• 생물환경조절학회지
• /
• 제7권4호
• /
• pp.290-297
• /
• 1998

겨울철 온실의 기본적인 열에너지원인 일사를 최대한 확보하도록 하는 은실의 지붕형상을 결정하기 위해 유전알고리즘 및 광투과율 전산모델을 이용한 최적화기법을 이용하여 설치지역, 피복재료특성, 온실의 기본치수등이 주어졌을 때 지붕경사각, 경간폭비의 최적조합을 결정할 수 있도록 하는 최적설계를 수행하였다. 수원지방에 위치한 경간폭 6m의 2연동 동서동 온실 및 단동 온실을 가정하여 최적화를 수행한 결과 경사각, 폭비 순으로 2연동, 단동 온실에 대해 각각 40.861≒40 $_。 / , 0.4806≒0.5, 37.490≒37 $_。 / , 0.7748≒0.78의 결과를 얻을 수 있었다. 광투과율 문제를 예로 적용해 본 결과 직접 전산모델을 호출하여 최적화를 수행하는 유전알고리즘의 기법은 온실환경의 해석을 위해 연구되어온 다양한 분야의 전산모델들을 종합적인 온실의 최적설계에 활용하도록 하는데 유용한 기법이 될 것으로 판단되었다.판단되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.530-533
• /
• 2010

This paper presents numerical analysis and design optimization of various turbine blade cooling techniques with three-dimensional Reynolds-averaged Navier-Stokes(RANS) analysis. The fluid flow and heat transfer have been performed using ANSYS-CFX 11.0. A fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness with the radial basis neural network method. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. The impingement jet cooling has been performed to investigate heat transfer characteristic with geometry variables. Distance between jet nozzle exit and impingement plate, inclination of nozzle and aspect ratio of nozzle hole are considered as geometry variables. The area averaged Nusselt number is evaluated each geometry variables. A rotating rectangular channel with staggered array pin-fins has been investigated to increase heat transfer performance ad to decrease friction loss using KRG modeling. Two non-dimensional variables, the ratio of the eight diameter of the pin-fins and ratio of the spacing between the pin-fins to diameter of the pin-fins selected as design variables. A rotating rectangular channel with staggered dimples on opposite walls are formulated numerically to enhance heat transfer performance. The ratio of the dimple depth and dimple diameter are selected as geometry variables.

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

• Physical Therapy Rehabilitation Science
• /
• 제5권1호
• /
• pp.22-28
• /
• 2016

Objective: The Back Mapper is one type of Rasterstereography and it can be used in the clinic without radiation exposure. The purpose of our study was to prove the reliability and validity of the Back Mapper and to compare it with the Spinal Mouse, which is an assessment tool for spinal curvatures using a wheeled mouse, and the Cobb angle by X-ray. Design: Cross-sectional study. Methods: Twenty healthy adults participated in the test to investigate for the inter-rater reliability, intra-rater reliability, and concurrent validity. The tests were performed with assessment devices for scoliosis such as the Back Mapper, Spinal Mouse and Cobb's angle. Data was analyzed by an intraclass correlation coefficient (ICC) value and a standard error of measurement for reliability and correlation analysis for validity. Results: Intra-rater reliability of the Back Mapper was good (Cronbach's ${\alpha}$=0.821-0.984, ICC=0.696-0.969) except for assessing the lordotic angle. Inter-rater reliability was good (Cronbach's ${\alpha}$=0.870-0.958, ICC=0.770-0.919) in assessment for trunk imbalance, rotation of scapulae, thoracic angle, lumbar angle, and kyphotic angle. The kyphotic angle in the Spinal Mouse had a significant correlation icompared with the Back Mapper (r=0.510, p<0.05), and the Cobb's angle from an X-ray had a significant correlation with trunk inclination (r=0.532, p<0.05). Conclusions: These findings provide good intra-reliability of the Back Mapper in healthy subjects, but the Back Mapper requires more experienced practice to have good inter-reliability. Also, the variables of the Back Mapper does not seem as appropriate compared with the Cobb angle by X-ray.

• Physical Therapy Rehabilitation Science
• /
• 제5권1호
• /
• pp.9-14
• /
• 2016

Objective: This study was to investigate the effects of Task-oriented training for Gross Motor Function Measure (GMFM), gait and balance function in cerebral palsy. Design: Randomized controlled trials. Methods: Twenty four subjects were recruited by means of a convenience sampling from Kangseo-Gu G rehabilitation center. Subjects were 24 inpatients and were randomly divided into a task-oriented training group and a conventional group. Twelve patients were experimental group who executed the task-oriented training (5 times/wk) for 4 weeks. The task-oriented program mainly focused on the capabilities of independent walking, with the angle of inclination set at 0 degrees and walking at a self-selected comfortable speed. In addition, balance training included the one-legged standing with weight-shifting and task-oriented training. Twelve patients were control group who executed only general conventional therapy (5 times/wk) for 4 weeks. All subjects were evaluated about the motor function, gait and balance function. Subjects have conducted the measured variables, GMFM, GAITRite, PDM Multifunction Force Measuring Plate after treatment. Results: There was statistically significant increase of Gross Motor Function Measure scores of the experimental group and control group after 4 weeks (p<.05). There was statistically significant increase of gait and balance function of the experimental group after 4 weeks of task-oriented training (p<.05). The experimental group showed a significantly improvement in GMFM, gait, and balance compared to the control group (p<0.05). Conclusions: This study proved that task-oriented training after stroke can improve Gross Motor Function Measure, gait and balance. Thus this study can suggest that task-oriented training for gross motor function, gait and balance be effective on the cerebral palsy.

