• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.7-14
• /
• 1988

In this paper, piezoelectric composite materials of 1-3 connectivity were prepared by using "dicing-filling" technique with PZT ceramics and epoxy polymers, and the dependence of piezoelectric properties on the thickness of specimens was investigated. In case that the PZT volume percent is 18.1%, according to an increment of thickness, the dielectric constant of composites( 33) is unchangeable, which is about 200, the piezoelectric coefficient (d33) is somewhat increased, which is about 240-280 (PC/N) and the electromechanical coupling factor of thickness mode(kt) is proportioned, but radial mode(kp) is constant.

• Journal of Ginseng Research
• /
• v.30 no.1
• /
• pp.41-48
• /
• 2006

In the browning reaction of Korean ginseng, it appears that enzymatic and non-enzymatic browning reaction occurred In initial stage of steaming fresh ginseng at low temperature, and then non-enzymatic browning reaction followed in the drying period after steaming. Browning reaction of red ginseng occurred between $60{\sim}90$ min of steaming at $100^{\circ}C$, and browning pigments of red ginseng were mostly water soluble substances. The structural characteristics of water soluble browning reaction products(WS-BRPs) isolated from Korean red ginseng were showed the presence of hydroxyl, amide carbonyl and aliphatic methane groups. From sugar analysis it was identified that L and S-1, melanoidins isolated from red ginseng, contained two kinds of sugars, glucose and xylose, and the other melanoidin S-2 contained the previous and fructose. In order to find out pertinent methods for the acceleration of browning during ginseng processing, various treatment were made on fresh ginseng with sugars, amino acids and inorganic nitrogenous compounds and the extent of browning was measured. Among sugar tested, maltose resulted in the greatest acceleration of browning followed in decreasing order by glucose and lactose, whereas pentoses, fructose, sucrose and raffinose had negligible effect. A marked browning occurred in ginseng treated with basic amino acids, while the extent of browning was not greatly increased when ginseng was treated with aliphatic amino acids, hydroxyl amino acids, or acidic amino acids. The brown color intensity gradually increased with an increase of glucose concentration far up to 0.5M. L, S-1, and S-2 were found to have an ability to donate hydrogen to DPPH, and also they had anti-oxidative activity in the experiments of hydrogen peroxide scavenging, inhibitory activity in the formation of MDA from linoleic acid, auto oxidation of ok-brain homogenates, lipid peroxidation by the enzymatic and non-enzymatic system in liver microsome fraction, and mitochondrial fraction etc. The amounts of acidic polysaccharide(AP) in red ginseng were higher than those of wild and cultured Panax quinquefolius, Panax notoginseng as well as white ginseng (Panax ginseng). In white ginseng, the AP amount is no difference in root ages or sizes, also, the AP amount of ginseng body was similar to that of rhizome, but was higher than that of leaf and epidermis. Addition of red ginseng acidic polysaccharide(RGAP) increased production of nitric oxide(NO) and tumor necrosis factor (TNF)-$\alpha$ in the rodent macrophage cultures, and treatment of RGAP in vivo stimulated tumoricidal activities of natural killer (NK) cells.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.437-444
• /
• 2024

Concomitant renal cell carcinomas (RCC) of both native and allograft kidneys are extremely rare, and only a few cases have been reported in the available English literature. A particularly rare variant within the adult population is the Xp11.2 translocation/transcription factor E3 (TFE3)-rearranged RCC. Although few case reports of TFE3-rearranged RCC have been reported in children who underwent kidney transplantation (KT), no case of adults with TFE3-rearranged RCC following KT has been reported. Herein, we presented the radiological and pathological findings of a rare metachronous papillary RCC in the allograft kidney and TFE3-rearranged RCC in the native kidney. The TFE3-rearranged RCC in the native kidney exhibited slow expansion in size over five years. Radiologically, it appeared as a slightly enhanced, lobulated mass on contrast-enhanced CT. MRI revealed high signal intensity on T1-weighted images and low signal intensity on T2-weighted images.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2483-2488
• /
• 2012

The X-ray line broadening technique was used to calculate the grain size of MgO at 1023, 1123, 1223 K respectively either in $CO_2$ or during the thermal decomposition of magnesites in air as well as in vacuum. By referring to the conventional grain growth equation, $D^n=kt$, the activation energy and pre-exponential factor for the process in air are gained as 125.8 kJ/mol and $1.56{\times}10^8\;nm^4/s$, respectively. Ranman spectroscopy was employed to study the surface structure of MgO obtained during calcination of magnesite, by which the mechanism of grain growth was analyzed and discussed. It is suggested that a kind of highly reactive MgO is produced during the thermal decomposition of magnesites, which is exactly the reason why the activation energy of the grain growth during the thermal decomposition of magnesite is lower than that of bulk diffusion or surface diffusion.

