• Korean Journal of Environmental Agriculture
• /
• v.39 no.1
• /
• pp.44-49
• /
• 2020

BACKGROUND: Benzo(a)pyrene is a highly toxic substance which has been listed as a Group I carcinogen by the International Agency for Research on Cancer. There have been numerous studies by researchers worldwide on benzo(a)pyrene. Soxhlet, ultrasound-assisted, and liquid-liquid extractions have been widely used for the analysis of benzo(a)pyrene. However these extraction methods have significant drawbacks, such as long extraction time and large amount of solvent usage. To overcome these disadvantages, we aimed to establish a rapid residual analysis of benzo(a)pyrene content in agricultural products and soil samples. METHODS AND RESULTS: A Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method was used as the pretreatment procedure. For rapid residual analysis of benzo(a)pyrene, a modified QuEChERS method were used, and the best codition was demonstrated after various performing instrument analysis. The extraction efficiency of this method was also compared with Soxhlet extraction, the current benzo(a)pyrene extracting method. Although both methods showed high recovery rates, the rapid residual analysis method markedly reduced both the measurement time and solvent usage by approximately 97% and 96%, respectively. CONCLUSION: Based on these results, we suggest the rapid residual analysis method established through this study, faster and more efficient analysis of residual benzo(a)pyrene in major agricultural products such as rice, green and red chili peppers and also soil samples.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.26-33
• /
• 2015

Batch experiments were performed to investigate the feasibility of a surfactant-enhanced soil washing process for soils heavily contaminated with crude oil in Kuwait. TPH concentration of the contaminated soil was 223,754 mg/kg, sampled from the bottom of a vaporized oil extraction pond in the Burgan reservoir field. Commercialized eight nonionic surfactants (Tween and Tergitol series) were used to measure the aqueous solubility for the crude oil. Among them, two Tergitol surfactants were used to evaluate the TPH removal efficiency of the surfactant-enhanced soil washing for heavily contaminated Kuwait soil. The solubility of the crude oil in surfactant solution was in the order Tergitol 15-S-7 > Tergitol 15-S-9 > Tergitol 15-S-12 > Tween-80 > Tween-20 > Tween-60, which showed that the crude oil solubilities of the Tergitol series were higher than those of the Tween series. The TPH removal efficiencies of 2% and 5% Tergitol 15-S-9 solution were 59% and 65%, respectively. Because the residual TPH concentration in the washed soil was still higher than the clean-up level (10,000 mg/kg), the soil washing process was repeated five times. After the fifth washing, the residual TPH concentration in the soil went down to 7,680 mg/kg and its removal efficiency was 97%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.3
• /
• pp.9-14
• /
• 2002

It is common that the soil layer is few meters below the earth surface and there are rock masses below the soil layer in the view of geological characteristics in Korea. The boundary between rock and soil is clearly divided. When dealing with the stability of rock masses, as in the case of rock slopes or dam foundations, the majority of the collapses is not within the soil layer, but within the soil-rock boundary. Therefore, it is important to identify the shear strength characteristics between soil-rock contacts. It has been common practice to assume that the strength of the soil or shale represents the minimum strength present. However, it has been suggested by Patton(1968) that such an assumption may not be valid and that lower shear strengths might be obtained along the soil-rock interface than for either material alone. Then, in this thesis, introduce rock and residual soil shear strength tests and the specimen preparation and testing procedures are described in detail and also the testing results are presented and discussed.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.98-104
• /
• 2008

This research was performed to evaluate the extraction characteristics of heavy metals for soil washing of mine tailings-contaminated soil according to particle size distribution and the chemical distributional existence of the metals. As the soil particle size was decreased, the extracted concentrations of heavy metals was increased except Fe and Mn. Most of all heavy metals were extracted within 6 h by soil washing with 0.05 M EDTA. Extraction efficiency of metals was decreased for Pb, Cu, and Zn with decreasing of particle size. Significant difference was not observed in extraction efficiency for Cd according to particle size distribution. Extraction efficiency for Cd was the highest as 86~91%, while the lowest as 5~14% for Fe. Most metals of the soil without soil washing was distributed as reducible, oxidizable, and residual fractions. Pb, Zn, and Cd existed as reducible (Fe/Mn oxide) and residual fractions and Cu existed as oxidizable and residual fractions after soil washing treatment with 0.05 M EDTA. As the soil particle size was decreased, residual fraction was increased for Pb and Cu. About 90% of reducible fraction in Pb, Zn, and Cd was removed by soil washing with 0.05 M EDTA. As the results, it was founded that soil particle size was the important parameter to effect on distributional fraction and extraction efficiency of metals in mine tailings-contaminated soil.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.03a
• /
• pp.93-100
• /
• 1998

