• 한국지반환경공학회 논문집
• /
• 제12권8호
• /
• pp.5-12
• /
• 2011

본 연구는 강우로 인한 산사태 발생 시 강우강도, 강우지속시간, 비탈면 경사, 지반조건등에 따른 파괴 원인을 분석하여 산사태를 사전에 예측하기 위해 산사태 붕괴특성을 알아보고자 인공강우장치를 이용한 실제사면 크기에 근접한 대대형모형토조와 소형모형토조로 실험을 실시하였다. 육안상의 붕괴 형태 및 간극수압, 토압, 함수비, 지중변위 등의 계측결과에 대한 비교연구를 통해 모형토조연구에 있어 크기에 따른 산사태 메커니즘 분석과 소형모형토조 실험에 대한 산사태 모형실험으로서의 검증 실험을 수행하였다.

• 한국지반환경공학회 논문집
• /
• 제22권4호
• /
• pp.5-13
• /
• 2021

철도 분야에서 구조물 접속부는 지지강성이 갑작스럽게 변화하는 구간으로 갑작스럽게 지지강성이 변화하면 강성차로 인해 구조물 접속부에는 부등침하가 발생하게 된다. 이러한 부등침하는 열차의 주행안전성과 궤도를 지지하는 노반에 문제를 발생시킨다. 특히 구조물 접속부 중 교량-토공 접속부에서 부등침하에 관하 연구는 대부분 열차하중을 고려하였을 뿐 지진을 고려한 연구는 미비한 실정이다. 이에 본 연구에서는 구조물 접속부의 형상이 지진 시 교량-토공 접속부의 동적거동에 미치는 영향을 확인하기 위해 구조물 접속부의 형상을 결정하는 어프로치블록의 기울기와 토공의 기울기를 변화시켜 수치해석을 수행하였다. 그 결과 교량-토공 접속부에서의 동적 거동은 구조물 접속부의 형상에 영향을 받는 것으로 나타났다.

• 대한물리치료과학회지
• /
• 제29권1호
• /
• pp.41-46
• /
• 2022

Background: The purpose of this study was to develop a sit-to-stand transfer assistive device, and to conduct a feasibility test. Design: A technical note. Methods and results: In this study, we developed a sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. The sit-to-stand transfer assistive device allows the user to transfer the weight from a sitting position to a standing position while shifting the weight forward by grabbing and pulling a support stand. Ten healthy adults participated in the feasibility test of the device. Each participant used the developed sit-to-stand transfer assistive device and investigated supplementation through a brief interview. As a result of the feasibility test, the opinion was that the device could assist the sit-to-stand transfer to some extent. There were opinions that it needed a function to adjust the height of the knee protective plate in the sitting position according to the user's physical characteristics. Because of the inconvenience of operating the lock device for fixing the position and adjusting inclination, there was an opinion that the improvement for a locking device is needed. There were opinions that it would be better to reduce the size of the device due to its inconvenience of portability. Conclusion: In this study, we developed the sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. In addition, it is considered that the upgrade of the device is necessary for the future since there are supplementary opinions on some points.

• 한국운동역학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2022

Objective: This study proposes a methodology to analyze important variables that have a significant impact on the putting direction prediction using a machine learning-based putting direction prediction model trained with IMU sensor data. Method: Putting data were collected using an IMU sensor measuring 12 variables from 6 adult males in their 20s at K University who had no golf experience. The data was preprocessed so that it could be applied to machine learning, and a model was built using five machine learning algorithms. Finally, by comparing the performance of the built models, the model with the highest performance was selected as the proposed model, and then 12 variables of the IMU sensor were applied one by one to analyze important variables affecting the learning performance. Results: As a result of comparing the performance of five machine learning algorithms (K-NN, Naive Bayes, Decision Tree, Random Forest, and Light GBM), the prediction accuracy of the Light GBM-based prediction model was higher than that of other algorithms. Using the Light GBM algorithm, which had excellent performance, an experiment was performed to rank the importance of variables that affect the direction prediction of the model. Conclusion: Among the five machine learning algorithms, the algorithm that best predicts the putting direction was the Light GBM algorithm. When the model predicted the putting direction, the variable that had the greatest influence was the left-right inclination (Roll).

• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.313-323
• /
• 2022

Objective: This study aimed to estimate the clinical effects of different types of bone-anchored maxillary protraction devices by using a network meta-analysis. Methods: We searched seven databases for randomized and controlled clinical trials that compared bone-anchored maxillary protraction with tooth-anchored maxillary protraction interventions or untreated groups up to May 2021. After literature selection, data extraction, and quality assessment, we calculated the mean differences, 95% confidence intervals, and surface under the cumulative ranking scores of eleven indicators. Statistical analysis was performed using R statistical software with the GeMTC package based on the Bayesian framework. Results: Six interventions and 667 patients were involved in 18 studies. In comparison with the tooth-anchored groups, the bone-anchored groups showed significantly more increases in Sella-Nasion-Subspinale (°), Subspinale-Nasion-Supramentale(°) and significantly fewer increases in mandibular plane angle and the labial proclination angle of upper incisors. In comparison with the control group, Sella-Nasion-Supramentale(°) decreased without any statistical significance in all treated groups. IMPA (angle of lower incisors and mandibular plane) decreased in groups with facemasks and increased in other groups. Conclusions: Bone-anchored maxillary protraction can promote greater maxillary forward movement and correct the Class III intermaxillary relationship better, in addition to showing less clockwise rotation of mandible and labial proclination of upper incisors. However, strengthening anchorage could not inhibit mandibular growth better and the lingual inclination of lower incisors caused by the treatment is related to the use of a facemask.

• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.334-344
• /
• 2022

Objective: This study aimed to systematically analyze the effect and stability of miniscrew-assisted rapid palatal expansion (MARPE) to provide a reference for the clinical treatment of patients with maxillary transverse deficiency (MTD). Methods: We searched PubMed, Science Direct, Web of Science, Embase, Cochrane Library, CNKI, and Wanfang Database for relevant studies published before February 18, 2021 and selected them according to the eligibility criteria. The Cochrane Handbook for Systematic Reviews (version 5.1.0) criteria were used for the quality assessment of randomized controlled trials, while the scoring protocol of the methodological index for non-randomized studies was used for non-randomized controlled trials. Statistical analysis was performed using the RevMan5.3 software. Results: All the included studies showed a relatively high success rate of expansion. The changes in both the intermolar and alveolar widths after MARPE were statistically significant. MARPE exhibited greater skeletal expansion effects than did conventional RPE. The midpalatal suture was opened in parallel after MARPE. A small amount of relapse was observed 1 year after expansion. MARPE caused tooth inclination and a decrease in alveolar height, but it was less significant than in conventional RPE. Conclusions: MARPE may be an effective treatment modality for patients with MTD. It causes great transverse skeletal expansion in late adolescence. In comparison to conventional RPE, MARPE has lower detrimental periodontal effects and has certain clinical advantages.

• 한국지반공학회논문집
• /
• 제25권5호
• /
• pp.65-73
• /
• 2009

불연속성 암반에 건설된 2-아치 터널 지표면에 외력이 작용할 경우 지중응력의 분포 특성을 파악하기 위하여 대형 모형실험과 수치해석을 수행하였다 분석결과, 불연속면이 존재하는 경우에는 선형 탄성론에 근거한 응력보다 큰 지중응력이 분포하며, 불연속면의 경사도에 따라 압력구의 형상이 달라지는 것을 확인하였다. 불연속면이 수평이거나 연직인 경우에는 지중응력의 분포가 대칭적 이지만, 경사져 있으면 경사에 대해 수직과 평행한 양방향으로 나뉘어 분포되었다. 또한 불연속면의 경사가 고각일수록 불연속면에 평행인 방향의 지중응력이 더 크게 증가하였다. 연구결과, 불연속성 암반에서는 불연속면의 경사가 음력분포에 지대한 영향을 미치며, 필러에 전달되는 응력을 추정할 경우에는 재하위치와 불연속면의 경사 및 터널 구조물간 상호위치를 고려하는 것이 중요함을 확인하였다.

• 대한치과교정학회지
• /
• 제53권2호
• /
• pp.106-115
• /
• 2023

Objective: To evaluate the null hypothesis that there is no difference in a set of clinical predictors of potentially impacted canines between low-risk patients with and without displaced canines. Methods: The normal canine position group consisted of 30 patients with 60 normally erupting canines ranked in sector I (age, 9.30 ± 0.94 years). The displaced canine group comprised 30 patients with 41 potentially impacted canines ranked in sectors II to IV (age, 9.46 ± 0.78 years). Maxillary lateral incisor crown angulation, inclination, rotation, width, height, and shape, as well as palatal depth, arch length, width, and perimeter composed a set of clinical predictors, which were evaluated on digital dental casts. Statistical analyses consisted of group comparisons and variable correlations (p < 0.05). Results: There was a significant association between sex and mesially displaced canines. Unilateral canine displacement was more prevalent than bilateral displacement. The crown of the maxillary lateral incisors was significantly angulated more mesially and rotated mesiolabially in low-risk patients with displaced canines, who also had a shallower palate and shorter anterior dental arch length. Lateral incisor crown angulation and rotation, as well as palatal depth and arch length, were significantly correlated with the canine displacement severity. Conclusions: The null hypothesis was rejected. Maxillary lateral incisor angulation inconsistent with the "ugly duckling" stage as well as a shallow palate and short arch length are clinical predictors that can significantly contribute to the early screening of ectopic canines in low-risk patients.

• 수산해양기술연구
• /
• 제59권1호
• /
• pp.1-8
• /
• 2023

In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m². Before installing the induction fishing lamp, G₀M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G₀M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.

• 대한치과교정학회지
• /
• 제53권3호
• /
• pp.185-193
• /
• 2023

Objective: The growth and development of the mandible strongly depend on modeling changes occurring at its ramus. Here, we investigated covariance patterns between the morphology of the ramus and the rest of the face. Methods: Lateral cephalograms of 159 adults (55 males and 104 females) with no history of orthodontic treatment were collected. Geometric morphometrics with sliding semi-landmarks was used. The covariance between the ramus and face was investigated using a two-block partial least squares analysis (PLS). Sexual dimorphism and allometry were also assessed. Results: Differences in the divergence of the face and anteroposterior relationship of the jaws accounted for 24.1% and 21.6% of shape variation in the sample, respectively. Shape variation was greater in the sagittal plane for males than for females (30.7% vs. 17.4%), whereas variation in the vertical plane was similar for both sexes (23.7% for males and 25.4% for females). Size-related allometric differences between the sexes accounted for the shape variation to a maximum of 6% regarding the face. Regarding the covariation between the shapes of the ramus and the rest of the face, wider and shorter rami were associated with a decreased lower anterior facial height as well as a prognathic mandible and maxilla (PLS 1, 45.5% of the covariance). Additionally, a more posteriorly inclined ramus in the lower region was correlated with a Class II pattern and flat mandibular plane. Conclusions: The width, height, and inclination of the ramus were correlated with facial shape changes in the vertical and sagittal planes.