• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.16-26
• /
• 2012

Pseudolites are ground-based transmitters that can be configured to emit GPS-like signals for enhancing the GPS by providing increased accuracy, integrity, and availability. However, a pseudolite (PL) can interfere with GPS satellite signals while it is transmitting or cause saturation to automatic gain control circuit. To solve these problems pulsing scheme is used, which transmits PL signal during a short period of time. In this paper the effect of the number of PL and pulsing scheme on the software GPS L1 and L2C signal acquisition performance is studied for the three pulsing schemes such as static pulsing, sweep pulsing, and pseudo random pulsing. For GPS L1 signal, static pulsing shows the best signal acquisition and tracking performance with one PL, and random pulsing shows the best performance with more than or equal to two PLs. For GPS L2C signal, all three pulsing schemes show the similar signal acquisition and tracking performance, but static pulsing shows a little better performance. For GPS L1 and L2C signals, software GPS receivers can do positioning with up to three PLs.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.10-15
• /
• 2011

본 논문은 위성항법신호감시국용 GPS/갈릴레오 복합수신기에 대한 구현 및 성능 시험결과를 기술한 논문으로 복합수신기는 단일 플랫폼에서 갈릴레오 E1, E5a 신호와 GPS L1, L2C, L5 신호를 수신처리 할 수 있으며, GPS신호와 갈릴레오 E1 신호를 복합적으로 처리함으로써, 위치정확도가 향상됨을 보였다. 각 신호에 대한 신호획득을 신속하게 하기 위해, 모든 신호에 대해 정합필터와 FFT 방식이 결합된 방식을 적용하였고, 신호추적과정에서는 다수의 추적루프를 적용하였으며 본 논문에서는 주요 신호에 대한 신호획득 및 추적과정의 시험결과를 보였다. 또한 기존에 발표된 논문과의 차별화 항목으로, 항법신호의 수신레벨이 낮아 CW 형태와 같은 간섭신호에도 영향을 받는바, 이에 대한 개발된 항재밍 모듈에 대한 시험결과도 제시하였으며, 성능측면에서의 비교를 위해 상용수신기와 개발된 수신기와의 성능 비교 결과도 함께 제시하였다.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.649-653
• /
• 2020

GPS is a representative satellite navigation system that provides users with accurate location and time information. GPS L1 C / A is opened for civilian and thus utilized in various fields. When the satellite signal reaches the receiver, signal acquisition unit of the digital signal processing hardware searches and acquires the signal among visible satellites. The signal acquisition unit has different implementation methods depending on the signal searching method, such as serial search acquisition, parallel frequency search, parallel code phase search. In this paper, we compare and analyze the three representative acquisition hardwares using live GPS L1 C/A signals. According to the comparison, the parallel code phase search acquisition outperforms the other methods due to reduction of the number of the searchings and a high resolution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.78-81
• /
• 1999

The position and time errors of a conventional L1-band GPS receiver (1575.42MHz) are known to be about 100 m and 70 ns, respectively. These errors are mainly due to the propagation delay of GPS satellite signals through ionosphere. Various L1/L2 dual-band GPS receivers are normally used to compensate for those position and time errors by detecting an accurate propagation delay. These receivers detect the propagation delay difference between the L1 and L2 signals based on the fact that the propagation delay through ionosphere is dependent on frequency and, from which, calculate an accurate propagation delay of the GPS signals through ionosphere. In this paper, we analyzed the architecture of a L1/L2 dual-band CPS receiver by high-level simulations with Synopsys's COSSAP Tool.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.29-35
• /
• 2013

In this paper, we investigate the type and detection methode of spoofing attack, and then analyze the performance of spoofing detection algorithm in GPS L1 signal through the simulation. Generally spoofer is different from the jammer, because the receiver can be operated and not. In case of spoofing the GPS receiver is hard to recognize the spoofing attack and can be operated normally without stopping because the spoofing signal is the mimic GPS signal. To evaluate the performance of spoofing detection algorithm, both the software based spoofing and GPS signal generator and the software based GPS receiver are implemented. In paper, we can check that spoofing signal can affect to the DLL and PLL tracking loop because code delay and doppler frequency of spoofing. The spoofing detection algorithm has been implemented using the pseudorange, signal strength and navigation solution of GPS receiver and proposed algorithm can effectively detect the spoofing signal.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.116-125
• /
• 2020

Incalculable damage will be incurred if the national infrastructure that provides services using GNSS signals is affected by jamming signals. To prevent this, a nationwide GNSS jamming monitoring network is necessary to detect the occurrence of a jamming signal, determine the type, and properly localize the jammer position. In this paper, 2-D images for live GNSS signals were generated to verify the environment of the jamming signals through the presence and type of GNSS jamming signals at K-City, which are the test beds for self-driving vehicles, and Incheon International Airport. The analysis was also conducted to detect the occurrence of the jamming signals, determine the type, and measure the jamming signal strength. As a result, a CWI type of jamming signal was detected in L2 band at K-City and in L5 band at Incheon International Airport.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.147-152
• /
• 2018

Underwater transient signals are complex, variable and nonlinear, resulting in a difficulty in accurate modeling with reference patterns. We analyze one type of underwater transient signals, in the form of whale sounds, using the MFCC(Mel-Frequency Cepstral Constant) and synthesize them from the MFCC and the weighted $L_2$-norm minimization techniques. The whales in this experiments are Humpback whales, Right whales, Blue whales, Gray whales, Minke whales. The 20th MFCC coefficients are extracted from the original signals using the MATLAB programming and reconstructed using the weighted $L_2$-norm minimization with the inverse MFCC. Finally, we could find the optimum weighted factor, 3~4 for reconstruction of whale sounds.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.15-20
• /
• 2016

In this paper, we developed the hardware GPS signal generator for generating a GPS L1 meaconing signal with Live GPS signal signals and analyzed the performance of meaconing signal generator thorough the experiment. Deception of the signal, such as a re-broadcast, it is an object of the user to provide false information so as not to receive location information and accurate time. The signal just rebroadcast has the features that can be easily deceive the receiver via a delay of no received signal to the signal processing through an antenna. In this paper, the hardware for generating a signal only these rebroadcast designed and manufactured, by re-sending the received Live GPS signals, to confirm the effect of the receiver. The maximum delay time is possible up to about 2.6msec, also, has been successfully tested to be moved to the position of re-broadcasting based on maturity antenna the position of the receiver through a spaced antenna.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.512-519
• /
• 2012

To design a new Navigation Satellite System signal, we should analyze the influence of inter-system interference to existing Global Navigation Satellite Systems(GNSS). Various GNSS systems such as GSP, GALILEO, Compass use same frequence band and incur inter-system interference due to the overlapping spectrums. In this paper, we consider L2 Band for new Navigation Satellite System and propose the BOCcos(15,2.5) signal what has least Spectral Separation Coefficient with GPS L2 system. Assuming 4 stationary satellite over Korea, we simulate the effect of interference. As a result, proposed system shows very small mutual interference effect and negligible effective signal to noise ratio(SNR) loss, compared to the interferences between GNSS systems in L1 Band.