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.39-48
• /
• 2004

The purpose of this paper was to confirm the application of the equation of the soil-water characteristic curve on an unsaturated soil. To this ends, a series of suction test was conducted on the selected 4 kinds of soil which is located in Korea, using the modified pressure extractor apparatus. And it was carried out to analyze the experimental parameters which can describe the soil-water characteristics, were determined by using the data obtained from the experiment. From the results, it was found that the matric suction was varied according to the grain size distribution, amount of fine grain particle and void ratio. Also it was found that the residual volumetric water content was decreased with the void ratio, but the index related air entry value, the soil parameter related water content and the parameter with residual water content were increased with the void ratio. And the application of equation of the soil-water characteristic curve was confirmed for the various conditions and the various state by the comparison between the volumetric water content measured by the experiment and the predicted values.

• International Journal of Railway
• /
• v.4 no.1
• /
• pp.1-4
• /
• 2011

In this study, the feasibility of using bioremediation to treat lubricant-contaminated soil around railroad turnouts was investigated. Lubricants used during the maintenance of railroad turnouts can drip onto the ground causing soil contamination. In the laboratory experiments, the residual TPH (Total Petroleum Hydrocarbons) concentration in soil gradually decreased after microorganisms degrading the lubricants were added. Generally, the soil around railroad turnouts is covered by a layer of ballasts. In the column experiments that were designed considering field sites, the removal efficiency of TPH was about 11% after 60 days of cultivation time. In the field experiments, microorganisms were added into the soil periodically, and finally the residual TPH concentrations were reduced to less than 1,700 mg/kg-soil on average. These results indicate that the lubricant in the contaminated soil around railroad turnouts could be efficiently removed through bioremediation method.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.260-269
• /
• 2021

BACKGROUND: Diquat dibromide is a fast-acting nonselective herbicide and plant growth regulator. In this study, in order to understand the possibility of unintentional pesticide contamination in the following crops, the phytotoxicity and transition of diquat dibromide residue in soil into the following crops such as pepper, radish, lettuce and corn have been assessed through phytotoxicity trial and residual evaluation in the unintentional contamination of the higher residual diquat dibromide. METHODS AND RESULTS: The pepper, radish, lettuce and corn were cultivated in the sandy soil and loam soil where the 35 mg/kg and 90 mg/kg diquat dibromide were applied, respectively. Mild growth inhibition symptoms were observed in radish, lettuce and corn crops at the 90 mg/kg- diquat dibromide treatment on the 30 day of cultivation. Diquat dibromide was analyzed using liquid chromatography QTRAP (LC-MS/MS). The recovery rates of diquat dibromide from soil and crop were determined within range from 89.1 to 116.4% with relative standard deviation less than 14.7%. Diquat dibromide residues in soil were found to be 23.90-30.22 and 69.59-82.57 mg/kg from the 35 mg/kg and 90 mg/kg of diquat dibromide-treated soil, respectively after 30 days of crop cultivation. This result implicates that diquat dibromide did not convert to metabolites and remained mostly in the soil, even though it was partially decomposed during crop cultivation. In addition, the diquat dibromide in pepper and radish that were grown for 47 days, and lettuce and corn that were cultivated for 30 days were detected to be 0.01 mg/kg or less in the sandy loam and loam soil where the 90 mg/kg diquat dibromide was applied. CONCLUSION(S): Diquat dibromide did not cause severe phytotoxicity in the following crops as well as it did not uptake and distribute to the following crops, even though it was considered to be residual in the soil.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.10a
• /
• pp.65-72
• /
• 1998

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.168-178
• /
• 1997

The optimum conditions for the residual analysis of the ethalfluralin herbicide on soils were investigated and the residues in soils were determined by gas chromatography with electron capture detector(GC-ECD). The soil samples extracted with methanol and dichloromethane and concentrated. The concentrated phase were redissolved with toluene and analyzed with GC-ECD after separated by cyanosilica gel Sep-Pak cartridge. From the standard addition experiments with 0.1 and 1.0ppm, the average recoveries were 92.8~101.2% and the detection limit was 0.004ppm. The half-life time of ethalfluralin in the soil(A) was 35 days in the laboratory and 7.2 days in the field test whereas it was 45 days and 9.7 days for each in case of soil(B).