• 동의생리병리학회지
• /
• 제19권3호
• /
• pp.811-814
• /
• 2005

This clinical study is designed to find the characteristics of heat and cold according to Sasang Constitutions by using a statistical analysis. The study was conducted based on the questionnaire sheets and medical history (clinical data) of 1080 people registered at Sasang Constitution Information Bank (SCIB). The total number of people registered at SCIB was 1083; however, 3 Taeyangin's data were excluded in this study. The statistical analyses results on these data were: Most Taeumins have warm limbs, while Soeumins have cold ones. Taeumin, and Soyangin do not like hot weather, while Soyumin doesn't like coldness. As soeumins' body temperature is relatively lower than that of other constitutions, they tend to sleep tightly under blankets or comforters. Taeumin tend to drink more water because they sweat a lot; while Soeumin drink smaller amount of water because they sweat less. Both Taeumin, and Soyangin like cold food, but Soeumin liked hot food. Soeumin showed strong tendency for hot and cold food, while other constitutions displayed less inclination toward the certain temperature of food. Soeumin certainly had the remarkable response toward changes in heat and cold than other constitutions. The differences written above were proved to be meaningful enough by Chi-square test.

• 대한치과교정학회지
• /
• 제51권6호
• /
• pp.407-418
• /
• 2021

Objective: To investigate differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and Class II malocclusions. Methods: Forty Korean adult twin pairs were divided into Class I (C-I) group (0° ≤ angle between point A, nasion, and point B [ANB]) ≤ 4°; mean age, 40.7 years) and Class II (C-II) group (ANB > 4°; mean age, 43.0 years). Each group comprised 14 monozygotic and 6 dizygotic twin pairs. Thirty-three cephalometric variables were measured using lateral cephalograms and were categorized as the anteroposterior, vertical, dental, mandible, and cranial base characteristics. The ACE model was used to calculate heritability (A > 0.7, high heritability). Thereafter, principal component analysis (PCA) was performed. Results: Twin pairs in C-I group exhibited high heritability values in the facial anteroposterior characteristics, inclination of the maxillary and mandibular incisors, mandibular body length, and cranial base angles. Twin pairs in C-II group showed high heritability values in vertical facial height, ramus height, effective mandibular length, and cranial base length. PCA extracted eight components with 88.3% in the C-I group and seven components with 91.0% cumulative explanation in the C-II group. Conclusions: Differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and II malocclusions might provide valuable information for growth prediction and treatment planning.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권6호
• /
• pp.379-384
• /
• 2020

Objectives: We sought to identify a clinically useful method of analyzing orbital dystopia to aid in diagnosis and treatment planning and to quantify vertical discrepancies in eye level and variations in canthal tilt in Koreans. Patients and Methods: In 76 Korean patients with a mean age of 23.12 years, mean differences in the level of the pupils, lateral canthi, medial canthi, and canthal tilt were measured. The difference in pupil level was calculated from the perpendicular lines drawn from the midpupil area of each eye to the midline of the face to determine the amount of skeletal discrepancy of the eye. Soft tissue discrepancies were determined according to the vertical difference between the lines drawn from the lateral or medial canthus of each eye perpendicular to the midline of the face. The canthal tilt was determined from the inclination of a line connecting the lateral and medial canthi, then classified as class I, II, or III. Results: Mean differences in pupil level, medial canthi, and lateral canthi were 1.57±1.10 mm, 1.14±1.07 mm, and 2.03±1.64 mm, respectively. The mean degree of canthal tilt were 8.45°±3.53° for the right side and 8.42°±3.81° for the left side. No study participants presented with class III canthal tilt. The mean canthal tilt values for those with class I tilt were 3.21°±1.68° for the right side and 3.18°±1.63° for the left side, while, for those who had class II tilt, the values were 9.60°±3.66° for the right side and 9.54°±2.99° for the left side. Conclusion: The presented diagnostic method of orbital dystopia can be used to effectively establish a treatment plan that takes into consideration the patient's skeletal and soft-tissue discrepancies.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.16-23
• /
• 2003

