• Korean Journal of Radiology
• /
• v.20 no.4
• /
• pp.569-579
• /
• 2019

Objective: To investigate the usefulness of computed tomography (CT) texture analysis (CTTA) in estimating histologic tumor grade and in predicting disease-free survival (DFS) after surgical resection in patients with hepatocellular carcinoma (HCC). Materials and Methods: Eighty-one patients with a single HCC who had undergone quadriphasic liver CT followed by surgical resection were enrolled. Texture analysis of tumors on preoperative CT images was performed using commercially available software. The mean, mean of positive pixels (MPP), entropy, kurtosis, skewness, and standard deviation (SD) of the pixel distribution histogram were derived with and without filtration. The texture features were then compared between groups classified according to histologic grade. Kaplan-Meier and Cox proportional hazards analyses were performed to determine the relationship between texture features and DFS. Results: SD and MPP quantified from fine to coarse textures on arterial-phase CT images showed significant positive associations with the histologic grade of HCC (p < 0.05). Kaplan-Meier analysis identified most CT texture features across the different filters from fine to coarse texture scales as significant univariate markers of DFS. Cox proportional hazards analysis identified skewness on arterial-phase images (fine texture scale, spatial scaling factor [SSF] 2.0, p < 0.001; medium texture scale, SSF 3.0, p < 0.001), tumor size (p = 0.001), microscopic vascular invasion (p = 0.034), rim arterial enhancement (p = 0.024), and peritumoral parenchymal enhancement (p = 0.010) as independent predictors of DFS. Conclusion: CTTA was demonstrated to provide texture features significantly correlated with higher tumor grade as well as predictive markers of DFS after surgical resection of HCCs in addition to other valuable imaging and clinico-pathologic parameters.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.2
• /
• pp.1-9
• /
• 2024

New motor development requires high-speed load testing using dynamo equipment to calculate the efficiency of the motor. Abnormal noise and vibration may occur in the test equipment rotating at high speed due to misalignment of the connecting shaft or looseness of the fixation, which may lead to safety accidents. In this study, three single-axis vibration sensors for X, Y, and Z axes were attached on the surface of the test motor to measure the vibration value of vibration. Analog data collected from these sensors was used in classification models for anomaly detection. Since the classification accuracy was around only 93%, commonly used hyperparameter optimization techniques such as Grid search, Random search, and Bayesian Optimization were applied to increase accuracy. In addition, Response Surface Method based on Design of Experiment was also used for hyperparameter optimization. However, it was found that there were limits to improving accuracy with these methods. The reason is that the sampling data from an analog signal does not reflect the patterns hidden in the signal. Therefore, in order to find pattern information of the sampling data, we obtained descriptive statistics such as mean, variance, skewness, kurtosis, and percentiles of the analog data, and applied them to the classification models. Classification models using descriptive statistics showed excellent performance improvement. The developed model can be used as a monitoring system that detects abnormal conditions of the motor test.

• Journal of the Korean Society of Radiology
• /
• v.84 no.4
• /
• pp.900-910
• /
• 2023

Purpose To assess normal CT scans with quantitative CT (QCT) analysis based on smoking habits and chronic obstructive pulmonary disease (COPD). Materials and Methods From January 2013 to December 2014, 90 male patients with normal chest CT and quantification analysis results were enrolled in our study [non-COPD never-smokers (n = 38) and smokers (n = 45), COPD smokers (n = 7)]. In addition, an age-matched cohort study was performed for seven smokers with COPD. The square root of the wall area of a hypothetical bronchus of internal perimeter 10 mm (Pi10), skewness, kurtosis, mean lung attenuation (MLA), and percentage of low attenuation area (%LAA) were evaluated. Results Among patients without COPD, the Pi10 of smokers (4.176 ± 0.282) was about 0.1 mm thicker than that of never-smokers (4.070 ± 0.191, p = 0.047), and skewness and kurtosis of smokers (2.628 ± 0.484 and 6.448 ± 3.427) were lower than never-smokers (2.884 ± 0.624, p = 0.038 and 8.594 ± 4.944, p = 0.02). The Pi10 of COPD smokers (4.429 ± 0.435, n = 7) was about 0.4 mm thicker than never-smokers without COPD (3.996 ± 0.115, n = 14, p = 0.005). There were no significant differences in MLA and %LAA between groups (p > 0.05). Conclusion Even on normal CT scans, QCT showed that the airway walls of smokers are thicker than never-smokers regardless of COPD and it preceded lung parenchymal changes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.96-104
• /
• 2009

