• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2013

The Clay Statues of Donggwanwangmyo Shrine (Treasure No. 142) are highly damaged physical weathering which are crack, exfoliation. Pigment of surface are discolored by chemical weathering like dust. The result of ultrasonic velocity measurement, low velocity zone was measured the lowest part of Woojanggun Statue. Deficiency condition of pigment layer was evaluated quantitatively through infrared Thermography. As a result, exfoliation part was detected at high temperature. Making techniques of the Clay statues were identified by gamma rays, infrared TV, SEM. All Clay Statues were founded on wood base and joints of wood were fixed using thin iron wires. After wood base was twisted a straw rope, it was made by clay. Clay was blended with rice straw to prevention of crack and exfoliation. The upper side of clay layer was coated with Hanji(Korean handmade paper) and cotton in order to isolate the pigment layer.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.567-571
• /
• 2012

The discoloration of traditional paintings could be induced by various chemical reactions of inorganic pigments due to temperature, humidity, light and air pollution. In this study, we made artificial samples including azurite and malachite as inorganic pigments using the traditional method on hanji called 'Korean paper'and investigated the artificial aging process occurred by the interaction between pigments and environmental factors. It was found that the azurite was influenced by the humidity of weathering tests and the salt fog of salt spray tests according to XRD and TGA results. However, it was shown that the malachite was chemically changed by the ultraviolet radiation of weathering tests and UV radiation tests according to color difference and TGA results.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.46-59
• /
• 2015

This study was conducted focusing on the stability on materials of cultural property when the fumigant containing ethylene oxide was applied among some kinds of fumigant. Four kinds of specimens from paper, textile, metal and pigment were prepared to compare color difference, weight, surface condition before and after treatment and FT-IR analysis was carried out on specimens of paper and textile. In the case of fumigation treatment, it was conducted by two groups : one is made up of specimens with the non-fumigation as control groups, the other is made up of specimens treated with ethylene oxide + $HFC_{134a}$ and ethylene oxide + $CO_2$ as experimental groups. The result of color difference showed that there were color differences on the specimens of Hanji(Korean traditional paper), silver, cotton, ramie and yellow pigment. Especially, it was found out there was color change more than 6.0 on average from the silver specimen. However, in the silver specimen's case, color change in the non-fumigated specimen was relatively higher than those of fumigant-treated specimens, therefore, it is judged that fumigant doesn't have a decisive effect on color change in specimens, but required caution while fumigating. The result of weight measurement, there were totally 0~2% weight changes and the slightest change was found in the metal specimen, the biggest change in the papers. The result of microscopic observation on the surface of specimens showed color changes and especially, the biggest change on the silver specimen was observed. But no change in components was identified from FT-IR analysis of papers and textiles.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.289-301
• /
• 2021

When investigating old, printed documents, determining whether a work is printed on a woodblock or using a movable metal type is crucial. It is because the history of printing in Korea and across the world relies on determining the relevant printing invention used and the time of use of the movable metal type. Deciphering details from woodblock and metal prints requires various kinds of information regarding the imprint and the work's printing background, such as information on the characters in the printed document, the outline of the pages, the type of ink used, the production period of the ink, and the production period of the Korean paper. Analyzing such information can generally reveal the production period and the methods used on the old document. However, as such information is not documented systematically, relying on the researcher's judgment based on their experience and perception becomes inevitable. This study conducted an experimental investigation of the printing characteristics of woodblock prints using a replicated woodblock of the Wanpanbon edition of the Shimcheongjeon. Subsequently, the various phenomena and characteristics appearing on the woodblock prints were documented for future reference to determine the printing method of old documents. Finally, woodblock novels without an imprint may be used as a reference to estimate the printing dates by determining the degree of wear on the woodblock.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.525-535
• /
• 2021

This study identified material properties through scientific analysis on Jikgeumdan(satin with gold threads) from Donggungbi-Wonsam and the gold threads used in the embroidery. The Donggungbi-Wonsam's base of gold threads were estimated to have used mulberry fiber's Korean paper(Hanji) because non-wood-based fibers were observed. The X-ray spectrometer showed that the Tongsuseulan of Donggungbi-Wonsam was a flat gold thread of pure gold and Jikgeumdan of flat silver thread of its Saekdong and Hansam. High sulfur levels were detected in the flat silver thread, which appeared to have formed silver sulfide by either manufacturing process using sulfur or conservation environment. he dragon insignia's embroidery is also described as two types twisted gold threads; pure gold and alloying-gold and silver. while dragon insignia's border line is decorated with a twisted gold thread of pure gold. In particular, it was investigated that adhesives such as an animal glue, a protein-based compound by gas chromatography mass spectrometry. Additionally, XRF and Raman spectroscopy analysis on the mixture substances between the metal surface and the base paper of gold threads identified talc and quartz in the gold threads and Seokganju(hematite) in the flat silver threads.

