Objectives : The purposes of this study were to evaluate exhaust ventilation systems(EVSs) and to suggest problems and improvements. Methods : For 50 small and medium-sized enterprises, we carried out evaluation of EVSs. We evaluated hoods with smoke tester and measurement of capture velocity. In addition, we used several indicators for performance evaluation designed in this study. Results : 1. Based on the smoke flow pattern and the criteria of occupational health and safety act, 67.8% of hoods were rated 'good' level at smoke test whereas 26.3% were rated 'good' level at measurement of capture velocity. 2. 29.3% of hoods, of which ratio of measured actual air flow at hood(Qah) to required ideal exhaust air flow at hood(Qih) was 1 or more, were rated 'good' level. 3. The % of EVS, of which ratio of measured actual air flow at stack(Qast) to total required ideal exhaust air flow at hood(Qith) was 1 or more, was 29.0%. 4. For the ratio of measured Qast to existing air flow at fan(Qfan), only 5% of EVSs were 1 or more and 26.0% were 0.8 or more but less than 1.0. 5. For the ratio of measured Qast to total measured actual exhaust air flow at hood(Qath), 74.0% were 0.8 or more but less than 1.0. 6. The percentage of EVS, of which ratio of total measured Qath to existing Qfan was 0.8 or more, was 19.0%. 7. The percentage of EVS, of which ratio of total measured Qath to total required ideal exhaust Qith was 1 or more, was 26.0%. 8. For the comprehensive evaluation indicators designed in this study, 29.0% were 0.8 or more. Conclusions : We found that few exhaust local ventilations at small and medium-sized enterprises were rated 'good' level and that most exhaust local ventilations had 'poor' design and installation. Therefore, relevant professional manpower and enterprises have to construct exhaust local ventilation where it is needed, and technical guidance and economic support are needed to improve 'poor' exhaust local ventilation after self-evaluation.
Objectives: In order to reduce the burden on employers and increase the reliability of measurement results, improvements to the provisions related to the work environment measurement reporting system, such as the current Occupational Safety and Health Act and its Enforcement Rules, are planned. This study aimed to suggest improvements for the work environment measurement reporting system through a survey and Delphi investigation. Method: This survey included workplaces (health managers), national institutions (the Ministry of Employment and Labor) that use the results of the work environment measurement reporting system for policy and supervision purposes, and work environment measurement institutions that enter the results were included. In addition to the survey, we tried to derive results through meetings with stakeholders and expert advisory meetings. Results: It is difficult to abolish or partially improve the reporting system under the Enforcement Regulations of the Occupational Safety and Health Act at this point because the opinions of workplaces, supervisory agencies, and measuring agencies differ in terms of its intended purpose and use. In the case of high-exposure harmful factors (over 50% on the basis of exposure) in the "comprehensive opinion" described in the work environment measurement results table, it is necessary to insert unit of work with exposed harmful factors, exposure factors, and current conditions in checklists or tables so that they can be reflected in government policies. In the case of workplaces that are feared to be highly exposed to substances subject to measurement, it seems desirable to improve them so that industrial health instructors registered with the Korea Safety and Health Agency or local labor offices can provide technical guidance. As an improvement plan to increase the reliability of data and the use of big data, it is necessary to improve the input method for processes and jobs. Conclusion: The laws and regulations of the work environment measurement reporting system are difficult to revise due to a lack of consensus among current stakeholders, but improvements can be achieved by improving the Ministry of Employment and Labor's notifications and other means. In addition, in order to effectively utilize the data from the K2B system, it is necessary to improve the input method for processes and jobs.
목적 : 본 연구에서는 참여(participation)를 종속변인으로 선정한 국내외의 논문들을 수집 분석하여 참여 평가에 대한 활용도를 알아보고자 하였다. 또한, 근래에 투고된 참여 논문들의 정보를 종합하여 참여 평가를 목적으로 사용한 평가도구 사용현황과 참여 증진을 위한 중재의 종류, 논문 별 목적, 대상자, 디자인 등을 분석하여 국내외의 참여연구의 현황을 확인하였다. 연구 방법 : 2004년부터 2013년 까지 최근 10년 사이의 논문을 대상으로 "Occupational Therapy<전문> AND stroke <제목> AND participation<제목>"을 주제어로 검색하였다. 국외 논문은 Pubmed를 이용하였고, 국내 논문은 국가전자 도서관, 국회도서관, 학술연구정보서비스를 통해 검색이 이루어졌다. 결과 : 선행연구의 고찰 결과, 총 12편의 논문이 사용되었으며 국외 논문은 11편, 국내 논문은 1편이 검색되었다. 참여수준 향상을 위한 중재는 2편의 논문에서 확인되었다. 가장 많이 쓰인 연구 디자인은 조사(survey)였으며 총 4개의 논문에서 설문지, 전화, 방문조사 등을 통해 이루어졌다. 평가도구는 총 21종류의 평가도구가 29회 사용되었다. 가장 빈번하게 사용된 평가도구는 Activity Card Sort(ACS)로 3회 사용되었다. 결론 : 국내외적으로 참여에 대한 연구는 매우 부족한 실정이며, 이는 변화된 현재 추세를 따라가지 못하는 처세이다. 앞으로는 뇌졸중 환자들의 보다 나은 삶을 위하여 신체적 기능 향상만이 아닌 참여 증진을 위한 연구가 보다 진행되어야 할 것이다.