In this paper, we propose a no-reference objective Quality assessment metrics of image. The blockiness and blurring of edge areas which are sensitive to the human visual system are modeled as step functions. Blocking and blur metrics are obtained by estimating local visibility of blockiness and edge width, For the blocking metric, horizontal and vertical blocking lines are first determined by accumulating weighted differences of adjacent pixels and then the local visibility of blockiness at the intersection of blocking lines is obtained from the total difference of amplitudes of the 2-D step function which is modelled as a blocking region. The blurred input image is first re-blurred by a Gaussian blur kernel and an edge mask image is generated. In edge blocks, the local edge width is calculated from four directional projections (horizontal, vertical and two diagonal directions) using local extrema positions. In addition, the kurtosis and SSIM are used to compute the blur metric. The final no-reference objective metric is computed after those values are combined using an appropriate function. Experimental results show that the proposed objective metrics are highly correlated to the subjective data.

• Management & Information Systems Review
• /
• v.30 no.2
• /
• pp.257-275
• /
• 2011

The price relationship between the futures market and the underlying spot market has attracted the attention of academics, practitioners, and regulators due to their roles during periods of turbulence in financial markets. The purpose of this paper is to investigate the dynamic of price relationship(or lead-lag relationship) between Korean Treasury Bond futures market and spot market. To examine the nature of the price relationship, descriptive statistics, serial correlation, and cross-correlation are used as a preliminary statistics in the Korean Treasury Bond spot and futures market. Next, following Stoll-Whaley(1990) and Chan(1992), the multiple regression method is used to examine the lead-lag patterns between the two markets. The empirical results are summarized as follows. The mean returns of spot markets and future markets are positive(+) and negative(-) respectively and the standard deviation of both stock and futures returns increase through the sub-periods. For the most periods, there is negative skewness in the both markets. The zero excess kurtosis due to the heavy tails of the distribution are relatively large. The autocorrelations in the spot returns for the sample periods are positive in time lag 1, but the autocorrelations in the future returns shows no significant evidence. The results of the daily cross-correlations between the KTB spot and futures returns indicate that a lead-lag relationship don't exist for price changes of futures and spot markets as a preliminary analysis. Finally, empirical results of regression analysis for both market indicate that there is no evidence that the KTB futures lead the KTB spot market, or the KTB spot market lead the KTB futures market. These results are robust for all sub-periods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.171-177
• /
• 2016

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this study, reliability software cost model considering shape parameter based on life distribution from the process of software product testing was studied. The cost comparison problem of the Lomax distribution reliability growth model that is widely used in the field of reliability presented. The software failure model was used the infinite failure non-homogeneous Poisson process model. The parameters estimation using maximum likelihood estimation was conducted. For analysis of software cost model considering shape parameter. In the process of change and large software fix this situation can scarcely avoid the occurrence of defects is reality. The conditions that meet the reliability requirements and to minimize the total cost of the optimal release time. Studies comparing emissions when analyzing the problem to help kurtosis So why Kappa efficient distribution, exponential distribution, etc. updated in terms of the case is considered as also worthwhile. In this research, software developers to identify software development cost some extent be able to help is considered.