간벌이 국산 잣나무 조림목의 용재품질에 미치는 영향을 구명함으로써 잣나무 인공조림목의 양질재 생산과 효율적 이용을 위한 기초자료를 제공하고자 수행된 본 연구에서 다음과 같은 결과를 얻었다. 강도의 간벌을 실시한 곳에서는 원목의 단위 m당 표면옹이 출현수가 감소하였고, 죽은 옹이의 비율도 감소하였으나 옹이의 크기는 커졌으며, 옹이의 상향각은 죽은옹이가 산옹이보다 컸다. 굽은 원목은 간벌을 하지 않은 곳보다 강도간벌을 실시한 곳에서 적게 출현하였고, 원주형질률은 강도간벌을 실시한 곳에서 높게 나타났으며 지상고 3.2 m 이하 부위의 원목에서 더욱 향상되었다. 무결점재면률은 무간벌구에 비해 강도간벌구에서 향상되었으며, 원목품등은 간벌을 강하게 실시한 경우일수록 높게 나타났다.

• 치위생과학회지
• /
• 제23권4호
• /
• pp.245-254
• /
• 2023

Background: This study aimed to determine the skeletal and dental effects in pediatric and adolescent Korean patients with Class II Division 1 malocclusion treated using the Invisalign Mandibular Advancement (MA^®) appliance. Methods: The study included patients aged 6 to 18 years who received orthodontic treatment with the MA^® appliance for Class II Division 1 malocclusion at the Department of Pediatric Dentistry, Wonkwnag University Daejeon Dental Hospital, between July 1, 2018, and December 31, 2021. The treatment group consisted of 20 patients, 10 boys and 10 girls. The control participants were also 10 boys and 10 girls. Lateral cephalometric radiographs were taken before and after treatment, and 41 measurements of skeletal and dental changes were measured and analyzed using the V-Ceph^TM 8.0 (Osstem Implant). All analyses were performed using SPSS software (IBM SPSS for Windows, ver 26.0; IBM Corp.), and statistical significance was tested using paired and independent samples t-tests for within-group and between-group comparisons, respectively. Results: The patients in the treatment group showed significant decreases in ANB (A point, Nasion, B point), maxillary protrusion, maxillary anterior incisor labial inclination, and maxillary protrusion after treatment. However, when compared with the growth changes observed in the control group, only ANB and maxillary protrusion decreased, with no significant differences in SNA, SNB, and mandibular length. Conclusion: Collectively, the results of this study confirm that the use of MA^® appliance in pediatric and adolescent Korean patients with Class II Division 1 malocclusion results in a reduction of anteroposterior skeletal and dental disharmony.

• 대한치과교정학회지
• /
• 제30권5호
• /
• pp.565-578
• /
• 2000

한국인의 치열의 특성을 고려한 Straight-Wire Appliance(SWA)의 제작을 위한 자료를 얻기 위하여 18세 이상 25세 사이의 한국인 성인 정상교합자를 1) 구강악안면부에 기능장애가 없고, 2) 양호한 치열궁 형태와 긴밀한 구치부 교합관계를 가지며, 3) 교합이 전후방적으로 앵글 분류 I 급의 관계를 가지며, 4) 간단한 수복 치료 외에 교정치료나 보철치료를 받지 않았으며, 특히 치아의 순면과 협면의 형태에 변형을 초래한 치과 치료를 받지 않았으며, 5) 단정한 안모를 가진 자를 선발 기준으로 정하여 선발하였다. 선정된 정상 교합자의 상, 하악 인상을 채득하고, 교정용 석고 모형을 제작하였다. 얻어진 치과 석고모형을 분석하여, Andrews의 Six keys to optimal occlusion에 부합되는 표본을 5 명의 숙련된 교정의사들이 선별하여 한국인 성인 정상교합자 치열의 석고 모형 155쌍(남자 92쌍,여자 63쌍)을 얻었다. 이들을 대상으로 정밀측정장비인 Coordinate Measuring Machine(CMM, MPC802, WEGU-Messtechnik, Germany)을 이용하여 3차원 digitization을 시행하고, 계측프로그램을 작성하여 SWA 제작을 위하여 필요한 Angulation, Inclination, In-and-Out, Molar offset angle, Arch-form 등을 측정하였다. 측정을 시행하기 전에, CMM을 이용한 3차 원 digitization의 오차에 대한 검증을 실시하였고, 3차원 digitization과 컴퓨터를 이용한 형태학적 분석법과 기존의 수작업에 의한 분석법의 신뢰도에 대한 분석을 실시하였다. 이상의 연구를 통하여 얻은 결론은 다음과 같다. 1. 치과 석고모형의 3차원 digitization에 CMM을 적용하여 mesh size 0.25 mm, 0.5 mm, 1.0 mm로 등간격 디지타이징하는 것은 모두 받아들일 수 있으며, 측정의 효율성을 고려할 때 1.0 mm간격으로 등간격 디지타이징 하는 것이 바람직하다. 2. 3차원 digitization과 컴퓨터를 이용한 방법이 Andrews의 방법에 기반한 수작업 방법보다 신뢰성이 높다. 3. 3차원 digitization과 컴퓨터를 이용한 방법으로 한국인의 치열의 형태학적 특성에 맞는 SWA의 제작을 위한 자료를 채득하였다.

