• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.631-639
• /
• 2019

Finite element analysis is one of the important methods to study the structural performance. Due to the simplification, discretization and error of structural parameters, numerical model errors always exist. Besides, structural characteristics may also change because of material aging, structural damage, etc., making the initial finite element model cannot simulate the operational response of the structure accurately. Based on Bayesian methods, the initial model can be updated to obtain a more accurate numerical model. This paper presents the work on the field test, modal identification and model updating of a Chinese reinforced concrete pagoda. Based on the ambient vibration test, the acceleration response of the structure under operational environment was collected. The first six translational modes of the structure were identified by the enhanced frequency domain decomposition method. The initial finite element model of the pagoda was established, and the elastic modulus of columns, beams and slabs were selected as model parameters to be updated. Assuming the error between the measured mode and the calculated one follows a Gaussian distribution, the posterior probability density function (PDF) of the parameter to be updated is obtained and the uncertainty is quantitatively evaluated based on the Bayesian statistical theory and the Metropolis-Hastings algorithm, and then the optimal values of model parameters can be obtained. The results show that the difference between the calculated frequency of the finite element model and the measured one is reduced, and the modal correlation of the mode shape is improved. The updated numerical model can be used to evaluate the safety of the structure as a benchmark model for structural health monitoring (SHM).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.345-349
• /
• 2000

$Al_2O_3/ZrO_2$eutectic fibers were grown by micro-pulling down technique and investigated their microstructure as a function of solidification rate. $Al_2O_3/ZrO_2$eutectic fibers 0.2~2 mm in diameter and 500 mm in length have been grown with a pulling rate of 0.1~15 mm/min. The eutectic microstructures changed as a function of fulling rate from rod-shaped to cellular shape containing some thin lamellar pattern via uniform lamellar structure. Typical lamellar thickness decreased from about 380 nm to 110 nm as the pulling rate increased from 1 mm/min to 15 mm/min. The interlamellar spacing fitted with the inverse-square-root dependence on pulling rate according to $\lambda$= $1{\times}v^{-1/2}$, where $\lambda$ has the dimension in $\mu\textrm{m}$ and v is $\mu\textrm{m}$/s. Hardness value reached 13.1 GPa at 15 mm/min of pulling rate and tensile strength 900 MPa at 10 mm/min were also increased as the interlamellar spacing decreased.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.337-348
• /
• 2023

Shear wall is commonly used as a lateral force resisting system of concrete mid-rise and high-rise buildings, but it brings challenges in providing relatively large space throughout the building height. For this reason, the structure system where the upper structure with bearing, non-bearing and/or shear walls that sits on top of a transfer plate system supported by widely spaced columns at the lower stories is preferred in some regions, particularly in low to moderate seismic regions in Asia. A thick reinforced concrete (RC) plate has often been used as a transfer system, along with RC transfer girders; however, the RC plate becomes very thick for tall buildings. Applying the post-tensioning (PT) technique to RC plates can effectively reduce the thickness and reinforcement as an economical design method. Currently, a simplified model is used for numerical modeling of PT transfer plate, which does not consider the interaction of the plate and the upper structure. To observe the actual behavior of PT transfer plate under seismic loads, it is necessary to model whole parts of the structure and tendons to precisely include the interaction and the secondary effect of PT tendons in the results. This research evaluated the seismic behavior of shear wall-type residential buildings with PT transfer plates for the condition that PT tendons are included or excluded in the modeling. Three-dimensional finite element models were developed, which includes prestressing tendon elements, and response spectrum analyses were carried out to evaluate seismic forces. Two buildings with flat-shape and L-shape plans were considered, and design forces of shear walls and transfer columns for a system with and without PT tendons were compared. The results showed that, in some cases, excluding PT tendons from the model leads to an unrealistic estimation of the demands for shear walls sit on transfer plate and transfer columns due to excluding the secondary effect of PT tendons. Based on the results, generally, the secondary effect reduces shear force demand and axial-flexural demands of transfer columns but increases the shear force demand of shear walls. The results of this study suggested that, in addition to the effect of PT on the resistance of transfer plate, it is necessary to include PT tendons in the modeling to consider its effect on force demand.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.765-770
• /
• 2014

