• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.177-180
• /
• 2009

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. If slot length is shot, pressure oscillation of longitudinal mode is amplified by cylinder part after middle phase of total burn time. A study has analyzed pressure oscillation of longitudinal mode at spectrum and acoustic modal analysis at pressure of result on static firing test.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.9-16
• /
• 2017

In this paper, sub-microwave oscillator sensor is proposed to non-invasively monitor the glucose concentration level of the human biological tissue by oscillation frequency variation. Inductive slot in the ground plane of the microstrip line is combined with the biological tissue, to realize the resonator as a part of the oscillator sensor. The phantom box mimicking the human tissue is introduced for simulation of the resonator which resonance frequency correspondingly shifts up on three step glucose concentration levels(0, 400, 800 mg/dL). Oscillator sensor circuit is fabricated as a prototype. Pig tissues instead of human is used. Oscillation frequency shift of about 14 MHz per glucose level of 400 mg/dL has been successfully measured around 1,100 MHz. This proves that the proposed sensor is applicable to a blood glucose sensor.

• English Language & Literature Teaching
• /
• v.11 no.1
• /
• pp.137-154
• /
• 2005

The purpose of this paper is to analyze vowel lengthening triggered by resyllabification. In general, short vowels become long when a following consonant is deleted, as shown in stehli 'steel' > st$\bar{e}$li and *fimf 'five' > five. We can account for the phenomenon in a straightforward way within the framework of CV phonology (Clements & Keyser, 1983) : deletion of a coda consonant C slot and then the preceding vowel spreads onto it, resulting in a long vowel. The analysis, however, cannot hold for words like ealhes 'temple', where deletion of an onset segment eventually triggers vowel lengthening in the preceding syllable. In order to account for this, I propose resyllabification. That is, ealhes first becomes eales by /h/-deletion. Next, the /l/ in coda is resyllabified as the onset of the following syllable, leaving its C slot unoccupied. Finally, the vowel spreads onto the empty slot, producing a long vowel.

• Wind and Structures
• /
• v.10 no.4
• /
• pp.315-346
• /
• 2007

A preceding companion article introduced the slot jet approach for large-scale quasi-steady modelling of a downburst outflow. This article extends the approach to model the time-dependent features of the outflow. A two-dimensional slot jet with an actuated gate produces a gust with a dominant roll vortex. Two designs for the gate mechanism are investigated. Hot-wire anemometry velocity histories and profiles are presented. As well, a three-dimensional, subcloud numerical model is used to approximate the downdraft microphysics, and to compute stationary and translating outflows at high resolution. The evolution of the horizontal and vertical velocity components is examined. Comparison of the present experimental and numerical results with field observations is encouraging.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.121-124
• /
• 2008

In this paper, we will design a 800MHz broadband antenna after a problem of the narrow bandwidth is improved. This multiple band antenna unifies the CDMA(Code Division Multiple Access), GSM(Global System for Mobile telecommunication) and TRS(Trunked Radio System) band in the UHF bandwidth, and then it is possible at the shore base station or repeater as the commercial use. It used the duplex resonance effect It had the L-shaped feeding structure which adds the V-slot. And it improved profit using stack structure. It was measured that the frequency bandwidth of the designed antenna which is planed $792{\sim}1040MHz$ with 248MHz(33%). And the antenna gain is 9.4dBi, 3dB beam width $60^{\circ}$ in radiation pattern.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.749-751
• /
• 1998

In this study, the wind-mill type ultrasonic motor was fabricated, and then revolution and temperature characteristics of the ultrasonic motor were measured. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed in each of thickness. Among sixteen's ultrasonic motors, heat loss on applied voltage was much at stator of the highest resonant point, but heat loss on applied voltage was almost neglected at the lowest resonant point of stator. The thickener thickness of elastic body, revolution speed was decreased. The more slot of elastic body, revolution speed was increased. Applied voltage was changed from $10V_{max}$ to $100V_{max}$. When applied voltage was under $20V_{max}$, ultrasonic motor was not rotated. When applied voltage was over $90V_{max}$, revolution of ultrasonic motor was saturated. Maximum revolution speed was 510[rpm].

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1712-1720
• /
• 1989

We propose a new radiating structure composed of a strip and a slot excited by an ideal current source, and electromagnetic analysis for the structure is presented. By the analysis procedure which is based upon equivalence formulated. Through the numerical computations to solve the equations by employing the method of moments, we ascertained that the suitable choice of the location and the size of strip guarantee the improvement of the radiation characteristics of antenna.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.297-301
• /
• 2002

본 논문에서는 광대역 원형 링슬롯 안테나의 광대역 특성이 일어나는 메커니즘 연구를 통해 새로운 광대역 안테나 설계 및 분석에 도움을 줄 수 있도록 하였다 먼저 기존의 광대역 안테나 및 공진회로 개념을 이용하여 새로운 광대역 안테나의 이론적인 분석을 하도록 하였으며, 기존의 광대역 안테나를 설계하는 방법(자기유사구조, 자기상보구조, 길이보다 각을 강조한 구조, 두꺼운 도체를 사용하는 구조 등)외에 최근들어 많이 연구되고 있는 안테나의 Q값을 줄이는 방법에 대해 분석 및 정리하고 본 원형 링슬롯 안테나의 복사기와 급전선사이에서 광대역이 일어나는 메커니즘에 대해서 연구하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.106-111
• /
• 2003

In this Paper, an improved protocol is proposed by supplementing a control station for transmission cycle management and slot-extension function. This protocol is proposed to complement the shortcomings of the conventional L-Expressnet protocol which is used for round robin process in bus topology. We analyzed the improved protocol in channel utilization viewpoint and compared the result with that of the conventional Protocol. From this result, we showed that the channel utilization of the improved protocol is superior to that of the conventional protocol when a maximum normalized propagation delay is increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5827-5831
• /
• 2011

In this paper, 5Ghz microstrip patch antenna for wireless LAN is designed, fabricated, and measured. To obtain wide bandwidth and high gain, antenna parameters such as patch size(W, L), the length of the slot(C), and the slot width(D) are simulated by HFSS(High Frequency Structure Simulator). From these parameters optimized, the microstrip patch antenna is fabricated using FR-4 substrate. The measured results of the antenna are as follows: The center frequency of 5.2 GHz, insertion loss of -41.17dB, bandwidth of 258MHz, and VWSR of 1.1.