• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.243-246
• /
• 2003

The design of router that converts IP packets from IPv4 network to IPv6 network using embedded Linux toolkit based on processor is presented. As an address transition platform, IPv6 module is transplanted to Linux using processor and the experiment was done with IPv4 and IPv6. In order to build the test network, it is constructed with Tunneling mechanism of IPv4 and IPv6 network. The packet value is obtained about 2$\mu$sec on average a 2 hops on the ICMP ping6.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.384-393
• /
• 2015

This paper proposes an insect behavior-inspired routing algorithm for large-scale wireless mesh networks. The proposed algorithm is adapted from the behavior of an insect called Bombyx mori, a male silkmoth. Its unique behavior is its flying technique to find the source of pheromones. The algorithm consists of two steps: the shortest-path algorithm and the zigzag-path algorithm. First, the shortest-path algorithm is employed to transmit data. After half of the total hops, the zigzag-path algorithm, which is based on the movement of the male B. mori, is applied. In order to adapt the biological behavior to large-scale wireless mesh networks, we use a mesh topology for implementing the algorithm. Simulation results show that the total energy used and the decision time for routing of the proposed algorithm are improved under certain conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4451-4466
• /
• 2014

We present joint radio selection and relay scheme that delivers data from a source to a sink in heterogeneous stationary sensor networks consisting of various radio interfaces. The proposed scheme finds the optimal relay nodes and their corresponding radio interfaces that minimize energy consumption throughout the network while satisfying the end-to-end packet deadline requirement. We formulate the problem of routing through radio interface selection into binary integer programs, and obtain the optimal solution by solving with an optimization solver. We examine a trade-off relationship between energy consumption and packet delay based on network level simulations. We show that given the end-to-end deadline requirement, our routing algorithm finds the most energy-efficient routing path and radio interface across mesh hops. We demonstrate that the proposed routing scheme exploits the given packet delivery time to turn into network benefit of reducing energy consumption compared to routing based on single radio interface.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.68-72
• /
• 2002

Supercritical Carbon Dioxide was evaluated and optimized for the enrichment and fractionation of the essential oil and the bitter principles of hops, both of which contribute to the flavor of beer, Selected conditions of extraction(pressure, temperature and co-solvent) influenced the composition, the olfactory results and the colour of the extract. Optimal extraction conditions were 30 min, 1800 psia and $ >45^{\circ}C $ with co-solvent. Under these conditions, yield was 65% from brewer's yeast. The bittering substances from brewer's yeasts almost were removed.

• Natural Product Sciences
• /
• v.14 no.4
• /
• pp.269-273
• /
• 2008

Microbial transformation of isoxanthohumol (1), a prenylated flavanone from hops, has resulted in the production of a pair of glucosylated derivatives. The structures of these compounds were elucidated to be (2S)-5-methoxy-8-prenylnaringenin 7-O-${\beta}$-D-glucopyranoside (2) and (2R)-5-methoxy-8-prenylnaringenin 7-O-${\beta}$-Dglucopyranoside (3) based on the spectroscopic analyses.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.59-67
• /
• 1993

This study was conducted to clarify the translocation and the phytotoxicity of soil treated Heptachlor (0.1ppm) and Heptachlor epoxide (0.1ppm) on Hop plants and Hansam vine. Residues in the soils and the plants were analyzed and phytotoxic patterns were investigated at the different growing stages. Photosynthetic rate and chlorophyll contents were measured. The results were summarized as follows: 1. At the second growing stage, 40 days after transplanting, severe damages by Heptachlor were observed on root of Hop. Growth rate on top and root parts of Hop was retarded from the third growing stage, 70 days after transplanting. The damages seemed to be caused by Heptachlor epoxide rather than by Heptachlor. 2. Residues of Heptachlor and Heptachlor epoxide in the plants, Hops and Hansam vine, were high at the second growing stage in comparison with those at the other stages. Residual levels in the plant parts were in order of root> stem> leaf. 3. Inhibition of photosynthetic rate was more serious in Hop plants than those in Hansam vine. The photosynthetic rate was suppressed at the second growing stage by Heptachlor epoxide and greatly reduced at the third growing stage. 4. Chlorophyll contents were not significantly changed in Hops and Hansam vine. Decreasing trends of the chlorophyll contents in both plants treated with the pesticides were similar to those of control plants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1298-1306
• /
• 2014

In this paper, we use the ECMA-392 standard, the first cognitive radio networks to meet the demand for IT services in the ship. And, we investigate about the conflicts of devices that support multi-hop network based on the ECMA-392. Therefore, we propose the resolution scheme of CRP reservation conflicts to solve this. The current CRP reservation approaches does not solve the CRP reservation conflicts of ECMA-392 between devices that move at a distance of three hops. Therefore, it is not possible to guarantee the QoS of real time services such as multimedia streaming. So, we provide a new CRP reservation scheme to avoid conflict through a new 2-hop CRP Availability IE and the change of CRP Control field. From the simulation results, we know that the proposed method of 3 hops CRP reservation conflicts resolution improves the throughput of device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1296-1306
• /
• 2015

Nowadays the research of energy saving on the IP networks have been studied the various methods in many research institutes. This paper suggests the energy saving method in IP networks which have the various energy profiles, and analyzes its energy saving characteristics in detail. Especially this paper proposes the energy profile based OSPF routing method which have the selectable weighted value in OSPF metric and energy consumption in IP network. This paper analyzes the energy saving effects of the various situations to minimize the energy consumption using the various weighted value on the proposed scheme. The results show that the energy saving efficiency can get about 67% at in ingress input load ${\rho}=0.5$ by using random energy profiles in IP networks. Although the number of hops is a slight increased due to routing the paths for the minimum energy consumption in the algorithm of this method, the increment hop number is limited the mean 1.4 hops. This paper confirms that the energy profile of core router has the large effects of energy saving than the energy profile of edge router, and the proposed method has the excellent energy saving characteristics in IP networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.950-958
• /
• 2011

This paper focuses in the implementation of mesh router supporting multi-path routing based on IEEE 802.11s. In HWMP of IEEE 802.11s, the single path routing just was defined. So, in this work, we implemented not only the single path routing defined in IEEE 802.11s, but also a multipath routing based on AOMDV which extended the standard. A multi-channel multi-interface technology that can transmit and receive simultaneously and lower bandwidth reduction caused by interferences than a single-channel single-interface was implemented in our mesh router. We also developed an outdoor test bed with the mesh routers. The bandwidth of the mesh router and a real-time video streaming service were verified using the test bed. And, the single path and multipath routing algorithms are also compared. In this test bed, The average TCP bandwidth was 23.77 Mbps and the latency was 2.4 ms in five hops. The test bed could service real-time streaming with an average jitter of 0.547 ms in five hops. The mesh router that used the multipath routing path reduced the path recovery time by 12.73% on average.