• IE interfaces
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.2
• /
• pp.32-37
• /
• 2002

This paper gives the basic mechanical properties of indium-tin-oxide (ITO) films on polymer substrates which are exposed to externally and thermally induced bending force. By using modified Storney formula including triple layer structure and bulge test measuring the conductive changes of patterned ITO islands as a function of bending curvature, the mechanical stability of ITO films on polymer substrates was intensively investigated. The numerical analyses and experimental results show thermally and externally induced mechanical stresses in the films are responsible for the difference of thermal expansion between the ITO film and the substrate, and leer substrate material and its thickness, respectively. Therefore, a gradually ramped heating process and an organic buffer layer were employed to improve the mechanical stability, and then, the effects of the buffer layer were also quantified in terms of conductivity-strain variations. As a result, it is uncovered that a buffer layer is also a critical factor determining the magnitude of mechanical stress and the layer with the Young's modulus lower than a specific value can contribute to relieving the mechanical stress of the films.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.83-93
• /
• 2006

The purpose of this study is to analyze the relationship among subjective textures, sensibilities and objective handle of knit fabrics and to provide useful information in planning and designing knit fabrics. We made 20 plain knit fabrics, as specimens, with a combination of 5 kinds of wool/rayon fiber contents and 4 kinds of stitch loop length. For the subjective evaluation, we used 29 questions of subjective textures and sensibilities and employed statistical analysis tools such as factor, Pearson's correlation analysis. An objective handle was measured by Kawabata evaluation system and HV and THV was calculated by KN-402-KT and KN-301-winter. The analysis of a Pearson's correlation with objective properties and handles and structural properties of knit fabrics demonstrated a highly linear relationship. Especially, wool/rayon contents and WT of tensile properties and loop stitch length and G of shear properties showed a correlation coefficient over 0.9. But a relationship of objective properties and subjective textures and sensibilities was non-linear and a linear multi-regression analysis showed that a objective handle had a lower prediction power in the area of subjective textures and sensibilities.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.31-36
• /
• 2015

The fatigue analysis for cutout panel used for the weight reduction of aircraft has been conventionally performed through the open hole concept using the reference stress and stress concentration factor (Kt). However, in the actual structure cases, the goal of weight reduction might be less meaningful due to the conservative approach induced by the difficulties of extracting the confident reference stress from FE-Analysis in the complicated loading behavior. Therefore a new approach is proposed in order to secure the effectiveness of weight reduction and validate the confidence of the analysis results using the interaction of max-min principal stress at the critical location of open hole edge line.

• Asia pacific journal of information systems
• /
• v.16 no.3
• /
• pp.205-227
• /
• 2006

This study suggests major characteristics of the ubiquitous environment, which include pervasive connectivity, context awareness, and playfulness, by surveying mobile contents users. Also, this empirical study attempts to validate nine hypotheses and all the ubiquitous factors of mobile contents have positive effect on perceived interactivity. It is revealed that perceived interactivity is an intermediary factor which positively affects users' perceived performance, satisfaction and continuous use intention. Hypotheses of positive relationships among users' behavioral outcome factors are also accepted. Results show that ubiquitous characteristics of mobile contents influence the users' attitude and behavior through the intermediary role of perceived interactivity among users and messages and devices. This study contributes to the literature by presenting and empirically verifying the effect of ubiquitous factors of mobile contents and perceived interactivity on uses' attitude and behavior intention. Based on study results, user-oriented theoretical bases are provided for various mobile contents service, the issue of policy-making and business planning are addressed, and managerial implications are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.93-103
• /
• 1997

Charpy V-notch impact tests were performed on the full-, half-and third-size specimens from two ferritic SA 508 Cl. 3 steels for nuclear pressure vessel. New normalization factors were proposed to predict the upper shelf energy(USE) and the ductile-brittle transition temperature(DBTT) of full-size specimens from the measured data on sub-size specimens. The factors for the USE and the DBTT are $(Bb^2/Kt); and; (Bb/R)^1/2/, $ respectively, where B the width, b the ligament size, $K_{t}$ the elastic stress concentration factor, and R the notch root radius. These correlations successfully estimated the USE and DBTT of the full-size specimens based on sub-size specimen data. In addition, the size effects were studied to develop the correlations among absorbed energy, lateral expansion(LE) and displacement. It was also found that the LE was able to be estimated from the displacement obtained by the instrumented impact test, and that the displacement would be used as a criterion for the toughness of the steels corresponding to change in their yield strength.h.