• 제목/요약/키워드: L-flat

검색결과 492건 처리시간 0.028초

Improved Astaxanthin Availability due to Drying and Rupturing of the Red Yeast, Xanthophyllomyces dendrorhous

  • An, Gil-Hwan;Song, Jae-Yeon;Kwak, Woong-Kwon;Lee, Bong-Duk;Song, Kyung-Bin;Choi, Jae-Eul
    • Food Science and Biotechnology
    • /
    • 제15권4호
    • /
    • pp.506-510
    • /
    • 2006
  • To be used as a source of astaxanthin by animals, the red yeast Xanthophyllomyces dendrorhous needs to be dried and the cell wall ruptured. Spray-drying and flat-roller milling successfully prepared the yeast as a feed additive with little loss of astaxanthin. Spray-drying successfully dried the yeast with negligible decomposition of astaxanthin compared to drum-drying. By repeated milling with a flat-roller mill, astaxanthin extracted with ethanol increased from 0.01 to 1.31 mg astaxanthin/g yeast. This method did not decompose astaxanthin in contrast to chemical digestion of the cell wall. Flat-roller milling effectively flattened and cracked the dried cells. Astaxanthin in yeast prepared by spray-drying and flat-roller milling was well absorbed by animals. Specifically, when spray-dried and milled yeast was supplied in the feed (40 mg astaxanthin/kg feed), astaxanthin was successfully absorbed (1,500 ng/mL blood and 1,100 ng/g skin) by laying hens.

철강 하니콤구조의 접합강도 (Bond Strength of Steel honeycomb Structure)

  • 송건;홍영환
    • 열처리공학회지
    • /
    • 제16권4호
    • /
    • pp.197-204
    • /
    • 2003
  • Honeycomb structure has been fabricated by brazing method using 0.1 wt%C and 1.0wt%C carbon steel core and STS304 stainless steel face sheet. Core shear strength ratio in W and L directions was 1:1.03 in 7 mm cell size, whereas 1:1.45 in 4 mm cell size. Flexural strength on face sheet was 166.4 MPa (0.1 wt%C, W direction), 171.1 MPa (0.1 wt%C, L direction), and 120.2 MPa (1.0 wt%C, W direction) in 7 mm cell size. And in 4mm cell size specimen, it was 169.2 MPa (0.1 wt%C, W direction), 224.2 MPa (0.1 wt%C, L direction). This means that flexural strength of 0.1 wt%C core material was higher than that of 1.0wt%C core material, which was contrary to expectation. SEM and EDS analysis represented that grain boundary diffusion had occurred in0.1 wt%C core, but no grain boundary diffusion in 1.0 wt%C core. And corrugated surface of 0.1 wt%C core was flat, whereas that of 1.0 wt%C core was not flat. As a result, contact area between two 1.0 wt%C cores was much less than that of 0.1 wt% cores, It is thought to be main reason for lower flexural strength of 1.0 wt%C core.

Measured aerodynamic coefficients of without and with spiked blunt body at Mach 6

  • Kalimuthu, R.;Mehta, R.C.;Rathakrishnan, E.
    • Advances in aircraft and spacecraft science
    • /
    • 제6권3호
    • /
    • pp.225-238
    • /
    • 2019
  • A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.

새만금 조간대 표층퇴적물의 성분원소 함량과 지화학적 특성 (Geochemical Composition of Surface Sediments from the Saemangeum Tidal Flat, West Coast of Korea)

