• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.41-50
• /
• 2017

The design of proper agitation system is requisite in biological waste treatment and energy generation plant, which is affected by viscosity, impeller types, and power consumption. In the present work, hydrogen fermentation of food waste was conducted at various operational pHs (4.5~6.5) and substrate concentrations (10~50 g Carbo. COD/L), and the viscosity of fermented broth was analyzed. The $H_2$ yield significantly varied from 0.51 to $1.77mol\;H_2/mol\;hexose_{added}$ depending on the pH value, where the highest performance was achieved at pH 5.5. The viscosity gradually dropped with shear rate increase, indicating a shear thinning property. With the disintegration of carbohydrate, the viscosity dropped after fermentation, but it did not change depending on the operational pH. At the same pH level, the $H_2$ yield was not affected much, ranging $1.40{\sim}1.86mol\;H_2/mol\;hexose_{added}$ at 10~50 g Carbo. COD/L. The zero viscosity and infinite viscosity of fermented broth increased with substrate concentrations, from 10.4 to $346.2mPa{\cdot}s$, and from 1.7 to $5.3mPa{\cdot}s$, respectively. There was little difference in the viscosity value of fermented broth at 10 and 20 g Carbo. COD/L. As a result of designing the agitation intensity based on the experimental results, it is expected that the agitation intensity can be reduced during hydrogen fermentation. The initial and final agitation intensity of 30 g Carbo. COD/L in hydrogen fermentation were 26.0 and 10.0 rpm, respectively. As fermentation went on, the viscosity gradually decreased, indicating that the power consumption for agitation of food waste can be reduced.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.72-79
• /
• 2011

Here we report a simple screening system using hematoxylin staining (HS) of the root apex. It allowed rapid classification into different aluminum (Al) tolerance from 65 cultivars within one week. Using this system, we selected the most Al-tolerant (Jayae-2) and-sensitive (Pum-2) barley (Hordeum vulgare L.) The results show that the different responses in Al-induced growth inhibition, Al accumulation and expression of plasma membrane (PM) $H^+$-ATPase in root apices of selected two cultivars. It showed strongly Al-induced growth inhibition in a dosedependant manner only in Pum-2 but not in Jayae-2. Aluminum accumulation in root apices (10 mm) was significantly higher in Pum-2 only. The $H^+$-ATPase expression of PM vesicles by western blotting was decreased in Pum-2 but not in Jayae-2 treated with $20{\mu}M$ Al for 24 h. These finding indicate to screen from our system is rapid and reliable and to sustain the expression of PM $H^+$-ATPase at translational level is an important role in root growth as affected by Al.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.61-68
• /
• 2009

The main objective of this study was to examine the removal of heavy metals from water by inflated vermiculites. The component of vermiculites was analyzed by XRF, and the concentration of metal ion was measured by ICP-AES. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for heavy metals in aqueous solutions. As a result, solution pH values of tests with the inflated vermiculites generally increased and then stabilized. Equilibrium pHs were generally established within 5 hrs. In addition, removal rates of inflated vermiculites were tested at the initial concentration of 3 mg/L. As a result, at equilibrium concentration, except for chromium (36.23%), Most of the heavy metals were effectively removed (96.08~98.54%). Finally, sorption data were correlated with both Langmuir and Freundlich isotherms. The Qmax obtained from Langmuir isotherm were determined to Pb $725.4mg\;kg^{-1}$, Cd $568.8mg\;kg^{-1}$, Zn $540.2mg\;kg^{-1}$, Cu $457.2mg\;kg^{-1}$ Cr $0.9mg\;kg^{-1}$ respectively. The results of the study indicate that inflated vermiculites can be properly used as an adsorbent for various heavy metals because of its outstanding removal rate.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.607-615
• /
• 2016

This research was conducted to investigate the influence of different kinds of acids added to irrigation water containing high levels of bicarbonate on the growth and daughter plant production during the propagation of 'Seolhyang' strawberry. Fertigation solution was prepared with equal concentrations of essential nutrients as found in Hoagland solution, plus $240mg{\cdot}L^{-1}\;HCO_3{^-}$. The concentrations of $HCO_3{^-}$ in the treatment solution were decreased to $60mg{\cdot}L^{-1}$ by the addition of $HNO_3$, $H_3PO_4$, $H_2SO_4$, $HNO_3+H_3PO_4$, or salicylic acid. The mother plants transplanted to raised beds were treated with a specific treatment solution for 126 days and growth and daughter plant productions were monitored. The fresh weight of mother plants in the -control treatment ($240mg{\cdot}L^{-1}\;HCO_3{^-}$) was significantly lower than those in acid containing treatments. The number of daughter plants produced per mother plant was 13 in the -control treatment, but 19.4, 20.1, 18.6, 22.4, and 18.9 in the treatments of $HNO_3$, $H_3PO_4$, $H_2SO_4$, $HNO_3+H_3PO_4$ and salicylic acid, respectively. The substrate pHs after 126 days of treatment were 8.2 and 7.3 in the -control and salicylic acid treatments, respectively, but 5.5, 5.4, 5.3, and 5.5 in the treatments of $HNO_3$, $H_3PO_4$, $H_2SO_4$, and $HNO_3+H_3PO_4$ treatments, respectively. The tissue Ca and Mg contents of mother plants were significantly higher in +control ($90mg{\cdot}L^{-1}\;HCO_3{^-}$) and various acid blending treatments compared to the -control treatment. By contrast, Ca and Mg contents were not significantly different among treatments with acids. The Fe, Mn, Zn, and Cu contents in plant tissue of -control were also significantly lower than those in all other treatments.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.746-753
• /
• 2008