본 연구의 목적은 법원경비관리대원들이 직업사회화 과정의 다양한 경험요소를 규명하여 예비 법원경비관리대원 및 경호경비 교육서비스 전략수립에 필요한 기초자료를 제시하고자 하였다. 이에 3년 이상 경력의 법원경비대원 4명을 대상으로 심층면담과 문화 기술적 연구를 실시하였다. 그 결과 법원경비관리대원의 직업사회화 과정은 준비기, 적응기, 갈등기, 성숙기로 구분하였다. 준비기에는 대학 학과의 비전, 자격증 취득, 법원경비관리대 정보가 법원경비관리대원이 되기 위한 기초 단계의 요소이다. 적응기는 실무에 유용한 대학 교육 프로그램, 실무에 필요한 자격증, 직무 만족이 법원경비관리대원이 된 후 자신의 역할을 충실히 하기 위해 적응하며 전문 인력으로 자리매김을 하는 시기이다. 갈등기는 법원경비관리대원으로 겪게 되는 직장 내 갈등과 업무 스트레스를 인지하고 극복해 나가는 시기이다. 성숙기는 동기부여, 업무의 전문성, 직업의 장래성, 자기발전 노력을 통해 법원경비관리대원으로 한 단계 더 성장해 나가고 있는 단계를 의미한다.
The purposes of this study were to review current status and problems of national qualification sys tem in the field of industrial hygiene, focusing on the deficiencies in the regulatory system and the quality of individual professionals including the Industrial Hygiene Management Professional Engineer and the Industrial Hygiene Management Engineer, and to suggest new directions for the industrial hygiene qualification system. In addition, comparable systems adopted in other countires were reviewed.
Objectives: Safety is a primary health promotion issue in worksite because injury induces multi-fold loss of the human and economic resources to profit organization. The purposes of this study were to describe worksite health and safety education and management status in Korean manufacturing companies. Methods: The original population size of Korean manufacturing industry in 2004 was 74,398 and 2,960 factories were selected by the multiple stratified sampling method for this study. The health and safety manager or representatives of the selected 2,960 companies successfully finished in the face-to-face interview survey about company's general characteristics, health and safety management style, health and safety education hours conducted by the Korean Occupational Safety and Health Agency. Results: The manufacturing companies in Seoul and Kyunggi areas, small size, and clothes and press industries were related to low health and safety management and education status. The companies which assigned at least one safety manager were 70.5% and which had a health and safety room within the company were only 9.3%. The companies which took the health and safety education for their regular blue-collar employees more than the legal education hours were under 56.1% and the percentage of the companies which took their health and safety education for newcomers less than the legal limits was lower than any other types of health and safety education in workplace. The significant strong workplace health and safety management variables in predicting employee health and safety education were psycho-social variables such as the company own health and safety regulation and the workplace health and safety management committee organization. rather than physical variables such as health manager employment, safety manager employment. Conclusions: Systematic and legal approaches are effective to encourage workplace health and safety education, specifically, through sustaining health and safety managers and building the company-wide health and safety management system. Furthermore, theses approaches should primarily focus on the small companies of which sizes were under 50.
The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.