• Journal of Wetlands Research
• /
• v.17 no.3
• /
• pp.251-263
• /
• 2015

This study suggested a novel approach of estimating the optimal probability density function (OPDF) of the annual maximum rainfall time series (AMRT) combining the L-moment ratio diagram and the geographical information system. This study also reported several interesting geographical characteristics of the AMRT in Korea. To achieve this purpose, this study determined the OPDF of the AMRT with the duration of 1-, 3-, 6-, 12-, and 24-hours using the method of L-moment ratio diagram for each of the 67 rain gages in Korea. Then, a map with the Thiessen polygons of the 67 rain gages colored differently according the different type of the OPDF, was produced to analyze the spatial trend of the OPDF. In addition, this study produced the color maps which show the fitness of a given probability density function to represent the AMRT. The study found that (1) both L-skewness and L-kurtosis of the AMRT have clear geographical trends, which means that the extreme rainfall events are highly influenced by geography; (2) the impact of the altitude on these two rainfall statistics is greater for the mountaneous region than for the non-mountaneous region. In the mountaneous region, the areas with higher altitude are more likely to experience the less-frequent and strong rainfall events than the areas with lower altitude; (3) The most representative OPDFs of Korea except for the Southern edge are Generalized Extreme Value distribution and the Generalized Logistic distribution. The AMRT of southern edge of Korea was best represented by the Generalized Pareto distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.679-686
• /
• 2020

In this thesis, an enhanced method for the feature extraction of vocal source signals and score combination using an MCE-Based weight estimation of the score of multiple feature vectors are proposed for the performance improvement of speaker recognition systems. The proposed feature vector is composed of perceptual linear predictive cepstral coefficients, skewness, and kurtosis extracted with lowpass filtered glottal flow signals to eliminate the flat spectrum region, which is a meaningless information section. The proposed feature was used to improve the conventional speaker recognition system utilizing the mel-frequency cepstral coefficients and the perceptual linear predictive cepstral coefficients extracted with the speech signals and Gaussian mixture models. In addition, to increase the reliability of the estimated scores, instead of estimating the weight using the probability distribution of the convectional score, the scores evaluated by the conventional vocal tract, and the proposed feature are fused by the MCE-Based score combination method to find the optimal speaker. The experimental results showed that the proposed feature vectors contained valid information to recognize the speaker. In addition, when speaker recognition is performed by combining the MCE-based multiple feature parameter scores, the recognition system outperformed the conventional one, particularly in low Gaussian mixture cases.

• Korean Journal of Childcare and Education
• /
• v.11 no.4
• /
• pp.1-17
• /
• 2015

The purpose of this study is to investigate the relationship between peer interaction, self-regulation and leadership of young children, and examine the mediating effect of self-regulation ability in the effect of peer interaction on the leadership of young children. The subjects of the study were 211 children aged 4 to 5 who attended in child education institutes in the Seoul-Incheon area. A survey was conducted on teachers who worked in kindergartens and day care centers with questionnaires, and the collected data were analyzed. For data analysis, SPSS WIN 21 program was used to calculate mean, standard deviation, skewness, and kurtosis, and correlation analysis was conducted. Also, the structural equation model was validated using Amos 21, and the following results were obtained. First, the positive peer interaction, self-regulation and leadership of children were positively associated. Second, the peer interaction did not have a significant effect on the leadership of young children, and the self-regulation of young children had a positive effect on the leadership of young children. It was found that peer interaction had a positive effect on the self-regulation of young children, and in the relationship of effects on the leadership of young children, the self-regulation was found to play a role of significant mediating effect. Such results are remarkable elements in leadership education for young children, implying the importance of peer interaction and self-regulation of young children.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.101-135
• /
• 2019

The purpose of this study is to examine what influence the satisfaction of the services rendered by libraries has over the satisfaction of life, which is consisted of income employment, education, cultural leisure, family community, citizenry participation, safety environment, and subjective satisfaction. To this end, a questionnaire survey was conducted with the users of public libraries, and the extent of the measurement tools' regular distribution (skewness and kurtosis), validity and reliability were validated. First, it turned out that the satisfaction of library service has a significant influence over the satisfaction of life for income and employment. Second, the satisfaction of library service turned out to have a significant influence on the educational part of the satisfaction of life partially. Third, the overall satisfaction of library turned out to have influence over the satisfaction of culture, leisure, and health among the satisfaction of life. Fourth, it turned out that the greater the satisfaction of the library's program services and comprehensive parts, the higher the family and community satisfaction will be. Fifth, the citizenry participation increased as the library's program services and comprehensive parts increased. Sixth, as the satisfaction of library services increased, the satisfaction of safety and environment also increased. Finally, the subjective satisfaction increased as the library's space and place services and the library's overall satisfaction increased. Such research results suggest that various support for libraries could improve the quality of life and satisfaction of the people.