• 한국광학회지
• /
• 제15권6호
• /
• pp.583-590
• /
• 2004

비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다.

• 한국광학회지
• /
• 제28권6호
• /
• pp.273-280
• /
• 2017

본 논문에서는 낮은 도로 조명을 위한 freeform reflector를 설계하였다. 높이에 비해 넓은 차선까지 배광을 보내야 하는 낮은 도로 조명의 경우, 기존의 등주식 도로 조명에 비해 균제도를 맞추기 힘들다는 단점이 있다. 조명 등급 M3를 만족시키기 위해 reflector를 part 9개로 나누어 part 별 반사면의 기울기를 변화시켜 원하는 배광을 갖도록 하였고, 각 점을 기준으로 fitted curve를 그려 이에 따른 수식을 도출하였다. LightTools의 street light simulation을 통해 M3 조명 등급에 만족하는 것을 확인하였고 직접 제작하여 실제 도로상에서 조명 등급을 만족시키며 설계 결과에 대한 타당성을 입증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1168-1188
• /
• 2018

Social Network Aggregators are used to maintain and manage manifold accounts over multiple online social networks. Displaying the Activity feed for each social network on a common dashboard has been the status quo of social aggregators for long, however retrieving the desired data from various social networks is a major concern. A user inputs the query desiring the specific outcome from the social networks. Since the intention of the query is solely known by user, therefore the output of the query may not be as per user's expectation unless the system considers 'user-centric' factors. Moreover, the quality of solution depends on these user-centric factors, the user inclination and the nature of the network as well. Thus, there is a need for a system that understands the user's intent serving structured objects. Further, choosing the best execution and optimal ranking functions is also a high priority concern. The current work finds motivation from the above requirements and thus proposes the design of a query processing system to retrieve information from social network that extracts user's intent from various social networks. For further improvements in the research the machine learning techniques are incorporated such as Latent Dirichlet Algorithm (LDA) and Ranking Algorithm to improve the query results and fetch the information using data mining techniques.The proposed framework uniquely contributes a user-centric query retrieval model based on natural language and it is worth mentioning that the proposed framework is efficient when compared on temporal metrics. The proposed Query Processing System to Retrieve Information from Social Network (QPSSN) will increase the discoverability of the user, helps the businesses to collaboratively execute promotions, determine new networks and people. It is an innovative approach to investigate the new aspects of social network. The proposed model offers a significant breakthrough scoring up to precision and recall respectively.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.95-113
• /
• 2006

This study was conducted comparative analysis of juvenile brassiere and adult brassiere to identify the problems of brassieres on the market. The raw data for this study was processed by SPSS 10.1 version(statistical software) and the results of this study can be summarized as follows. 1) The result of comparative analysis of juvenile brassiere and adult brassiere pattern is that each pattern showed no difference. 2) The results of the comparative analysis of juvenile and adult brassiere pattern in wing's length and angle is that even though there are some difference between juvenile and adult in side line inclination of brassiere. there is no setting difference but size of that brassiere. 3) The result of a comparative analysis pattern and cup size measurement of juvenile brassiere and adult brassiere is that even though the adult cup girth and angle is bigger than the juvenile because adults have more protrusive and bigger volume and well developed breast, some case rather the adult's cup angle is smaller than the juvenile as brand. And as we grow up to be a woman, difference of lower breast girth and breast girth are become big while difference of upper breast girth and breast girth are become small for that reason upper cup must be lower and lower cup must be higher but there is almost no difference between adult and juvenile. 4) The result of a comparative analysis of juvenile brassiere and adult brassiere bust point of the pattern is that adult brassiere's distance between bust points 6.12cm, and juvenile's 5.6cm, there are only 0.52cm difference between two products and just 0.4cm, size grading. These results are explained that even though when grow up to be a woman the distance between two bust points become to be long and breast toward out side but brassiere size don't vary with body characteristic.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권4호
• /
• pp.327-339
• /
• 1992

This study was undertaken to investigate the effect of orthognathic surgery on occlusal force. The maximum bite force was measured in 26 dentofacial deformity patients, aged 14-26(mean age 20.3) years, before surgery and at IMF removal, 3, 6, and 12months postsurgery. To grope the correlation of bite force and skeletal change after orthognathic surgery, the cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. The presurgical maximum bite force was 13.7kg in upper first molar(rt. Side 12.7kg, it. Side 14.6kg). There was remarkable difference with that of normal occlusion. 2. The recovery of bite force was very significant in according to the operation method and the duration of IMF that was 7.6kg at IMF removal, 14.2kg at 3 months, 19.7kg at 6 months. 26.1kg at 12 months postsurgery. 3. To fasten the recovery and to increase the bite force after orthognathic surgery, the long IMF time and the injury to the masticatory muscle should be avoided by the internal rigid fixation and early physical exercise. 4. The bite force was positively correlated to the changes of mandibular plane angle, the angle between platatal plane and mandibular plan, the angle between occlusal plane and mandibular plane, and negatively correlated to the changes of mandibular body length in craniofacial structure. 5. There was no correlationship between bit force and mesial inclination of tooth long axis of first molar in this subject. 6. There was no correlation between the changes of bite force and the changes of mechanical advantage of the temporal and masseter muscle.