• 농업과학연구
• /
• 제42권3호
• /
• pp.285-291
• /
• 2015

Many Koreans have the question about the price of food: whether the price of Korean food is reasonable or not? Even though some previous studies tried to discuss and analyze the price system of Korean food, few papers clearly present the implication about production cost or marketing margin of processing food. The purpose of this paper is to measure and analyze the production cost and marketing margin of tofu and kimchi, which are one of the main food in Korea, through the raw-data of FIS, KAMIS, and other data from Korean business area. The results of studies present a few findings as follows: First, the proportion of labor cost in the production cost is very important factor and need to be decreased for the lower consumer price. Especially, the lower proportion of labor cost in kimchi industry should be important issue, even though the reduction of proportion of labor cost in kimchi industry is not easy in the real world. Second, each marketing channel of processed food shows different marketing margin. Therefore, Korean government need to increase the level of competition of marketing channels, which makes each business is forced to decrease the marketing margin to survive the market competition in Korea.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.179-184
• /
• 2002

To compare surface roughness in various porcelains and know effects of condensation, We used Ceramco dentin porcelain, Creation dentin porcelain, Creation margin porcelain, Vintage margin porcelain, Vintage dentin porcelain, and Vita dentin porcelain, and built up the powders with condensation or not, and then fired according to the instructions with porcelain furnace( Dekema, Germany ). We polished the samples step by step using the porcelain adjustment kit( Shofu Inc., Japan ), and then measured, compared and analysed Ra, Rz, and Rmax with Surftest SV-400( Mitutoyo Co., Japan ). 1. With condensation, roughness is significantly increased in Ceramco dentin porcelain (p<0.05) and decreased in Vita dentin porcelain(p<0.05). 2. In Ra, Vita dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, (p<0.05), and there is no difference under condensation. 3. In Rz, Vita dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, and Creation margin porcelain is significantly the roughest and Creation dentin porcelain is rougher than others under condensation(p<0.05). 4. In Rmax, Vintage dentin porcelain is significantly the roughest and Creation margin porcelain is rougher than others in no condensation, and Creation margin porcelain is significantly the roughest than others under condensation(p<0.05).

• 동력기계공학회지
• /
• 제14권4호
• /
• pp.43-49
• /
• 2010

In the present study, optimization of throttle margin for high pressure turbine to be retrofitted or partially modified for power uprating or life extension in nuclear power plant, has been performed to increase the electrical output. Throttle margin for high pressure turbine is required to maintain all the time the rated power by opening more of governor valves whenever inlet pressure is decreased due to the tube plugging of steam generator. If throttle margin of high pressure turbine is too much compared to remaining lifetime, loss of electrical output due to pressure drop of governor valves is inevitable. On the contrary, if it is too little, the rated power operation can not be accomplished when inlet pressure of high pressure turbine is dropped after many years operation. So, throttle margin for high pressure turbine in nuclear power plant is compromised considering for the degradation of steam generator, governor valve capacity, manufacturing tolerance of high pressure turbine, future plan of power uprating, and remaining lifetime of power plant.

• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.379-394
• /
• 2000

As an in-vessel retention (IVR) design concept in coping with a severe accident in the nuclear power plant during which time a considerable amount of core material may melt, external cooling of the reactor vessel has been suggested to protect the lower head from overheating due to relocated material from the core. The efficiency of the ex-vessel management may be estimated by the thermal margin defined as the ratio of the critical heat flux (CHF）to the actual heat flux from the reactor vessel. Principal factors affecting the thermal margin calculation are the amount of heat to be transferred downward from the molten pool, variation of heat flux with the angular position, and the amount of removable heat by external cooling In this paper a thorough literature survey is made and relevant models and correlations are critically reviewed and applied in terms of their capabilities and uncertainties in estimating the thermal margin to potential failure of the vessel on account of the CHF Results of the thermal margin calculation are statistically treated and the associated uncertainties are quantitatively evaluated to shed light on the issues requiring further attention and study in the near term. Our results indicated a higher thermal margin at the bottom than at the top of the vessel accounting for the natural convection within the hemispherical molten debris pool in the lower plenum. The information obtained from this study will serve as the backbone in identifying the maximum heat removal capability and limitations of the IVR technology called the Cerium Attack Syndrome Immunization Structures (COASISO) being developed for next generation reactors.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.79-88
• /
• 2000

The objective of this finite element method study was to analyze the stress distribution induced in a maxillary central incisor Ni-Cr base metal coping ceramic crowns with various margin design. Margin designs of crown in this experiment were knife-edge metal margin on chamfer finishing line of tooth preparation(M1), butt metal margin on shoulder finishing line(M2), reinforced butt metal margin on shoulder finishing line(M3), beveled metal margin on bevelde shoulder finishing line(M4). Two- dimensional finite element models of crown designs were subjected to a simulated biting force of 100N which was forced over porcelain near the lingual incisal edge. Base on plane stress analysis, the maxium von Miss stresses(Mpa) in porcelain venner was 0.432, in metal coping was 0.579, in dentin abutment was 0.324 for M1 model, and M2 model revealed in porcelain was 0.556, in metal coping was 0.511, in dentin was 0.339, and M3 model revealed in porcelain was 0.556, in metal coping was 0.794, in dentin was 0.383 for M4 model. All values of each material in metal-ceramic crown were much below the critical failure values.