This paper describes the study on a method for improving the structural durability of bolted joints applied to a composite bogie frame. In this study, three bolted joints with and without inserts and screw threads were selected for determining the effect of the inserts, using experiment and analysis. The structural performances of the proposed bolted joints were compared and evaluated using the test method prescribed by the ASTM D5961 standard. The results revealed that the bolted joint having an insert shape without the screw thread offered improved durability for application to a composite bogie frame. Furthermore, the structural integrity of the frame comprising the bolted joints was evaluated using finite element analysis according to the JIS E 4207 standard. The Tasi-Wu and Von-Mises failure criteria were used for determining the failure of the composite structure and bolted joints, respectively. A sub-modeling technique was introduced for investigating the performance of the bolted joints in greater detail. The analysis results demonstrated that the Tasi-Wu failure index of the composite structure near the bolted joints was reduced by approximately one-half after applying an insert without the screw thread. This implies that the structural durability of the bolted joints of a composite bogie frame could be improved by using a metal insert without the screw thread.

• The Korean Journal of Pesticide Science
• /
• v.7 no.2
• /
• pp.100-107
• /
• 2003

To improve the growth inhibitory activity against the shoot and root of rice plant (Oryza sativa L) and barnyard grass (Echinochloa crus-galli), a series of N-substituted phenyl-3,4-dimethylmaleimdes derivatives as substrates were synthesized and then their the inhibitory activities of protoporphyrinogen oxidase (1.3.3.4), protox were measured. The quantitative structure-activity relationships (QSAR) between structures and the inhibitory activities were studied quantitatively using the 2D-QSAR method. And also, molecular sharp similarity between the substrate derivatives and protogen, substrare of protox enzyme were studied. The activities of the two plants indicated that barnyard grass had a higher activity than the rice plant and their correlation relationships have shown in proportion for each. Accordingly, the results of SARs suggest that the electron donating groups as $R_2=Sub.X$ group will bind to phenyl ring because the bigger surface area of negative charged atoms in the substrate molecule derivatives may increase to the higher the activity against barnyard grass. Based on the molecular shape similarity, when the derivatives and protogen, subsbrate of protox enzyme were superimposed by atom fitting, the similarity indices (S) were above 0.8 level but the correlation coefficients (r) between S values and the activities showed not good.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.880-885
• /
• 2008

Spray pyrolysis was applied to prepare spherical silica particles with mesopores of a regular structure. The physical properties such as surface area, pore size, pore structure, particle size, and morphology were studied by BET, SEM, SAXS, and DLS analysis. At a fixed gas flow rate, the BET surface area changed from 200 to $1,290m^2/g$ as changing the CTAB/TEOS molar ratio from 0.05 to 0.3. At a fixed CTAB/TEOS ratio, the surface area of silica particles was varied from 1,062 to $1,305m^2/g$ with changing the gas flow rate from 10 to 40 l/min. The average pore size measured by BJH desorption was about $21{\sim}23{\AA}$ and not significantly influenced by the CTAB/TEOS ratio and the gas flow rate. Finally, the highest surface area which was $1,305m^2/g$ were obtained when the CTAB/TEOS ratio and the gas flow rate were 0.2 and 20 l/min, respectively. According to SAXS analysis, the prepared silica particles showed a strong peak at $2{\theta}=2.6^{\circ}$ and two minor peaks around $2{\theta}=4.4^{\circ}$ and $5.1^{\circ}$, which are due to regular mesopores of hexagonal structure. The morphology of silica particles prepared were spherical shape and the average particle size was $1.0{\mu}m$.

• Korean Journal of Acupuncture
• /
• v.26 no.1
• /
• pp.79-84
• /
• 2009

Objective : In 1960's Bonghan Kim's team found BongHan(BH) ducts which were presumed as acupuncture meridians and BH corpuscles. They asserted Bonghan theory and SanAl theory which was involved in cell division and cell restoration. However, many other experiments which had been operated to demonstrate and find the existence of BH ducts had failed because of the secret of blue stain drugs. During the last several years, BongHan theory has been revived through experimental researches to find the anatomical structures of BH ducts and corpuscles by Soh's Biomedical Physics Lab. Soh's research team used the staining with Janus Green B, Alcian blue, nanoparticles and Acridine Orange. We used DAPI staining to find the existence of BH ducts and the corpuscles and to observe nuclear arrangement. Methods : We used japan white rabbits as experimental animals. BH ducts and corpuscles were stained with DAPI. The nucleus configuration in BH ducts stained with DAPI were observed with microscope. Results : In this study, we found thread like structures in silver white color distinguished from the blood vessels, nerves and lymph vessels. These thread like vessels in the linear duct shape were connected to same colored mass in the ball shape. Thread like structures we found could be separated easily from the surrounding other organ mass. The nuclei of the thread like structure in DAPI staining, are about 10${\sim}$20${\mu}m$ length, in rod shape and linear arrangement. Conclusion : We concluded that the thread like structure we found was same vessel reported by Soh's research team, BongHan ducts and corpuscle.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.211-214
• /
• 2015