• Conservation Science in Museum
• /
• v.13
• /
• pp.13-22
• /
• 2012

The patterns for Jeogui and Pyeseul (patterns of the queen's ceremonial robe worn and a belt ornament covering knees in the front) as owned by National Museum of Korea were made in the early 20th century and both of them were colored on paper. Through a non-destructive analysis on pigments and dyes used on both the patterns, it was attempted to identify the coloring materials. As for the analysis of the coloring pigments, the XRF was used. As a result of the pigment analysis on the pattern for Jeogui, it is presumed that lead white was used for obtaining the white color, ink stick for black color, orpiment for yellow color, cinnabar and red lead for red color, copper and arsenical or a mixture of copper carbonate and orpiment for green color whereas brass seems to have been used for obtaining other colors. The pigments used for obtaining the colors of white, black, yellow and green on the pattern for Pyeseul are the same as those used on the pattern for Jeogui whereas the red pigments used on each of the two patterns are seen to be different. Although it may be difficult to identify the kinds of blue pigments that were used on the patterns for Jeogui and Pyeseul, a mixture containing lead white is presumed to be used as blue pigment. Also, as a result of the UV-Vis spectroscopic analysis performed on the blue hanji (traditional Korean paper) of the pattern for Jeogui, it was presumed to have been dyed with indigo.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.4
• /
• pp.345-352
• /
• 2006

The cemented and paraffin wastes form which are incorporated the concentrated wastes, the cemented waste form which is incorporated the spent ion-exchange resins, and the miscellaneous waste(decontamination paper) were irradiated up to $10^{+8}$ rads at $5.43{\times}10^{+5}$ rads/hr with Co-60(72,023.9 Ci) as an external irradiation source. As a result, the radiolysis gases such as $H_2,\;CH_4,\;N_2,\;C_2H_6,\;O_2,\;CO\;and\;CO_2$, were measured in all the wastes. The major gas which was generated in all the wastes was hydrogen($H_2$). The volume of the generated gases showed a difference from $0.029{\sim}0.788\;cm^3.atm/1.1g$ according to the type of wastes, and more was generated in the cemented waste form incorporated a spent ion-exchange resin than in the other wastes. More hydrogen($H_2$) gas was generated in the decontamination paper waste than in the other wastes, and the G($H_2$) value was 0.12.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.290-298
• /
• 2023

Several members of the genus Broussonetia are woody plants with high-quality cellulose fibers and are used to make a traditional type of Korean paper known as Hanji. Three of these species, Broussonetia kazinoki, Broussonetia monoica, and Broussonetia papyrifera, are found in the Korean Peninsula. Because it is challenging to distinguish different Broussonetia species based on morphology alone, we have developed a set of insertion/deletion (InDel) markers for genetic identification of these species. From twenty-two Broussonetia samples collected throughout Korea, we selected six for next-generation sequencing analysis. InDel marker candidates were identified by comparing this sequence information with the B. kazinoki chloroplast genome sequence. The marker candidates were used to screen the genomes of the twenty-two Broussonetia plants, and five useful chloroplast-based InDel markers were identified. Detailed genotyping using these five markers showed that the twenty-two plants of the genus Broussonetia could be clustered into five groups, verifying that the markers developed here can be used for breeding, identification, and analysis of species in the genus Broussonetia.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.307-315
• /
• 2014

The gold textile is Korean traditional weaving technique using the gold thread since 5th century. The making technique of gold thread was written in various references, but it is severed because the gold thread weaving equipment and sumptuous moods were forbidden in the early 18th century. There are some studies of traditional gold thread which are mainly about conservation treatment of cleaning and strength. To restore traditional gold thread, investigation of material and manufacturing technique is vitally required. The gold threads are composed of gold leaf, adhesive and base sheet. Gold leaf and base sheet are available for investigation because they are exposed to the surface, whereas adhesive is not easy to investigate because it is not exposed to the surface. In this study, samples are made of pure and impure gold, animal glue and lacquer, and various types of Hanji based on domestic and foreign references to compare materials for gold threads. As a result of morphological character and stability evaluation, the optimum materials for the restoration of gold threads are pure gold, animal glue and Dochimji(smoothing paper by beating). This study is expected to be basic data for manufacturing gold threads techniques and modernization of traditional gold threads hereafter research.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.595-604
• /
• 2018

In this study, in a bid to develop natural bioadhesives for paper craft, the hanji industry, and preserving cultural assets, complex polysaccharides were extracted from brown and red algae and used as an ingredient in adhesives. Brown algae include sea trumpet, kelp, sea oak, and sea mustard, whereas red algae include Pachymeniopsis elliptica agar-agar weed, Gloiopeltis tenax, and hunori. The polysaccharides were extracted after transforming them from non-aqueous Ca complexes contained in each of the brown and red algae into water-soluble polysaccharides containing alkali metals with a solubility level of 1. and extracted Subsequently, only the polysaccharides were extracted using alcohol precipitation. The adhesion tensile strengths of kelp, a brown algae, and Pachymeniopsis elliptica, a red algae, were 21.58 and 32.99 kgf, respectively. They thus demonstrated better adhesion than that of solid glue products such as water plants (18.45 kgf) and glue sticks (20.45 kgf). The extraction yield of these polysaccharides is supposed to be determined according to their extracted environments; however, no difference in adhesion strength was seen. Further, it was found that the shapes of polysaccharides were determined by their growing environment instead of extraction environment. Use of multi-step alcohol precipitation method during extraction enabled the removal of the constituents except protein and other polysaccharides, thereby demonstrating a stable outcome without cultivation of mold. Furthermore, there was no occurrence of mold even after production of the adhesives by the simple solution method, which demonstrates the adhesive's potential as an environment-friendly adhesive material.