• Nuclear Engineering and Technology
• /
• 제18권1호
• /
• pp.38-47
• /
• 1986

경수로심의 열 여유도를 분석하기 위하여 반응표면 및 Monte Carlo 방법을 이용하는 통계적 분석 방법이 제시되었다. 통계적인 열 여유도 분석 방법은 입력변수들의 불확실도를 확률론적으로 처리함으로써 열 여유도의 최적 평가를 수행한다. 이 방법은 원자력 1호기 정상상태의 원자로심 분석에 응용되었으며 또한 종래의 결정론적 방법 및 웨스팅하우스의 개선된 열설계 방법과도 비교되었다. 본 연구를 통하여 반응표면 분석 방법은 통계적인 열 여유도 분석에 유용함을 알 수 있었으며, 이 방법을 통한 열 여유도의 증가도 확인되었다.

• 대한두개안면성형외과학회지
• /
• 제15권1호
• /
• pp.36-39
• /
• 2014

Leiomyosarcoma is a rare form of soft tissue neoplasm, with only 1% to 5% occurring in the head and neck region. Current recommended treatment suggests surgical excision with a wide lateral margin, but no definite guidelines regarding excisional margin have been established yet. Recently, complete excision with a narrow surgical margin has been recommended, and the authors present a case of cutaneous leiomyosarcoma on the face that was successfully managed by complete removal with a narrow excisional margin. A 74-year-old woman presented with a 3 cm sized, rapidly growing cutaneous mass on her right preauricular area. Preoperative biopsy of the skin lesion suggested a cutaneous leiomyosarcoma. The authors performed complete surgical excision with a 1 cm lateral margin, and the resulting skin defect was repaired with bilateral V-Y advancement local flaps. Histopathology and immunohistochemistry evaluation confirmed a moderately differentiated cutaneous leiomyosarcoma, with negative margin involvement. The patient refused of any additional treatment, but showed no locoregional recurrence during the 1.5 years of postoperative follow-up period. With a regular postoperative follow-up, cutaneous leiomyosarcomas may be successfully treated with a narrow surgical margin.

• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.15-20
• /
• 2002

전신 정위 방사선 시술 시 적정 치료 조사면에 대한 연구를 실시하였다. 치료표적 직경이 1cm에서 7cm까지 1cm 간격인 경우에 다양한 크기의 치료 조사면 크기에서 만들어낸 선량 분포를 분석하였다. 치료조사면은 표적 크기에서 -1cm~2cm를 각각 더한 크기로 하였다. 치료 계획의 성적은 TCI(Target Conformity Index)로 표현하였다. 모든 표적 크기에서 -0.5cm~0.5cm를 더한 치료 조사면에서 가장 높은 TCI를 보였다. 6cm 이상의 표적 크기에서는 -0.5cm 또는 0cm를 더한 조사면에서 우수한 성적을 보였으며, 표적 크기 2cm 이하에서는 0cm 또는 0.5cm를 더한 조사면이 좋은 결과를 보였다. 표적 크기와 관계없이 동중심점 선량의 80%～90%에 처방하는 것이 가장 효율적으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제15권4호
• /
• pp.219-228
• /
• 1983

릴리프 밸브의 차단까지 TMI-2 사고의 blowdown history를 검토하고 TMI-2 사고와 같은 소규모의 냉각제 상실 사고 동안 노심 파괴를 막기 위해 더 가산해야할 측정 기구에 대하여 논의하였다. 가산된 기구를 이용하여 어떻게 노심의 uncovered level과 operator time margin을 계산하는 가를 검토하였으며, TMI-2 사고에 대해 uncovered level과 operator time margin을 결정하기 위한 샘플 계산을 수행하였다. 이 방법을 이용해서 측정되는 변수들의 함수로써 uncovered level과 operator time margin을 보여주는 도표를 작성하였다.

• Archives of Plastic Surgery
• /
• 제50권4호
• /
• pp.377-383
• /
• 2023

Background Squamous cell carcinoma (SCC) is the most common malignancy on the lower lip. Surgical excision, the standard treatment for SCC, requires full-thickness excision. However, no consensus exists about the appropriate surgical margin. Therefore, we investigated the appropriate surgical margin and excision technique by analyzing 23 years of surgical experience with lower-lip SCC. Methods We reviewed 44 patients with lower-lip SCC who underwent surgery from November 1997 to October 2020. Frozen biopsy was performed with an appropriate margin on the left and right sides of the lesion, and the margin below the lesion was the skin above the sulcus boundary. If the frozen biopsy result was positive, an additional session was performed to secure a negative margin. Full-thickness excision was performed until the final negative margin. In each patient, the total number of sessions performed, final surgical margin, and recurrence were analyzed. Results Forty-one cases ended in the first session, 2 ended in the second session, and 1 ended in the third session. The final surgical margins (left and right; n = 88) were 5 mm (66%), 7 mm (9%), 8 mm (2.3%), 10 mm (20.4%), and 15 mm (2.3%). During an average follow-up of 67.4 months (range, 12-227 months), recurrence occurred in one patient. Conclusion The final surgical margin was 5 mm in 66% (58/88) of the cases, and 97.7% (86/88) were within 10 mm. Therefore, we set the first frozen biopsy margin to 5 mm, and we suggest that a 5-mm additional excision is appropriate when frozen biopsy results are positive.