• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7754-7760
• /
• 2015

The outer tie rod is one of the part of steering system, the optimization process was executed to find the lightweight design. The inner tie rod was considered in the optimum design of an outer tie rod. it could be closer to the test condition than in the case of considering outer tie rod only. The aluminum forging material was considered as a weight reduction proposal. The target of optimization was the shape of the minimum weight to resist at the load of buckling. RSM and Kriging interpolation method were applied as a optimization method to consider the nonlinear shape optimization problem. Then, 16.3%, 16.6% of weight reduction was obtained from the result comparing with that of the initial model. The results of meta model optimization was compared with that of finite element method. The error values of buckling load estimation were 2.6%, 2.04%. and those of weight estimation were 0.17%, 0.13%. Therefore, it seemed that the result of Kriging model could be obtained closer to optimum value than that of RSM model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.125-130
• /
• 2011

Since conventional optimization that is classified as a deterministic method does not consider the uncertainty involved in a modeling or manufacturing process, an optimum design is often determined to be on the boundaries of the feasible region of constraints. Reliability-based design optimization is a method for obtaining a solution by minimizing the objective function while satisfying the reliability constraints. This method includes an optimization process and a reliability analysis that facilitates the quantization of the uncertainties related to design variables. Moment-based reliability analysis is a method for calculating the reliability of a system on the basis of statistical moments. In general, on the basis of these statistical moments, the Pearson system estimates seven types of distributions and determines the reliability of the system. However, it is technically difficult to practically consider the Pearson Type IV distribution. In this study, we propose an enhanced Pearson Type IV distribution based on a kriging model and validate the accuracy of the enhanced Pearson Type IV distribution by comparing it with a Monte Carlo simulation. Finally, reliability-based design optimization is performed for a system with type IV distribution by using the proposed method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.169-174
• /
• 2013

In counterfire warfare, it is important to detect and attack enemy targets faster than the enemy using sensing The grided environmental data is usually provided by the numerical simulation coupled with a data assimilation technique and various inter- or extrapolation algorithms, both of which are based on the observation spanning from simple equipments to satellites. In order to employ the gridded environmental data in the M&S system frequently cutting area and changing its resolution, interpolation algorithms such as linear, cubic spline, IDW, and Kriging methods are necessary to apply. These methods, however, require much time in the M&S system. This paper introduces a technic to reduce time to change the resolution of data. using the binary search method, which finds a point to interpolate quickly and interpolate data in the vicinity of. We also show the efficiency of proposed methods by way of measuring the respective elapsed times.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.1-10
• /
• 2005

A new approach, Multi-Objective Design Exploration (MODE), is presented to address Multidisciplinary Design Optimization (MDO) problems by CFD-CSD coupling. MODE reveals the structure of the design space from the trade-off information and visualizes it as a panorama for Decision Maker. The present form of MODE consists of Kriging Model, Adaptive Range Multi Objective Genetic Algorithms, Analysis of Variance and Self-Organizing Map. The main emphasis of this approach is visual data mining. An MDO system using high fidelity simulation codes, Navier-Stokes solver and NASTRAN, has been developed and applied to a regional-jet wing design. Because the optimization system becomes very computationally expensive, only brief exploration of the design space has been performed. However, data mining result demonstrates that design knowledge can produce a good design even from the brief design exploration.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2003.11a
• /
• pp.98-103
• /
• 2003

환경이 하나의 도시계획 요소로 작용하고 있는 상황에서 기후요소인 바람을 도시계획시 고려하여, 기존의 도시계획과는 다른 관점을 제시해 주는 분석시스템이다. 기상자료 및 해당 도면의 속성자료를 토대로 GRID분석과 Kriging보간 알고리즘을 구현하여 대상지역의 온도분포 및 바람흐름, 바람통로를 찾아내고자 하였다. 기후지도를 이용하여 주요 바람길을 파악할 수 있으며 대상지내 신선한 공기가 시작되는 녹지들을 추출하여 녹지계획의 핵으로 정한다. 녹지의 핵으로부터 각각의 녹지로 연결되는 바랑의 길을 분석하여 도시계획업무추진 시 바랑통로가 단절된 곳이나 단절된 계획이 있는 곳을 파악한다. 그리고 바람통로를 위해서 보존할 곳과 올바른 바람을 유도할 곳 등을 생성한다. 또한 본 연구에서는 열섬현상이 빈번히 발생하는 대구시를 대상지로 정하여 Landsat TM영상을 활용 도시의 열섬현상을 분석하고 시스템을 통해 제작된 기후지도를 활용한 열섬 현상 저감방안도 모색하였다.

• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.29-36
• /
• 1998

The application of a multiple rock classification method, which is a generalization of a binary rock classification, is studied in this paper. In particular, this paper shows how to incorporate qualitative data through a case study. The method suggested in this paper can be effectively used for a systematic multiple rock classification such as RMR system developed by Bieniawski. It will be very useful for rock classifications. In addition, it is known that the expected cost of errors can be atopted to indicate how well a investigation plan is made.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1121-1124
• /
• 2009

면적강우량은 수치예보모형(NWP; Numerical Weather Prediction)이나 분포형 강우유출모형 등에서 가장 중요한 입력변수이다. 기상레이더는 광범위한 시공간분해능을 지닌 강우관측기기로서 널리 이용되고 있다. 레이더 반사도 자료를 이용한 강우추정에 대한 연구는 Z-R 관계식을 이용한 방법, 지상우량계와 연계한 통계적인 방법 등 다양하게 전개되어 왔다. 일반적으로 많이 사용되는 Marshall and Palmer(1948)가 제시한 Z-R 관계식은 층운형 강우에는 비교적 타당한 결과를 얻을 수 있지만 적운형 강우에 대해서는 그러하지 못하다. 또한 지상우량계와 연계한 방법은 주로 geostatistic 기법(ordinary kriging, co-kringing, kriging with external drift 등)을 사용하지만, 배리오그램(variogram)을 작성해야 되는 등 계산절차가 복잡하고 시간이 많이 걸려 실무에 적용하여 실시간으로 강우정보를 제공하기에는 다소 무리가 따른다. 따라서 본 연구에서는 지상우량계로 관측된 강우량과 레이더 추정강우 사이의 보정계수를 이용한 실시간 Z-R 관계식으로 레이더강우를 추정할 경우 발생될 수 있는 문제점들을 제시하고 개선방안을 모색하여 보다 정확한 레이더 강우를 추정하고자 하였다. 연구 대상지역은 부산레이더 반경 240km 이내 지역이며, 강우사상으로는 2002년 8월 31일 (태풍 "루사")의 레이더 반사도 자료를 이용하였다. 또한, 지상관측 강우량자료는 AWS(Auto Weathering System) 중에서 부산레이더 관측범위 내에 존재하는 68곳의 1시간 누적강우량을 사용하였다. 연구 결과, 기존의 실시간 Z-R 관계식을 이용할 경우 단순히 지상우량계와 레이더 강우 사이의 보정계수를 사용하면서 물리적인 범위를 벗어나 과대 추정되는 결과를 발생시켰다. 본 연구에서는 이렇게 과대 추정되는 부분을 제한함으로써 보다 현실적이고 타당한 면적강우량을 산정할 수 있었다.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.447-474
• /
• 2018

The purpose of this study is to build a new dataset of spatially interpolated climate data of South Korea by performing various geo-statistical interpolation techniques for comparison with the LDAPS grid data of KMA. Among 595 observation data in 2017, 80 % of the total points and remaining 117 points were used for spatial mapping and quantification,respectively. IDW, cokriging, and kriging were performed via the ArcGIS10.3.1 software and Python3.6.4, and each result was then divided into three clusters and four watersheds for statistical verification. As a result, cokriging produced the most suitable grid climate data for instantaneous temperature. For 1-hr accumulated precipitation, IDW was most suitable for expressing local rainfall effects.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.64-75
• /
• 2008

Since the current database systems for managing geotechnical investigation results were limited by being described boring test result in point feature, it has been trouble for using other GIS data. Although there are some studies for spatial characteristics of subsurface modeling, it is rather lack of being interoperable with GIS, considering geotechnical engineering facts. This is reason for difficulty of practical uses. In this study, we has developed subsurface spatial information model through extracting needed geotechnical engineering data from geotechnical information DB. The developed geotechnical information clustering program(GEOCL) has made a cluster of boring formation(and formation ratio), classification of layer, and strength characteristics of subsurface. The interpolation of boring data has been achieved through zonal kriging method in the consideration of spatial distribution of created cluster. Finally, we make a subsurface spatial information model to integrate with digital elevation model, and visualize 3-dimensional model by subsurface spatial information viewing program(SSIVIEW). We expect to strengthen application capacity of developed model in subsurface interpretation and foundation design of construction works.

• Water Engineering Research
• /
• v.6 no.2
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.