  • 조영길;류상옥;구영경;김주용
    • 한국해양학회지:바다
    • /
    • 제6권1호
    • /
    • pp.27-34
    • /
    • 2001
  • 전라북도 서해안의 새만금 조간대에서 채취한 38개 표층퇴적물에서 주성분 원소(Al, Fe, Mg, Ca, Na, K, Ti)와 미량원소(P, Mn, Ba, Sr, V, Cr, Co, Cu, Ni, Zn, Pb)를 분석하였다. 분석된 원소의 함량은 우리나라 타 조간대 퇴적물에서 보고된 값보다 전반적으로 낮았으며, Ba와 Pb를 제외한 모든 원소가 지각물질의 평균함량에 미달하였다. 함량의 변화는 대부분의 원소에서 <20%(${\sigma_x/\overline{x}$)로 비교적 작았으며, 주성분 원소의 Ca와 미량금속의 Ba, Cu 및 Mn이 각각 81%, 62%, 43% 및 33%로 가장 컸다. 공간적으로는 상부조간대에서 함량이 높은 원소와 지역간 차이가 뚜렷하지 않은 원소로 구분되었으며 , 이러한 분포를 결정짓는 가장 중요한 요인은 입도와의 관련성이었다. 입도 의존적인 경향을 나타낸 Al, Fe, Mg, Ti, Pi Mn, V, Co, Cr, Cu, Ni 및 Zn의 함량은 조간대의 상부로 갈수록 증가하였으며, 따라서 이들 원소의 분포는 조수 퇴적작용에 따른 퇴적물의 입도 분화에 의해 조절되는 것으로 판단된다. 한편, 입도와의 관련성이 미약한 Ca와 Sr, Na, K, Ba 및 Pb의 분포는 조립한 입도의 퇴적물에 많이 포함된 탄산염 및 규산염 광물의 영향을 반영하는 것으로 파악되었다.

  • PDF

새만금지역 하구갯벌의 유기물 분해능력 평가 (Estimation of Decomposition Capacity for Organic Matter in Tidal Flat Sediments at Saemankeum Area)

  • 김종구;유선재
    • 한국환경과학회지
    • /
    • 제10권5호
    • /
    • pp.315-321
    • /
    • 2001
  • This study was conducted to estimate the decomposition capacity for organic matter by microbe of tidal flat sediments (Hajae, Dongjin and Mankyung). The decomposition rate constants (K') have been determined by Thomas slope method and compared with the values of each tidal flats. The decomposition rates of organic matter by microbe were initially very slow, but at the end of 12 hours, very sharply increased. The values of decomposition rate constant for Dongjin, Mankyung and Hajae tidal flat sediment were 1.364$day^{-1}$/, 1.080d$day^{-1}$ and 0.735$day^{-1}$, respectively. The decomposition rate constant of Dongjin tidal flat sediment which affected by livestock wastewater was higher than others. The decomposition quantity (mg/g/day) of organic matter by microbe of tidal flat sediments was 0.4mg/g/day for Dongjin, 0.36mg/g/day for Mankyung and 0.36mg/g/day for Hajae. The average of decomposition quantity was 0.37mg/g/day. To calculate purification capacity (kg/ha) of organic matter by microbe, we applied to two assumption ; 1) biological action by microbe is occur within 0.1cm under surface 2) specific gravity of sediment are 2.5g/$\textrm{cm}^2$. The purification capacity of organic matter by microbe of tidal flat sediment was calculated to 9.25kg/ha. The relationships between decomposition rate constant (K') and ignition loss (I. L), chemical oxygen demand by sediment (CO $D_{sed}$), total carbon(TC), silt and clay as index of organic matter were a high positive($R^2$=0.97~1.00).

  • PDF

후방 추체 경유 신전 절골술 - 증 례 보 고 - (Posterior Transvertebral Extension Osteotomy - A Case Report -)

  • 정호;김용석;박문선;하호균;이종선;김주승
    • Journal of Korean Neurosurgical Society
    • /
    • 제29권9호
    • /
    • pp.1262-1266
    • /
    • 2000
  • Objective : Flat back syndrome constitutes a syndrome complex characterized by the loss of normal lumbar lordosis. Various techniques of correction for flat back syndrome have been reported. Posterior extension osteotomy has certain drawbacks. Forceful hyperextension of the spine may result in vascular complications such as rupture of the aorta or the inferior vena cava and stretching of superior mesenteric artery, and pseudoarthrosis. We describe a rationale and technique of transvertebral posterior extension osteotomy to avoid complications of posterior extension osteotomy and to achieve an correction of 30 degrees of flat back syndrome. Method : A 63-year-old woman with degenerative lumbar kyphosis presented with low back pain, thigh pain, knee pain and walking difficulty. Transpedicular fixation from L1 vertebra to S1 vertebra was accomplished for lumbar degenerative kyphosis. After 6 months, the patient presented with flat back syndrome. A second operation was performed with transvertebral posterior extension osteotomy. Result : With short segemental fusion, early bone fusion and correction of 30 degrees were achieved. Conclusion : Transvertebral posterior extension osteotomy provide an 30-60 degrees of correction of flat back syndrome. This technique is considered to be good method for the revision of lumbar degenerative kyphosis.