• 지질공학
• /
• 제32권4호
• /
• pp.611-625
• /
• 2022

지구 자기장의 고영년변화(PSV)를 이용하면 시대 미상의 고고학적 유적에 대한 연대측정이 가능하며, 이를 고고지자기 연대측정 기법이라 한다. 고고지자기 연대측정을 위해서는 비쌍극자기장을 반영하는 그 지역의 PSV 모델이 필요하다. 그동안 국내에서는 자료의 부족으로 시험적 한반도 영년변화 곡선(t-KPSV)을 사용하였으나, 이는 서남 일본의 영년변화(JPSV)로부터 수학적인 계산을 사용한 곡선이므로, 비쌍극자기장의 영향을 고려하지 못하여 신뢰성이 부족하다. 이번 연구는 그동안 한반도에서 수행된 고고지자기학적 연구 결과와 이미 발표되어 신뢰할 수 있는 연구 자료를 바탕으로 한반도 삼국 시대(원삼국 시대 포함)에 해당하는 AD 1~600년 동안의 PSV를 분석하여 곡선을 제시하였다. 제시된 PSV 곡선은 전 지구적 지자기 예측 모델과 비교 분석하였으며, 시험적 한반도 고영년변화(t-KPSV) 곡선과도 비교하였다. 선별된 고고지자기 방향 자료는 시료 수(N) ≥ 6개와 높은 신뢰도를 보이는 통계자료(𝛼₉₅ ≤ 7.8°, k ≥ 57.8)를 보였으며, 전국의 16개 지역에서 총 49개의 자료로 구성된다. 수집한 자료의 고고학적 연대는 방사성 탄소연대측정 결과와 고고학적 편년을 사용하였고, 연대 오차는 ±200년 이하의 기준으로 선별하였다. 선별된 자료들은 편각 341.7~20.1°, 복각 43.5~60.3°의 범위에 분포하며, 이동창문기법(moving window method)을 사용하여 과거 600년간 한반도 PSV 곡선인 KPSV0.6k를 제시하였다. 제시된 모델은 기존의 t-KPSV 곡선과 차이를 보이며, 전 지구적 지자기 모델(ARCH3K.1, CALS3K.4, SED3K.1)에 대비한 결과, 모델들과 방향의 변화 경향이 일치하였으며, 특히 ARCH3K.1 모델이 본 연구에서 제시한 KPSV0.6k와 가장 잘 일치하였다. 이러한 결과는 한국과 일본이 지리적으로는 근접해 있으나 비쌍극자기장 영향이 매우 다르게 나타나며, 따라서 이러한 영향이 고려된 전 지구적 모델이 한반도의 영년변화를 보다 잘 나타낼 수 있는 것으로 해석된다. 따라서 고고지자기 연대측정을 위해서 독자적 영년변화 곡선 구축이 필요하며, 보다 정교한 전 지구적 모델을 위해 보다 많은 신뢰성 높은 한반도의 고고지자기 자료 확보가 필요한 것으로 판단된다. 실제 고고학적 유적지를 대상으로 실시한 고고지자기 연대측정 결과, KPSV0.6k와 ARCH3K.1 모델에선 고고학적 편년과 일치하는 연대를 제시하였다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.7-13
• /
• 2007

