• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.299-300
• /
• 2014

본 논문에서는 넓은 입력전압 및 부하 변동에 적합한 대전력용 $L^3C$ 공진형 컨버터를 제안한다. 제안하는 컨버터는 직렬공진탱크와 병렬공진탱크를 조합하여 승압과 강압이 가능하며 다른 공진형 컨버터에 비해 적은 주파수 변동에도 넓은 입출력 범위를 만족 시킬 수 있다. 제안하는 컨버터는 삼차권선을 이용하여 공진 탱크를 구성하기 때문에 공진 커패시터에 흐르는 전류를 최소화 할 수 있으며 공진에 참여하는 인덕터는 변압기의 누설 인덕턴스를 사용하여 소자를 최소화 할 수 있다. 제안하는 컨버터의 스위칭 특성의 경우 모든 스위치가 ZVS 턴온을 달성하고 다이오드는 ZCS 턴온/턴오프가 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1016-1019
• /
• 1993

A low-pass L-C filter has been adopted for conversion of frequency variable 3 phase PWM waveform to a grid power line and it is used for attenuation of harmonics in the VSI PWM Inverter. A optimum design of the L, C parameters was derived. The result of the study show that the inductor L seems to have a certain air gap for linear I-V characteristics and the resonant frequency of the filter must be set below the 5th harmonics of the grid power line. Further, the voltage drop in L must be within a adequate limit compared to grid power voltage.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권9호
• /
• pp.459-463
• /
• 2004

In this study, the (l-x)$TiTe_3O_{8}$-x$MgTiO_3$ ceramics were investigated to obtain the improved dielectric properties of a high temperature stability and a sintering temperature of less than $900^{\circ}C$ which was necessary for the LTCC. According to the X-ray diffraction patterns of the (l-x)$TiTe_3O_{8}$-x$MgTiO_3$(x=0∼1) ceramics, the columbite structure of $TiTe_3O_{8}$ and ilmenite structure of $MgTiO_3$ were coexisted. Increasing the $MgTiO_3$ mole ratio(x), the density and dielectric constant were decreased and temperature coefficient of resonant frequency was moved to the negative direction and the quality factor was increased. In the case of the 0.6$TiTe_3O_{8}$-0.4$MgTiO_3$ ceramics sintered at $830^{\circ}C$ for 3hr., the microwave dielectric properties were $\varepsilon_{\gamma}$=29.3, Q${\times}$$f_{\gamma}$=39.600GHz and $\tau$$_{f}$=+9.3ppm/$^{\circ}C$.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.124-128
• /
• 1999

We report microwave properties of high-T$_c$ superconducting (HTS) microstrip antennas without impedance matching circuits, where the impedance mismatching is obvious under the critical temperature (T$_c$). The superconducting thin films used in this report were YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on MgO substrates produced by pulse laser deposition (PLD) technique. At around T$_c$, 86 K the reflection coefficient rapidly drops, and the standing wave ratio (SWR) becomes almost unity, and the characteristic impedance based on the Smith chart is nearly 50 ${\Omega}$. The reflection coefficient and the SWR of the HTS microstrip antenna were - 62.52 dB and 1.0015, respectively, at the resonant frequency of 11.812 CHz at 86 K.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.481-490
• /
• 2021

In the ultrasonic welding machine, when the load fluctuates, the L and C of the piezo element in the oscillation part change. As a result, the resonant frequency is changed, so it is necessary to match the operating frequency of the ultrasonic welding machine to the new resonant frequency. That is, in order to maximize the output of the oscillation unit of the ultrasonic welding machine, it is inevitable to follow the resonance frequency. Accordingly, many methods for following the resonant frequency are being actively studied. In addition, in order to check the effect of external inductance on the operation of the ultrasonic welding machine, The equivalent circuit of the piezo element was analyzed by including the external inductance for resonance in the equivalent circuit of the piezo element, and the method of selecting an appropriate inductance was described. In this paper, we propose a new system that allows the switching frequency of the inverter to tracking the resonance frequency even if the resonance frequency is changed due to the load of the ultrasonic welding machine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.227-230
• /
• 1991

This paper discussed with a voltage-fed Type high frequency inverter with simple main circuit and high efficiency. The proposed inverter is proper as a high frequency inverter of home applications applied with induction heating principle of high frequency. and also, this paper proposed an computer analysis for resonant L and C.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.350-352
• /
• 1996

A Hight Efficiency Quasi-Parallel Resonant DC-Link Inverter which shows highly improved PWM capability, low loss characteristic and low voltage stress is presented. A method to minimize freewheeling interval, which is able to largely decrease DC-link operation losses and to steadily guarantee soft switching in the wide operation region is proposed. Analysis and simple experiments were performed to verify validity of the proposed inverter topology.

• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.27-36
• /
• 2001

In this paper, micromachined millimeter-wave cavity resonators ar presented. One-port and two-port cavity resonators at Ka-band are designed using 3D design software, HP $HFSS^{TM}$ ver. 5.5 Cavity resonators are fabricated on Si substrate, which is etched down for the cavity, bonded with a Quartz wafer in which metal patterns for the feeding line coupling slot are formed. One-port resonator shows the resonant frequency of 39.34 GHz, the return loss of 14.5 dB, and the loaded $Q(Q_{L})$ of 150. Two-port cavity resonator shows the resonant frequency of 39 GHz, the insertion and return losses of 4.6dB and 19,9dB, the loaded($Q_{L}$) and unloaded $Q(Q_{U})$) of 44.3 and 107, respectively.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.13-16
• /
• 2000

This paper describes a design of the external-exciting electronic ballast for 100W high pressure sodium lamp. The ballast is consists of the full-bridge inverter and an external-exciting control circuit. L and C values of an equivalent L-C series resonant circuit are calculated analytically. The electrical output characteristics of the ballast, such as voltage, current etc., are simulated by Pspice. The experimental results from high pressure sodium lamp system with the ballast we developed are shown to be consistent with the simulated results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.7-8
• /
• 2012

본 논문에서는 저전압 대전류 입력의 DC/DC컨버터에서 과도한 전류 스트레스를 부담하는 변형된 Push-Pull type 컨버터를 제안한다. 제안된 컨버터는 변압기에 병렬로 권선과 스위치를 구성하며 L-C공진을 통해 소프트스위칭을 실현한다. 이를 시뮬레이션 및 실험을 통해 검증하였다.