Objectives: The purposes of this study are to investigate workers' exposures to respirable particles generated in taconite mines and to compare two metric methods for mass concentrations using direct-reading instruments. Methods: Air monitorings were conducted at six mines where subjects have been exposed primarily to particulate matters in crushing, concentrating, and pelletizing processes. Air samples were collected during 4 hours of the entire work shift for similarly exposure groups(SEGs) of nine jobs(N=37). Following instruments were employed to evaluate the workplace: a nanoparticle aerosol monitor(particle size range; 10-1000 nm, unit: ${\mu}m^2/cc$, Model 9000, TSI Inc.); DustTrak air monitors($PM_{10}$, $PM_{2.5}$, unit: $mg/m^3$, Model 8520, TSI Inc.); a condensation particle counter(size range; 20-1000 nm, unit: #/cc, P-Trak 8525, TSI Inc.); and an optical particle counter(particle number by size range $0.3-25{\mu}m$, unit: #/cc, Aerotrak 9306, TSI Inc.). Results: The highest airborne concentration among SEGs was for furnace operator followed by pelletizing maintenance workers in number of particle and surface area, but not in mass concentrations. The geometric means of $PM_{2.5}$ by the DustTrak and the Ptrak/Aerotrak were $0.04{\mu}m$(GSD 2.52) and $0.07{\mu}m$(GSD 2.60), respectively. Also, the geometric means of RPM by the DustTrak and the Ptrak/Aerotrak were $0.16{\mu}m$(GSD 2.24) and $0.32{\mu}m$(GSD 3.24), respectively. The Pearson correlation coefficient for DustTrak $PM_{2.5}$ and Ptrak/Aerotrak $PM_{2.5}$ was 0.56, and that of DustTrak RPM and Ptrak/Aerotrak RPM was 0.65, indicating a moderate positive association between the two sampling methods. Surface area and number concentration were highly correlated($R^2$ = 0.80), while $PM_{2.5}$ and RPM were also statistically correlated each other($R^2$ = 0.79). Conclusions: The results suggest that it is possible to measure airborne particulates by mass concentrations or particle number concentrations using real-time instruments instead of using the DustTrak Aerosol monitor that monitor mass concentrations only.
Didecyldimethylammonium chloride (DDAC) is used for various purposes, such as a fungicide for coolants, an antiseptic for wood, and disinfectant for cleaning. Despite the increasing likelihood of DDAC inhalation, available data on its toxicity from inhalation are scarce. Therefore, this study was aimed at confirming the toxicity of DDAC after inhalation exposure for 2 wk. Male Sprague-Dawley rats were exposed to approximately $0.15mg/m^3$, $0.6mg/m^3$, and $3.6mg/m^3$ DDAC aerosols in whole-body exposure chambers. After DDAC exposure for 2 wk, effects of DDAC on body weight, blood, bronchoalveolar lavage (BAL), and the lungs were verified. The mass median aerodynamic diameter of DDAC aerosols was $1.86{\mu}m$ and the geometric standard deviation was 2.75. The concentrations of DDAC aerosols for the low, medium, and high groups were $0.15{\pm}0.15mg/m^3$, $0.58{\pm}0.40mg/m^3$, and $3.63{\pm}1.56mg/m^3$, respectively. Body weight gain was significantly influenced by DDAC exposure. In the high group, a body weight decrease of 2.6 g was observed, whereas a 25.8 g increase was observed in the normal control group after the first 3 days. The low and medium groups showed 23.3 g and 20.4 g increases, respectively, after the first 3 days. Decreases in body weight were recovered during the next 4 days. In contrast, no changes were noted in hematological and blood biochemistry parameters after DDAC exposure. Furthermore, only mild effects were observed on bronchoalveolar cell differentiation counts and cell damage parameters in the BAL fluids of the medium and high groups. Although inflammatory cell infiltration and interstitial pneumonia were partially observed, fibrosis was not found in the lungs of the medium and high groups. In conclusion, body weight gain and the lungs were mainly affected by DDAC exposure. The no-observed-adverse-effect level (NOAEL) for DDAC was determined as $0.15mg/m^3$.
Purpose: This study was based on social-role theory, and purposes were to investigate (1) how depression and health determinants vary with married and employed women, and (2) what factors contribute to depression according to family cycle. Methods: A stratified convenience sample of 765 married and employed women was recruited during May to August 2010. Study variables of depression, socio-demographic threatening factors, psycho-stimulating factors, and social-role related factors were measured via a structured questionnaire. Results: Prevalence rate for depression was 18.6%, with highest rate (25.4%) from elementary laborers. Greater levels of depression were related to women's occupation, higher life stress, and poorer health; lower social support and vulnerable personality; higher levels of social-role related stress. From multivariate analysis, women with preadolescents were the most vulnerable to depression affected by occupation, life stress, personality, and parenting stress. These factors (except for occupational class) combined with economic status, social support, and housework unfairness were significant for depression in women with adolescents. Conclusion: Depression among married and employed women differs by psycho-stimulating and social role relevant factors in addition to occupational class and family life cycle. Female elementary laborers and women with children need to have the highest prioritization for community mental health programs.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.