A Dish type solar concentrating system consists of a parabolic concentrator and a cavity receiver. In order to achieve high temperatures from solar energy, it is essential to efficiently reflect the solar rays in the concentrator and to minimize thermal losses in the cavity receiver. Improving the economical efficiency of a solar power system required the stirling unit to be operated continuously. For continuous operation of the stilting unit, the receiver must be continuously provided with thermal energy from solar as well as additional combustion heat. It is possible for a hybrid solar receiver system equipped with an additional combustion to be operated 24 hrs/day. A hybrid solar receiver was designed and manufactured for a total thermal load of 35 kW in the operating temperature range $700^{\circ}C$ to $800^{\circ}C$. The hybrid receiver system was tested in gas-only mode by gas-fired heat to investigate thermal characteristics at inclination angle varying from 0 deg to 30 deg(cavity facing down) and the aperture to cavity diameter ratios of 0(closed cavity) and 1.0(open cavity). This paper has been conducted to measure temperature distribution in cavity surface and to analyze thermal resistances, and the evaporation and condensation heat transfer coefficient in all cases(open and closed cavity).

• 한국의류학회지
• /
• 제29권5호
• /
• pp.680-691
• /
• 2005

The purpose of this study was to investigate the change of color preference of young women living in Seoul, to provide materials which is useful for setting up the color plan for a better costume, and to suggest new information in the apparel study. This study was done on the basis of color preference only by regional characteristics and the range of this study restricted on young women' clothes. The subjects were 1,100 in 1998, 1,393 young women in 2004. They were photographed in the street. The data were analyzed by frequency, percentage and $\chi^2-test$. The results of this study was as follows; The preference of chromatic color and achromatic color, hue and tone, pattern of textiles are different mainly by regional characteristics. 1) In 1998, young women prefered achromatic colors to chromatic colors. and the most preferred achromatic color was black, especially women of YOUNGDUOPO area prefer black. But, in 2004, young women preferred chromatic colors to achromatic colors and the most preferred achromatic color was white in the all areas. 2) Analysis of hue shows that in 1998, blue is most preferred color in the all areas by young women. But, in 2004, the most preferred color was different depending on the areas 3) Analysis of tone shows that in 1998, vivid, pale, dark tones are commonly preferred by young women. However, APGUJUNG area have specially inclination, they prefer vivid, pale and light tone. In 2004 year, pale, vivid and bright tones are most preferred tones in the all areas. 4) Analysis of pattern of textiles shows that, pattern textiles were preferred by young women of APGUJUNGDONG area in 1998 and YOUNGDUOPO area in 2004. The most preferred. pattern for young women in all area was a stripe pattern.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.5-10
• /
• 2010

This study sought to compare the amounts of posterior anchorage loss during the en masse retraction of the upper anterior teeth between orthodontic mini-implant (OMI) and conventional anchorage reinforcement (CAR) such as headgear and/or transpalatal arch. The subjects were 52 adult female patients treated with sliding mechanics (MBT brackets, .022" slot, .019X.025" stainless steel wire, 3M-Unitek, Monrovia, CA, USA). They were allocated into Group 1 (N=24, Class I malocclusion (CI), upper and lower first premolar (UP1LP1) extraction, and CAR), Group 2 (N=15, Cl, UP1LP1 extraction and OMI), and Group 3 (N=13, Class II division 1 malocclusion, upper first and lower second premolar extraction, and OMI). Lateral cephalograms were taken before (T0) and after treatment (T1). A total of 11 anchorage variables were measured. Analysis of variance was used for statistical analysis. There was no significant difference in treatment duration and anchorage variables at T0 among the three groups. Groups 2 and 3 showed significantly larger retraction of the upper incisor edge (U1E-sag, 9.3mm:7.3mm, P<.05) and less posterior anchorage loss (U6M-sag, 0.7~0.9mm:2mm, P<.05; U6A-sag, 0.5mm:2mm, P<.01) than Group 1. The ratio of retraction amount of the upper incisor edge per 1 of anchorage loss in the upper molar made for the significant difference between Groups 1 and 2 (4.6mm:7.0mm, P<.05). Group 3 showed a relatively distal inclination of the upper molar (P<.05) and the intrusion of the upper incisor and first molar (U1E-ver, P<.05; U6F-ver, P<.05) compared to Groups 1 and 2. Although OMI could not shorten the treatment duration, it could provide better maximum posterior anchorage than CAR.