  • PDF

Pyribenzoxim 1% 유제(乳劑)의 경엽(莖葉) 부착량(附着量)과 약효(藥效), 약해(藥害)의 관계(關係) (Foliar Retention of the Herbicide Pyribenzoxim(1% EC), and Its Effects on Herbicidal Activity and Rice Phytotoxicity)

  • 구석진;김정수;이재환
    • 한국잡초학회지
    • /
    • 제18권4호
    • /
    • pp.304-313
    • /
    • 1998
  • 유제(乳劑)를 살포하였을 때 벼와 피에 대한 경엽부착량을 다양한 조건에서 조사하고 그것을 약효 및 약해와 연관시켜 보았다. 경엽부착량의 측정은 형광물질인 rhodamine B를 이용하였으며 그 결과는 아래와 같았다. 1. 피에 대한 경엽부착량은 표준처리조건 (약량; 30g ai/ha, 처리물량; 1000 L/ha)에서 disk-type 노즐 (국내 수동배부식 분무기용)로 전착제 가용시, 비가용시, flat-fan 노즐 (구미 boom-sprayer용)로 전착제 가용시, 비가용시, 경엽 생체중 1g 당(當) 각각 2.3-2.7, 1.4-1.5, 0.6-0.7, $0.3-0.5{\mu}g$ 이 었다. 2 처리물량을 고정시키고 농도를 변화시킨 경우와 농도를 고정시키고 처리물량을 변화시킨 경우에 부착량 증감의 기울기는 각각 1.0-1.8, 1.6-2.4로 후자의 경우가 변동의 폭이 더 컸다. 3. 피에 대한 경엽부착량은 약효와 밀접한 연관이 있었으며, 90% 방제를 나타내는 부착량은 경엽 생체중 1g 당(當) 약 $0.8{\mu}g$이었고, 그 이하의 부착량에서는 약효가 거의 직선적으로 감소하였다. 4. 벼에 대한 경엽부착량은 표준처리조건에서 disk-type 노즐로 전착제 가용시, 비가용시, flat-fan 노즐로 전착제 가용시, 비가용시, 경엽 생체중 1g 당(當) 각각 1.9-2.3, 1.2-1.3, 0.6-0.9, $0.3{\mu}g$이었다. 5. 처리물량을 고정시키고 농도를 변화시킨 경우와 농도를 고정시키고 처리물량을 변화시킨 경우에 부착량 증감의 기울기는 각각 1.0-2.8, 1.3-4.4로 파에서와 마찬가지로 후자의 경우가 변동의 폭이 더 컸다. 6. 4배 이내의 약량(농도) 또는 살포량 증가 시에 벼에 대한 pyribenzoxim의 경엽부착량의 증가나 노즐, 전착제 유무에 의한 차이는 약해와 관련이 없었다. 7. 타(他)약제와 혼용시 벼에 대한 pyribenzoxim의 경엽부착량은 약제에 따라 약 30-50% 증가하는 경향이었다.

  • PDF

중력하중으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능 (Seismic Performance of Gravity-Load Designed Post-Tensioned Flat Plate Frames)

  • 한상환;박영미;유연호
    • 한국지진공학회논문집
    • /
    • 제14권3호
    • /
    • pp.31-38
    • /
    • 2010
  • 본 연구에서는 기둥을 관통하는 슬래브 하부 철근이 중력하중만으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능에 미치는 영향을 평가하였다. 중 약진 지역에서 건물은 흔히 중력하중만을 고려하여 설계되고 있다. 본 연구에서는 중력하중으로 설계된 PT 플랫플레이트 골조의 내진성능에 집중되고 있다. 이를 위하여, 3,6,9층 PT 플랫플레이트 골조는 중력하중만으로 설계하였다. 철근콘크리트 플랫플레이트 골조에서는 취성적인 붕괴를 예방하기 위해서는 기둥을 관통하는 연속된 슬래브 하부철근이 위치하여야 한다. 그러나 PT 플랫플레이트 골조에서는 슬래브 하부 철근에 대해 ACI 318-05에서는 특별한 언급이 없기 때문에 흔히 생략하고 있다. 본 연구는 대산건물을 비선형 시간이력해석 으로 골조 모델의 내진성능에 대해 평가한다. 비선형 시간이력해석은 6개의 지진과 2개의 다른 위험수준 (475, 2475년 주기), 3개의 다른 지역 (보스턴, 시애틀, LA)을 사용하였다. 해석모델은 PT슬래브-기둥 접합부의 파괴 메카니즘과 비선형 거동을 살펴보기 위해 개발되었다. 본 연구는 중력하중으로 설계된 PT 플랫플레이트 골조가 몇몇 내진저항 능력을 보여주고 있다. 또한, PT 플랫플레이트 골조의 내진성능은 기둥을 관통하는 슬래브 하부철근이 위치할 때 눈에 띄게 향상되었다.

