• Journal of Korea Foresty Energy
• /
• v.22 no.3
• /
• pp.43-48
• /
• 2003

Black liquor staining for the development of natural color of bleached Hanji caused problems of discoloration and degradation. This study was carried out not only to complement these problems but also to develop natural dyeing method that was similar to the color of unbleached Hanji, through the dyeing of rice straw extractives. The dyeing properties of Hanji were influenced more by dyestuffs extraction method than extraction and dyeing time. Dyeing ability of hot water extractives was superior to cold-water extractives. Without the relation to the time of extraction and dyeing, the color of Hanji dyeing hot water extractives were similar to the control, and the color of Hanji dyed for 45 min with hot water extractives that extracted for 120 min, were almost same as the control. As natural dyestuffs, hot water extractives of rice straw showed that excellent dyeing ability for the development of various natural colors similar to unbleached Hanjis.

• The Korean Journal of Community Living Science
• /
• v.18 no.3
• /
• pp.391-398
• /
• 2007

Ginkgo leaves, which have been known as medical materials, were selected as new natural dyes in this study, in which it was examined whether they have the function of UV-blocker or not. Cotton, linen & Hanji(Korean traditional paper) were dyed with Ginkgo. Al, Cr, Cu, Fe and Sn were selected as mordants. UV-blocking rate of dyed samples was measured after dyeing and mordant treatment. The results of this study are as follows. First, most surface color of dyed samples was yellow except that Hanji mordanted with Cu was yellowish red. Second, dyeing repetition had positive correlations with K/S values of cotton ($r=.\;758^{**}$), linen ($r=.\;500^*$) and Hanji ($r=.\;819^{**}$), because K/S values were increased according to dyeing repetition. Third, solar UV-blocking rates had positive correlations with dyeing repetitions (p<0.01), because UV-blocking rates had increased according to dyeing repetition. Fourth, UV-blocking ability of Hanji was highest among samples, as UV-blocking rates of cotton and linen dyed after 3 dyeing repetition were up to 93%, Hanji's values were up to 98%. Therefore, it was proven that Ginkgo extracts used in this experiment as dyestuff have excellent dyeing ability and high UV-blocking ability. It is hoped that this work will lead to further research to confirm the physiological effects when human wear the clothes made from Hanji.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.21-27
• /
• 2001

Korean traditional paper (Hanji) making technology has adopted two kinds of sheet forming processes, which called "Oebal-choji": and "Ssangbal-choji". The sheet forming process of Oebal-choji is an original method developed in Korea. At first, paper stock is dipped onto the mold and flow away in the forward direction. Then, paper stock is scooped again and rhythmically rocked from side to side, this work is repeated several times. Through this operation the fibers intertwine and paper layers are formed. Ssangbal-choji is almost same as the Nagashizuki, which used in Japan. In this method, paper stock is scooped onto the mold and rhythmically rocked backwards and forwards several times, the water drains slowly through the bamboo screen and then sheet is formed. Tamezuki method is used in Japan and China. This is a method in which the mold is dipped into the paper stock once and left to drain. In the Ssangbal-choji and Nagashizuki methods, the most of excess solution is cast out while in the Tamezuki all of it is allowed to drain through the mold. This study was carried out to investigate the physical properties of the Hanjis that were made by Oebal-choji, Ssangbal-choji, Nagashizuki, and Tamezuki sheet forming processes. The results were follows; Physical properties of the Oebal-choji Hanji were better than those of Ssangbal-choji, Nagashizuki, and Tamezuki. Oebal-choji Hanji made little difference of paper strength between MD and CD, but Ssangbal-chjo and Nagashizuki Hanjis made wide difference. And there are no difference of paper strength between MD and CD on the Tamezuki Hanji. On the confocal laser scanning microscopy (CLSM) observation of the Hanjis, Oebal-choji made well crossed fiber orientation than those of other forming processes.r forming processes.

• Carbon letters
• /
• v.27
• /
• pp.90-97
• /
• 2018

Electromagnetic interference (EMI) shielding is an important issue in modern daily life due to the increasing prevalence of electronic devices and their compact design. This study estimated EMI-shielding effect (EMI-SE) of small ($8-14{\times}17mm$) Hanji (Korean traditional paper) doped with carbon nanotubes (CNTs) and compared to Hanji without CNT using $^2H$ (92.1 MHz) and $^{23}Na$ (158.7 MHz) nuclear magnetic resonance (NMR) peak area data obtained from 1 M NaCl in $D_2O$ samples in capillary tubes that were wrapped in the Hanji samples. The simpler method of using the variation of reflected power and tuning frequency by inserting the sample into an NMR coil was also tested at 242.9, 158.7, and 92.1 MHz. Overall, EMI shielding was relatively more effective at the higher frequencies. Our results validated that NMR methods to be useful to evaluate EMI-SE, particularly for small, flexible shielding materials, and demonstrated that EMI shielding by absorption is dominant in Hanji mixed with CNT.

