licorice. An optimized run condition was selected with a binary gradient elution of methanol-water which ramped 35/65 to 80/20 (vol. %) in 0.0-8.0 min and a flow rate of 1.0 mL/min. A good linearity was obtained between 0.2 mg/mL and 1.0 mg/mL for LQ and GA, and 0.01 mg/mL-0.2 mg/mL for glabridin with the relative standard deviations less than 0.90% (n=5). The developed method was successfully applied to determination of the three components from licorice samples. The mean recoveries of three components are 80.79% for liquiritin, 89.71% for glycyrrhizic acid and 72.50% for glabridin.

• Journal of Life Science
• /
• v.9 no.6
• /
• pp.692-697
• /
• 1999

For further removal of non-biodegradable CODs and color in biologically treated distillery waster water, we selected a chemical treatment with Fe(III) and cationic polymers and then another chemical treatment with Fenton reagent. We developed Pregenerated Bubble Flotation(PBF) to effectively remove the chemical sludge from each chemical reaction process. The flotation unit was constructed with hydraulic loading rate, 7 ㎥/$m^2$.hr. The CODMn and suspended solids (SS) in biologically treated distillery waste water were reduced by the first PBF from 310-1096 mg/L to 141-303 mg/L and from 160-990 mg/L to 48-385 mg/L, respectively. Again, after the Fenton reaction process, floated SS was skimmed off at the top of the flotation unit and the final effluent was directly discharged without any tap water dilution. The quality of final effluent can be below 40 mg/L-CODMn but IISan Distilery has been maintained effluent quality of 73 mg/L-CODMn and 10-80 mg/L-SS. The chemical cost was saved by more than 30% as compared with that of prior process.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.34-41
• /
• 2021

The purpose of this research is to improve analysis methods of determining the contents of fatty acids in infant formulas and follow-up formulas. A gas chromatography (GC) method was performed on a GC system coupled to flame ionization detector, with a fused silica capillary column (SP2560, 100 m×0.25 mm, 0.20 ㎛). The method was validated using standard reference material (SRM, NIST 1849a). Performance parameters for method validation such as specificity, linearity, limits of detection (LOD) and quantification (LOQ), accuracy and precision were examined. The linearity of standard solution with correlation coefficient was higher than 0.999 in the range of 0.1-5 mg/mL. The LOD and LOQ were 0.01-0.06 mg/mL and 0.03-0.2 mg/mL, respectively. The recovery using standard reference material was confirmed and the precision was found to be between 0.8% and 2.9% relative standard deviation (RSD). Optimized methods were applied in sample analysis to verify the reliability. All the tested products had acceptable contents of fatty acids compared with component specification for nutrition labeling. The result of this research will provide efficient experimental information and strengthen the management of nutrients in infant formula and follow-up formula.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.109-119
• /
• 1989

We measured fasting serum angiotensin -converting enzyme (SACE) in 100 healthy controls and 75 coal worker's pneumoconiosis (CWP) patients by a commercial kits($ACEcolor^{(R)}$, Fujirio Inc., Japan) and evaluated this manual method. The linear range extends to an activity of 80U/L. Precision on a commercial control serum (ACE control-$N^{(R)}$, Sigma Co.)with a mean value, of 9.47U/L yielded a within-run and between-run CVs are 5.6% (N=15) and 6.9% (N=14) respectively. SAVE in 75 CWP was $20.3{\pm}5.7U/L$ ($mean{\pm}s.d.$) ; higher than in healthy controls ($13.4{\pm}3.9U/L$, P<0.01). No correlation was found between SACE, sex, and age. The results suggest that the measurement of SACE and follow-up SACE in coal workers may be a useful diagnostic fools for CWP.