Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지

Sensitivity Studies on Thermal Margin of Reactor Vessel Lower Head During a Core Melt Accident

  • Kim, Chan-Soo (Seoul National University) ;
  • Kune Y. Suh (Seoul National University)
  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

As an in-vessel retention (IVR) design concept in coping with a severe accident in the nuclear power plant during which time a considerable amount of core material may melt, external cooling of the reactor vessel has been suggested to protect the lower head from overheating due to relocated material from the core. The efficiency of the ex-vessel management may be estimated by the thermal margin defined as the ratio of the critical heat flux (CHF）to the actual heat flux from the reactor vessel. Principal factors affecting the thermal margin calculation are the amount of heat to be transferred downward from the molten pool, variation of heat flux with the angular position, and the amount of removable heat by external cooling In this paper a thorough literature survey is made and relevant models and correlations are critically reviewed and applied in terms of their capabilities and uncertainties in estimating the thermal margin to potential failure of the vessel on account of the CHF Results of the thermal margin calculation are statistically treated and the associated uncertainties are quantitatively evaluated to shed light on the issues requiring further attention and study in the near term. Our results indicated a higher thermal margin at the bottom than at the top of the vessel accounting for the natural convection within the hemispherical molten debris pool in the lower plenum. The information obtained from this study will serve as the backbone in identifying the maximum heat removal capability and limitations of the IVR technology called the Cerium Attack Syndrome Immunization Structures (COASISO) being developed for next generation reactors.

Keywords

References

  1. I. S. Hwang et al., 'In-Vessel Retention against Water Reactor Core Melting Accidents,' Submitted for Publication in Nuclear Technology, June (2000)
  2. Z. Guo and M. S. El-Genk, 'An Experimental Study of Saturated Pool Boiling from Downward Facing and Inclined Surfaces,' Int. J. Heat Mass Transfer, 35, 9, 2109 (1992) https://doi.org/10.1016/0017-9310(92)90056-X
  3. M. S. El-Genk and A. G. Glebov, 'Transient Pool Boiling from Downward-facing Curved Surface,' Int. J. Heat Mass Transfer, 38, 12, 220 (1995) https://doi.org/10.1016/0017-9310(94)00343-T
  4. T. G. Theofanous and S. Syri, 'The Coolability Limits of a Reactor Vessel Lower Head,' Nuclear Engineering and Design, 169, 59 (1997) https://doi.org/10.1016/S0029-5493(97)00024-1
  5. S. Rouge, I. Dor and G. Geffraye, 'Reactor Vessel External Cooling for Corium Retention SULTAN Experimental Program and Modeling with CATHARE code,' Workshop on In-Vessel Core Debris Retention and Coolability, Garching, Germany, March 3-6 (1998)
  6. J. W. Park and D. W. Jeong, 'An Investigation of Thermal Margin for External Reactor Vessel Cooling (ERVC) in Large Advanced Light Water Reactor (ALWR),' Proc. of the Korean Nuclear Society Spring Meeting, Kwangju, Korea, 1, 473 (1997)
  7. U. Steinberner and H. H. Reineke, 'Turbulent Buoyancy Convection Heat Transfer with Internal Heat Sources,' Proc. of the Sixth Int. Heat Transfer Conference, Toronto, Canada, August (1978)
  8. T. G. Theofanous et al., 'In-vessel Coolability and Retention of a Core Melt,' DOE/ID-10460, vol. 1, U.S. Department of Energy, Washington, DC, USA (1995)
  9. F. Mayinger, M. Jahn, H. H. Reineke and U. Steinberner, 'Examination of Thermohydraulic Process and Heat Transfer in a Core Melt,' Final report BMFT RS 48/1, Technical University, Hannover, Germany (1975)
  10. F.B. Cheung, K. H. Haddad and Y. C. Liu, 'Critical Heat Flux Phenomenon on a Downward Facing Curved Surface,' NUREG/CR-6507 PSU/ME-97-7321 (1997)
  11. K. M. Kelkar and S. V. Patankar, 'Computational Modeling of Turbulent Natural Convection in Flows Simulating Reactor Core Melt,' Innovative Research, Inc., Final Report submitted to SNL, Albuquerque, NM, USA (1993)
  12. O. Kymalainen, H. Tuomisto, and T. G. Theofanous, 'Heat Flux Distribution from a Volumetrically Heated Pool with High Rayleigh Number,' Proc. of the Sixth Nuclear reactor Thermal Hydraulics (NURETH-6), Grenoble, France (1993)
  13. H. J. Park, V. K. Dhir and W. E. Kastenberg, 'Effect of External Cooling on the Thermal Behavior of a Boiling Water Reactor Vessel Lower Head,' Nuclear Technology, 108, 266-282 (1994)
  14. K. Y. Suh and R. E. Henry, 'Integral Analysis of Debris Material and Heat Transport in Reactor Vessel,' Nuclear Engineering and Design, 151, 203 (1994) https://doi.org/10.1016/0029-5493(94)90043-4
  15. F. J. Asfia and V. K. Dhir, 'An Experimental Study of Natural Convection in a Volumetrically Heated Spherical Pool with Rigid Wall,' Int. Mechanical Engineering Congress & the Winter Annual Meeting, Chicago, IL, USA, November 6-11 (1994)
  16. S. H. Yang, W. P. Baek and S. H. Chang, 'An Analysis of Critical Heat Flux on the External Surface of the Reactor Vessel Lower Head,' Proc. of the Korean Nuclear Society Autumn Meeting, Seoul, Korea October 29-30 (1999)