• Analytical Science and Technology
• /
• v.32 no.1
• /
• pp.7-16
• /
• 2019

The objective of this study was the development of a discrimination model for the cultivational origin of paper mulberry bast fiber and Hanji using near infrared (NIR) and mid infrared (MIR) spectroscopy combined with partial least squares discriminant analysis (PLS-DA). Paper mulberry bast fiber was purchased in 10 different regions of Korea, and used to make Hanji. PLS-DA was performed using pre-treated FT-NIR and FT-MIR spectral data for paper mulberry bast fiber and Hanji. PLS-DA of paper mulberry bast fiber and Hanji samples, using FT-NIR spectral data, showed 100 % performance in cross validation and the confusion matrix (accuracy, sensitivity, and specificity). The discrimination models showed four regional groups which demonstrated clearer separation and much superior score plots in the NIR spectral data-based model than in the MIR spectral data-based model. Furthermore, the discrimination model based on the NIR spectral data of paper mulberry bast fiber had highly similar score morphology to that of the discrimination model based on the NIR spectral data of Hanji.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.414-420
• /
• 2009

We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Alnus japonica to investigate the effect of various dyeing factors (mordant, dye concentration and dyeing assistant) on colors, K/S values and light fastness of the dyed Hanji. The dyed hanji had brown color. The K/S value of dyed Hanji was increased by mordanting with alum and copper acetate. $a^*$ and $b^*$ value of dyed Hanji was decreased slightly by mordanting with alum and Iron(II) chloride. The K/S value and $b^*$ of dyed Hanji increased with increasing concentration of dye, but $L^*$ value of dyed Hanji decreased. The K/S value of dyed Hanji was also increased by fixing agent. When Hanji was mordanted with Iron(II) chloride and was not mordanted, use of fixing agent resulted in greater increase of K/S value. Use of fixing agent resulted in poor light fastness. When fixing agent was used, mordanting with copper acetate resulted in smaller color difference than mordanting with alum after aging test.

• Journal of Conservation Science
• /
• v.5 no.1 s.5
• /
• pp.3-10
• /
• 1996

In this study, bast fibers, woody parts and whole woods were pulped separately by alkali, alkali-hydrogen peroxide and sulfomethylated processes and their papermaking characteristics for the special Hanji were evaluated. Also properties of new Hanji products obtained from mixed stocks of various ratios were discussed. Solfomethylated pulps were shown higher brightness and sheet strengths than those from alkali and alkali-peroxide pulps. On the mechanical properties of Hanjis mixed with bast-and woody-parts pulps, and with bast and whole stem pulps, handsheet strengths were decreased with the increasing contents of woody and whole stem pulps. Various Hanjis could make by various mixing of separated cooked Pulps. Especially an excellant Hwaseonji(calligrapy Paper) could be made by one stage cooking of whole stem of paper mulberry by sulfomethylated pulping method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.745-752
• /
• 2005

Green tea has various medical effects. It was selected as new natural dyes guessing the effects of the biological activities are still appeared on dyeing. It was examined whether they have the function of Uv-blocker or not. Cotton, linen & Hanji were dyed with Green tea. Al, Cr, Cu, Fe and Sn were selected as the mordant and the UV blocking rate of dyed samples was measured. The results of this study as follows; 1 . The color of dyed samples with Green tea changed yellowish red except Hanji and linen mordanted with Fe. 2. K/S values of dyed samples with Green tea increased by the number of dyeing treatment(p<.01). 3. UVA and UVB blocking rate increased by the number of dyes. Cotton and Linen could block the UV radiation over $93\%$ and Hanji could block over $95\%$ after three times of dyeing. These results suggest that Hanji has possibility far various practical uses of clothing material in beautiful and functional aspect. It could have the biological effects when we put on dyed clothing material with Green tea.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.80-95
• /
• 2021

In the modern fashion industry, the application of different materials along with an emotional design is emerging as an important factor stimulating consumer sentiment. This has led to the diversity of materials and continued active research on materials. Traditional Korean paper is expressed in various ways in the field of visual arts based on Korean sentiment and unique formative characteristics. Hanji costumes have been produced in various ways over the past 20 years utilizing Hanji's physical characteristics, showing unique surface texture and various techniques that differentiate them from existing fabrics, making it symbolic in expanding the area of fashion materials. In this work, various techniques were developed by utilizing the nonwoven characteristics and excellent variability of Hanji while considering visual images, focusing on the delicate decorations and materialistic representations of wedding dresses. In addition, minimal wedding dresses with unique textures were produced to realize fantasy ideas and show surface aesthetics, confirming as a fashion material different from that of existing wedding dresses. The direction of high value-added creation for the industrialization and globalization of Hanji wedding dresses was presented, and the usefulness and scalability of Hanji materials for practical and industrialization were identified in materials that expressed visual art. To in the fashion industry, which is changing in both the wedding industry and the global market, the development of materials with high sensitivity images and original and solid identity should continue.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.481-486
• /
• 2006

There are attempts to utilize Hanji for apparel material, but, the reason that the strength and durability of Hanji decrease to a great extent in the wet condition, restricts the usability of Hanji. In order to improve the resistance against water, Hanji was treated with silicone type water repellent agents. The treatment was carried out by conventional pad-dry-cure method. The optimum treatment condition was obtained by varying the concentration of repellent agent, curing temperature and time. Water repellency was tested by spray rating method. Wet and dry tensile strength, tearing resistance and abrasion resistance were examined after the treatment. Flexural stiffness and wrinkle recovery angles of hanji were also measured. In result, the optimum condition of treatment was at resin concentration of 40g/l, catalyst concentration of 20g/l(half of resin concentration), curing temperature of 160$^{circ}C$, curing time of 120 sec. Flexural stiffness of Hanji was hardly increased and wrinkle recovery angle of Hanji was improved a little by resin treatment. After the treatment, in dry condition, tensile strength and tearing resistance were little changed but abrasion resistance was improved. In wet condition, tensile strength, tearing strength and abrasion resistance were improved.