The hprK gene encoding bifunctional HPrK/P (kinase/phosphorylase) was cloned from L. mesenteroides SY1, a strain isolated from kimchi. hprK was transcribed as a monocistronic gene. His-tagged HPrH16A and HPrK/P were produced in E. coli BL21 (DE3) using pET26b(+) and purified. HPrK/P phosphorylation assay with purified proteins showed that the kinase activity of HPrK/P increased at slightly acidic pHs. Divalent cations such as $Mg^{2+}$ and $Mn^{2+}$ and glycolytic intermediates such as fructose-1, 6-bisphosphate (FBP) and phosphoenolpyruvate (PEP) increased the kinase activity of HPrK/P, but inorganic phosphate strongly inhibited it. Kinetic studies for the kinase activity of HPrK/P showed that the apparent $K_m$ values were 0.18 and $14.57{\mu}M$ for ATP and HPr, respectively. The $K_m$ value for the phosphorylase activity of HPrK/P was $14.16{\mu}M$ for P-Ser-HPr (HPr phosphorylated at the serine residue).

• KSBB Journal
• /
• v.24 no.6
• /
• pp.579-583
• /
• 2009

The effects of cell lytic enzyme treatment on total phenolic content, antioxidant and antityrosinase activities of lotus leaf were investigated. The dried lotus leaves were hydroyzed by cell lytic enzymes such as Promozyme, Ceremix, Pectinex, Ultraflo, Celluclast, Pentopan, Tunicase, Viscozyme at their optimum pHs (pH 5-8) at $50^{\circ}C$ for 4 hrs. Depending on the enzymes used, total phenolic compounds content was measured as $1,079-1,476{\mu}g$/mL, and antioxidant activities and whitening activities were increased by 5~10% and 20%, respectively Among the tested hydrolytic enzymes, Promozyme (pullulanase) was selected as the most suitable enzyme for the extraction of total polyphenol from lotus leaf. The optimal dosage of Promozyme were found to be 1-2% (w/w). By Promozyme treatment, total phenolic compounds content of the lotus extract significantly increased compared to the extraction without enzyme treatment.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.87-97
• /
• 2018

The cesium (Cs) removal from the contaminated water system has been considered to be difficult because the cesium likes to exist as soluble phases such as ion and complexes than the solid in water system. Many researches have focused on developing the breakthrough adsorbent to increase the cesium removal efficiency in water. In this study, the laboratory scale experiments were performed to investigate the feasibility of the adsorption process using the bamboo charcoal for the Cs contaminated water system. The Cs removal efficiency of the bamboo charcoal were measured and the optimal adsorption conditions were determined by the adsorption batch experiments. Total 5 types of commercialized bamboo charcoals in Korea were used to identify their surface properties from SEM-EDS and XRD analyses and 3 types of bamboo charcoals having large specific surface areas were used for the adsorption batch experiment. The batch experiments to calculate the Cs removal efficiency were performed at conditions of various Cs concentration (0.01 - 10 mg/L), pH (3 - 11), temperature ($5-30^{\circ}C$), and adsorption time (10 - 120 min.). Experimental results were fitted to the Langmuir adsorption isotherm curve and their adsorption constants were determined to understand the adsorption properties of bamboo charcoal for Cs contaminated water system. From results of SEM-EDS analyses, the surfaces of bamboo charcoal particles were composed of typical fiber structures having various pores and dense lamella structures in supporting major adsorption spaces for Cs. From results of adsorption batch experiments, the Cs-133 removal efficiency of C type bamboo charcoal was the highest among those of 3 bamboo charcoal types and it was higher than 75 % (maximum of 82 %) even when the initial Cs concentration in water was lower than 1.0 mg/L, suggesting that the adsorption process using the bamboo charcoal has a great potential to remove Cs from the genuine Cs contaminated water, of which Cs concentration is low (< 1.0 mg/L) in general. The high Cs removal efficiency of bamboo charcoal was maintained in a relatively wide range of temperatures and pHs, supporting that the usage of the bamboo charcoal is feasible for various types of water. Experimental results were similar to the Langmuir adsorption model and the maximum amount of Cs adsorption (qm:mg/g) was 63.4 mg/g, which was higher than those of commercialized adsorbents used in previous studies. The surface coverage (${\theta}$) of bamboo charcoal was also maintained in low when the Cs concentration in water was < 1.0 mg/L, investigating that the Cs contaminated water can be remediated up with a small amount of bamboo charcoal.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2019

