• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.255-265
• /
• 2013

This paper proposes a DEA-AR model for the efficiency evaluation of the iron ore brands in an integrated steel mill. The input factor is defined as unit cost of each brand based on CIF and two output factors are chosen as Fe and Al which are the important ingredients of iron ore. The relative importance between two output factors is determined by several experts using AHP model. The efficiency of each brand is determined using DEA and DEA-AR models. The negative correlation between the DEA-AR efficiency and the unit cost (CIF) is shown as significant whereas no significant correlation exist between the efficiency and the output factors. Also, the Kruskal Wallis rank sum test shows that there exist efficiency differences among the iron ore types whereas no difference is shown among the countries. The result could be utilized in selecting good brands of iron ores based on the DEA-AR efficiency in an integrated steel mill.

• Journal of the korean society of oceanography
• /
• v.36 no.4
• /
• pp.93-100
• /
• 2001

The concentrations of 20 congeners of PCBs were determined in surficial and dated sediments from Jinhae, Busan, Ulsan and Yeongil Bay of Korea to assess current distributions as well as historical trends. The concentration ranges of total CBs in sediments were nd-138.60 ng/g dry wt. The concentrations of total CBs were significantly different among bays in the southeastern coastal areas (Kruskal-Wallis Test, p=0.036), Showing the Order Of Busan>Ulsan>Yeongil>Jinhae Bay. Predominant PCB homologues were penta-, hexa- and hepta-CBs. The down-core distributions of PCBs showed that the highest concentrations occurred in the late 1960s, coinciding with the onset of industrialization of Korea. The compositions of PCB congeners in sediment among bays were uniform, suggesting that major sources were not changed over time.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.82-93
• /
• 1997

교통의 발달 및 빈번한 문화와 정보의 교류는 옥외 recreation 활동 참여의 다양한 인종적 구성을 가져왔다. 이 연구의 목적은 옥외 recreation 활동의 하나인 스키장에서 이용 밀도에 대한 선호도를 문화·인종간의 혼잡규범적 차이로서 해석하는데 있다. 한국의 용평 스키장과 미국 Hunter Mt. 스키장에서 한국인, 주한 미국인, 미국인, 재미 한인 들을 대상으로 이용밀도에 관한 선호도를 측정하기 위한 설문조사를 실시한 결과, 1,157부의 설문지를 회수하여, 문화·인종간의 차이를 규명하기 위하여 Kruskal-Wallis test 실시하였다. 연구의 결과로서 재미한국인의 이용밀도에 대한 선호도가 동일 인종인 한국인집단보다 사회 문화적으로 공통성이 있는 미국인집단에 더 유사하였으며 그와 반대로 재한미국인집단은 동일 인종집단인 미국 집단과 차이가 없었다. 이 결과는 혼잡 규범으로서의 이용 밀도의 선호도가 이용자의 개인적 특성 및 인종적 특성뿐만이 아니라 문화인종적 특성에 영향을 받는다는 결론을 얻었다.

• Korean Journal of Digital Imaging in Medicine
• /
• v.15 no.2
• /
• pp.55-61
• /
• 2013

The purpose of this study is to evaluate image blurring according to variation of the ETL and propose the clinically appropriate ETL range. SIEMENS MAGNETOM Skyra 3.0T and 20 channel head coil were used for the study. MRI phantom was kept the lines horizontally to three direction(X,Y,Z) of the coil and T1, T2 weighted images that used the fast spin echo technique acquired. The ETL with increase of 10 was applied from 10 to 80. In addition, the ETL with increase of 1 was applied in the interval statistically significant differences occurred. And T1, T2 weighted images that used the conventional spin echo technique acquired to compare image blurring of the images that used the fast spin echo technique. The slope of lattice in the images was measured using Image J 1.47v program to evaluate image blurring. And image blurring was determined by the degree of the slope. The statistical significance of both techniques was evaluated by the Kruskal-Wallis test of the SPSS 17.0v. And the correlation of the ETL and image blurring was evaluated quantitatively by regression analysis. The slope of the T1, T2 weighted images that used fast spin echo technique decreased as contrasted with conventional spin echo technique. In the result of the Kruskal-Wallis test, the T1, T2 weighted images that used fast spin echo technique made a significant difference with conventional spin echo technique. Particularly, in the Tomhane' T2 test, the T1, T2 weighted images made a significant difference from ETL 22 and 31 respectively. In the result of the regression analysis, the R-squared of the T1, T2 weighted images are 0.762 and 0.793. It is difficult to apply the long ETL in the T1 weighted image caused by the short TR and multi-slices study. Therefore, clinical impact according to variation of the ETL is very slight in the T1 weighted images. But the application of the proper ETL is demanded in T2 weighted images using the fast spin echo technique in order to prevent image blurring.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.337-346
• /
• 2010

The purposes of this research were to evaluate the color sensibility and preferences, and to analyze the effect of the tactile preferences and purchasing preference on structural properties, color characteristics and color sensibility for the black color fabrics. Male and female university students were asked to evaluate the color sensibility, tactile preference and purchasing preference to the nine different black fabrics which were selected on the basis of the previous research results. Data were analyzed by using frequency analysis, mean, factor analysis, t-test, Kruskal-Wallis test, correlation and regression analysis. The color sensibility for black color fabrics was classified into four factors: simplicity/classic, elegance, modernity and dignity. This color sensibility factors showed a significant correlative relationship to the structural properties and color characteristics of black color fabrics. On the other hand, fabrics which were evaluated with good tactile preference among the black color fabrics tended to show higher purchasing preference. Also, among the color sensibility, the structural properties and color characteristics of black color fabrics, major variable factor of influencing on the tactile preference and the purchasing preference was turned out to be the color sensibility.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2014