$Cr_2O_3$ nanoparticles were prepared via one-step reactive laser ablation of Cr in oxygen. The metastable $CrO_2$ phase was obtained through the subsequent oxidation of $Cr_2O_3$ nanoparticles under $O_2$ with gas pressures of up to 40 MPa. The as-prepared $Cr_2O_3$ nanoparticles are spherical or rectangular in shape with sizes ranging from 20 nm to 50 nm. High oxygen pressure annealing is effective in producing meta-stable $CrO_2$ from as-dried $Cr_2O_3$ nanoparticles, and the $Cr_2O_3$ nanoparticles exhibit a weak ferromagnetic behavior with an exchange bias of up to 11 mT that can be ascribed to the interfacial exchange coupling between uncompensated surface spins and the antiferromagnetic core. The $Cr_2O_3/CrO_2$ nanoparticles exhibit an enhanced saturation magnetization and a reduced exchange bias with an increasing faction of $CrO_2$ due to the elimination of uncompensated surface spins over the $Cr_2O_3$ nanoparticles when exposed to a high pressure of $O_2$ and/or possible phase segregation that results in a smaller grain size for both $Cr_2O_3$ and $CrO_2$.

• Applied Microscopy
• /
• v.15 no.1
• /
• pp.71-85
• /
• 1985

The ultrastructure on the dorsal vessel of 5-day-old cabbage butterfly, Pieris rapae L., was carried out using the transmission and scanning electron microscope. The results are as follows. 1) The aorta. The aorta is simple tubular type and consists of the inner and outer membrane of the myocardium and thick myocardium is located between them. However the inner membrane with $0.26{\mu}m$ thickness and outer membrane with $0.08{\mu}m$ are composed of fibrous materials, the former is composed of low and high densed fibrous materials and the latter appears homogeneous layer. The myocardium consists of typical striated muscles. The sarcomere with $1.6{\mu}m$ length and in cross section, each thick filaments are surrounded by $7{\sim}8$ thin filaments. The intercalated disc is joining the end of the two muscle cells, desmosomes and septate junctions are appeared between the neighboring muscle cells. 2) The heart. The heart composing of myocardium enclosed by its inner and outer membrane as the aorta has a series of well formed segmental chamber. The arrangement of myofilaments, cell adhensions and membrane elements are observed as same as at the aorta. The inner membrane of the heart is deeply invaginated into the myocardium than the outer membrane and a lot of well developed mitochondria with rod shape are aggregated in the folds. The longitudinally and transversely oriented tubule system formed by invagnation of the sarcolemma into the muscle bundle is built up dyad with the sarcoplasmic reticulum as the aorta. The slit is formed by deeply invagination of the inner membrane of myocadium toward the muscle layer and then the inner and outer membrane of myocardium are fused. Therefore, the ostium is formed between the myocardium and situated at the lateral side of the myocardium.

• Journal of Plant Biotechnology
• /
• v.40 no.1
• /
• pp.55-58
• /
• 2013

Immature embryos of Glycine max L. was cultured on Murashige and Skoog's (MS) medium supplemented with 1 mg/L 2,4-dichlorophenoxy acetic acid (2,4-D). After 6 to 8 weeks of culture, immature embryos produced somatic embryos. Of somatic embryos, two cotyledonary embryo (14%), one cotyledonary embryo (37%), fused cotyledonary embryo (43%), and stunted globular embryos (6%) were observed. The procambial strand of cotyledons originated from circular procambial tissues of lower hypocotyl. The circular procambial tissues were independently divided into one or two procambial strand at the edge of cotyledonary-node, and then connected to each cotyledon to form somatic embryos with one or two cotyledons. When cotyledon was a fused type, the circular procambial strand in lower hypocotyl was continuously connected to the cotyledon. Also, somatic embryos with two cotyledons developed a functional shoot apex with the tunica-corpus structure. In contrast, somatic embryos with one or fused cotyledon formed an abnormal shoot apex without the tunica-corpus structure or with non-dome shape in the inter-cotyledonary area. These results indicated that the variation of cotyledon in somatic embryos is closely related to procambial differentiation and shoot apical meristem development.