This study was conducted to determine the effects of a pre-planting fertilizers with various $NH_4{^+}:NO_3{^-}$ ratios in a coir dust:peatmoss:perlite (3.5:3.5:3.0, v/v/v) medium on the growth of hot pepper (Capsicum annuum L. cv. Nokkwang) plug seedling. Nitrogen levels were fixed to $300mg{\cdot}L^{-1}$ and the $NH_4{^+}:NO_3{^-}$ ratios were varied to 0:100, 27:73, 50:50, 73:27, and 100:0. The 50-cell trays were filled with treatment media containing pre-plant fertilizers, then seeds were sown. After seeds were germinated, the trays were moved to greenhouse and seedlings were feed with 13-2-13 and 20-9-20 fertilizers, alternatively. The changes in pH and EC were measured every week and soil solution for nutrient concentrations were analyzed in week 0, 3, and 7. The measurements of seedling growths as well as analysis of tissue nutrient contents were also conducted in week 7. The varied $NH_4{^+}:NO_3{^-}$ ratios did not influence on the pHs of root media after incorporation of pre-planting fertilizers, but the ECs were heightened as proportion of $NH_4{^+}$ to $NO_3{^-}$ were elevated. During the raising of seedlings, the pHs rose over time in the treatments of 0:100 and 27:73 ($NH_4{^+}:NO_3{^-}$). The concentrations of all macro-elements in root media decreased gradually as seedlings grew in all treatments. The seedling growths 7 weeks after seed sowing were the highest in the treatments of 27:73 and 50:50 ($NH_4{^+}:NO_3{^-}$) and those became worse in the treatments of higher $NH_4{^+}$ ratios than 73%. In terms of inorganic element contents based on the dry weight of above ground tissue, the treatment of 0:100 showed the lowest content of Ca, Mg, Na, Cu, Mn, and Zn. Based on the results, it is desired that $NH_4{^+}$ ratio in pre-planting fertilization is maintained to be 50% or less for the raising of hot pepper plug seedlings.

• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.216-222
• /
• 2006

This study was carried out to select the lactic acid bacteria producing ${\beta}-galactosidase$ (lactase) and investigate the properties of the ${\beta}-galactosidase$. About 100 strains of lactic acid bacteria showing blue colony on the MRS agar medium containing X-gal were isolated from several kinds of Kimchi. Among them, 2 strains were selected as potential ${\beta}-galactosidase$ producers. The selected strains, ET-1 and LA-12, were identified as Lactobacillus fermentum and L. acidophilus, respectively by the analysis of 16S rDNA sequences. They showed relatively high ${\beta}-galactosidase$ activity and cellular viability. Their ${\beta}-galactosidase$ showed the highest activity at $55^{\circ}C$. And the optimum pHs of the enzymes produced by ET-1 and LA-12 were pH 5.5 and pH 7.0, respectively. They were also highly resistant to artificial gastric juice and bile. Two selected strains showed little change of viable cell number for 3 hr incubation in artificial gastric juice, and maintained the viable cell number at $10^8CFU/ml$ for 24 hr in 0.3% oxgall after incubation for 2 hours in artificial gastric juice. Based on these results, ET-1 and LA-12 are expected to be applied in dairy industry.

• Korean journal of food and cookery science
• /
• v.30 no.1
• /
• pp.22-32
• /
• 2014

This study investigated the spicy hot flavor related quality characteristics of baechu (Kimchi cabbage) Kimchi prepared using hot pepper powder in various capsaicin levels during 8 weeks of storage. The pHs in the Kimchi samples were in the optimum range of the pH 4.2-4.5 due to the relatively low storage temperature of $2^{\circ}C$ during the entire storage periods. The L, a and b values of cap-150 sample group were significantly higher compared to those in the other samples at 8 weeks of storage. Grading hotness of the Kimchi was significantly clearly separated when varied levels of hotness for the hot pepper powder were used at 2-4 weeks of storage (p<0.001). Sensory spicy hotness of the cap-40 showed significantly the lowest with values of 4.57-4.38 representing mild hot:, that of cap-85 was medium hot with values of 5.81-6.00; and finally, that of cap-150 showed the values of 6.86-7.14, representing strong hot flavor at 2-4 weeks of storage (p<0.001). The grading of spicy hotness in the Kimchi increased by about one level at the optimal edible periods due to the leaching out of capsaicin from the hot pepper powder for those storage periods. Thus, the increased hotness of the Kimchi in the optimal edible periods should be considered when the desired hotness of the hot pepper is chosen for the Kimchi preparation. The hotness decreased as the organic acids were generated during ripening by the 8th weeks of storage.