조간대(갯벌)에서의 탄성파 탐사: 민어포 지역의 사례 (Seismic Imaging of a Tidal Flat: A Case Study for the Mineopo Area)

  • 주형태;김한준;이광훈;이상훈;정백훈;조현무;장남도
    • 지구물리와물리탐사
    • /
    • 제11권3호
    • /
    • pp.197-203
    • /
    • 2008
  • 서해안 민어포 조간대 지역에서 해수면변동과 연관된 갯벌의 퇴적구조를 파악하기 위해 고해상 천부 육상 탄성파탐사를 실시하였다. 음원으로는 5 kg 무게의 망치를 사용하였으며, 48채널의 100-Hz 지오폰을 이용하여 서로 수직한 두 측선에 대하여 1 m간격으로 총 795 m shot의 자료를 획득하였다. 갯벌 표면이 물에 의해 포화된 상태를 이루고 있어 강성률이 매우 낮아 ground roll의 발생이 억제되었으며 기록되는 반사신호의 속도가 1500m/s 이상이므로 일반적인 육상 천부탄성파 탐사시에 기록되는 저속도의 잡음과 분리하기가 쉽다. 그 결과 일반적이 육상탐사에 비해 자료의 신호 대 잡음비가 상당히 높고 해상도가 우수한 탄성파 단면을 얻을 수 있었다. 중합단면을 해석해 보면 조사지역의 음향기반 암 상부의 퇴적층은 5 개의 층서로 나뉘어 진다. 지난 빙하기때 침식된 층 위에 홀로세 이후 해수면 상승과 관련하여 형성된 갯벌의 구조를 연속적으로 파악할 수 있었다.

인공위성 SAR 영상을 이용한 몽산포 조간대의 Ridge-Runnel 및 연흔 관찰 (Observation of Ridge-Runnel and Ripples in Mongsanpo Intertidal Flat by Satellite SAR Imagery)

  • 장소영;한향선;이훈열
    • 대한원격탐사학회지
    • /
    • 제26권2호
    • /
    • pp.115-122
    • /
    • 2010
  • 이 논문에서는 Envisat ASAR, JERS-1 SAR 영상과 현장조사 자료를 이용하여 ridge-runnel 구조 및 연흔이 잘 발달해 있는 태안 몽산포 조간대를 분석하였다. Envisat ASAR 영상에서는 밝고 어두운 띠가 해안선과 평행한 방향으로 3-5회 반복되어 관찰되었으며, 이는 노출된 조간대에서 ridge-runnel 구조로 판단하였다. 배수가 이루어져 지표잔존수가 없고 연흔이 발달해있는 runnel에서는 강한 후방산란을 보이고, 연흔이 없는 ridge나 배수가 잘 되지 않아 연흔이 물속에 잠겨 있는 runnel에서는 산란이 거의 없다. 반면에 JERS-1 SAR 영상에서는 조간대 전체가 매우 약한 신호를 보였으며, ridge-runnel 구조가 전혀 관찰되지 않았다. 현장에서 측정된 연흔의 파장은 대부분 4-10 cm 범위 내에 분포하며, 이는 C-밴드인 Envisat ASAR 영상에서 Bragg 산란의 첫 번째 모드에 의한 강한 후방산란을 일으키는 조건이 되지만, L-밴드인 JERS-1 SAR 영상에서는 그렇지 않다. 본 연구에서는 SAR 영상을 이용하여 광학영상으로는 쉽게 관찰되지 않는 ridge-runnel 구조 및 연흔이 발달된 조간대의 분석이 가능함을 보였으며, 향후 조간대 퇴적상 연구에 SAR 영상이 다양하게 이용될 수 있을 것으로 기대한다.