Purpose: The aim of this study was to investigate differences between the morphology of the mandibular symphysis and four facial skeletal types. Materials and Methods: 40 cone-beam computed tomographies were selected and classified in to 4 groups according to their vertical and anterior-posterior skeletal patterns. The bone volume ($mm^3$) of the symphysis, the cross sectional area corresponding to the 4 mandibular incisors' axis: the cross sectional area of total bone ($mm^2$), the area of the cancellous bone ($mm^2$) and the thickness (mm) of labial and lingual alveolar bone at 2 mm, 3 mm under the cemento-enamel junction (CEJ) were measured. General linear model (GLM), Kruskal-Wallis test and Tukey honestly significant difference (HSD) test were subsequently used for statistical analysis. Results: The lingual cortical bone thickness of the lateral incisors at 2, 3 mm under CEJ was greater in the Class I low angle group than the other 3 groups (P < 0.05). There were no statistically significant differences in the volume of the mandibular incisor bony support, cross-sectional area of total bone and cancellous bone at the mandibular incisor' axis. Conclusion: Patients in Class I, low angle group have a thicker lingual mandibular symphysis than Class I, high angle patients.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.329-339
• /
• 2022

The purpose of this study was to compare the palatal dimensions (volume, width, length, and height) in different malocclusions (Class I, II, and III) in mixed dentition using a three-dimensional digital scanner. The study was performed on 30 selected casts from 1400 casts that were taken at the Department of Pediatric Dentistry at Dankook University. Casts consisted of Class I, II, and III malocclusion groups in Hellman's dental age IIIA. The mean age was 8 years and 6 months ± 11 months. Each cast was scanned by three-dimensional digital scanner, Medit T710 (Medit, Seoul, Korea), and shaped into the three-dimensional image and calculated palatal dimensions using the Plan T program (SMD solution, Seoul, Korea). The values were statistically compared and evaluated by Kruskal-Wallis followed by the Mann-Whitney test. According to our results, subjects with Class II malocclusion showed lower palatal width and longer palatal length compared to those with Class I and Class III. For palatal height, Class III malocclusion subjects in mixed dentition exhibited a larger number than Class II and Class I. Lastly, for palatal volume, compared to other malocclusions, Class III showed higher results; however, there were no significant differences. The form of the palate differs in types of malocclusions and understanding of these differences is important in clinical significance. Based on this study, the understanding of the relationship between the shape of the palate and the skeletal pattern provides useful information about orthodontic treatment plans, early diagnosis of malocclusion, and morphological integration mechanisms. Orthopedic treatment in the maxilla should be performed during early and intermediate mixed dentition to enhance treatment efficiency.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.201-207
• /
• 2013

Purpose: In this study, the loosening torque test was conducted with three implant products that are produced, approved and sold in Korea, which are manufactured in different fixture and abutment tightening methods (internal submerged type, internal morse taper type, and external type) to examine the loosening torque of the screw according to the method of tightening the implant fixture and abutment. Methods: In the loosening torque test, the three types of fixtures and abutments with different tightening methods were tightened by rotating them clockwise with a $30N{\cdot}cm$ force using a driver equipped with an electric torque meter. The results of the test are as follows. Results: The loosening torque values of the internal submerged type, internal morse taper type and external type implants were $24.10{\pm}0.742N{\cdot}cm$, $29.10{\pm}1.710N{\cdot}cm$, and $26.60{\times}1.636N{\cdot}cm$, respectively. Conclusion: The screw loosening torque values of the three fixture and abutment tightening methods were analyzed via Kruskal Wallis test layout, and they were significantly different (p<0.05).

• Korean Journal of Community Nutrition
• /
• v.6 no.1
• /
• pp.91-96
• /
• 2001

The purpose of this study was to identify the determinants of nutrition service utilization in health centers. Utilization of nutrition services for chronic discase were also investigated. Interview survey using questionnaire was conducted to collect the data required for analysis. The study subjects were 300 residents over 40 years of age, and 15 health workers representing health center service personnel in Kypnggi province. A wilcoxon 2-sample test and Kruskal-Wallis test were used to compare the distribution of health centers by health center characteristics and nutrition services. A chi-square test was used to test the association between service utilization and personal variables of the population. A multiple logistic regression analysis was used to measure the relative importance between the variables on service utilization. The results showed that only 10.0% of the study subjects used nutrition services provided by the health centers. Pilot project implementation and location of health centers, as well as educational level of the residents were significant factors influencing the utilization of the nutrition services provided by the health centers. Among the variables, pilot project implementation was the most important factor that influenced the nutrition service utilization in health centers.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.2
• /
• pp.99-110
• /
• 2005

Characteristics of concentrations of total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) pollutant in percolated water at four paddy field sites (Soro, Odong, Munui, and Boeun) were investigated by a nonparametric test. Percolation rate measurement and percolated water sampling were taken during irrigation periods at $5{\sim}10$ day intervals. The normality of percolation rate and pollutant concentrations were examined using histogram, boxplot, and the Kolmogorov-Smirnov (K-S) test. Pollutant concentrations in percolated water showed positively skewed distribution. The median concentrations of pollutant were 1.91 mg/L for TN, 0.021 mg/L for TP, and 6.6 mg/L for COD, which were lower than its arithmetic mean concentrations by $35\%$ for TN, $36\%$ for TP, and $13\%$ for COD. The median concentrations of TN and TP differed significantly among sample sites according to the Kruskal-Wallis test. However, median concentrations were not significantly different among month except for TN and TP of Soro and COD of Odong. The percolation load of pollutants during irrigation periods in the study area were estimated at $3.12{\sim}7.75\;kg/ha$ for TN, $0.033{\sim}0.155\;kg/ha$ for TP, and 10.7 kg/ha for COD, which were much lower than respective values reported in Japan.