• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.61-65
• /
• 2024

The effectiveness of CuSCN as a hole injection layer in large-area organic light-emitting diodes, organic solar cells, and thin-film transistors has been well demonstrated. Therefore, in this study, the surface, optical, and electrical analyses of CuSCN were carried out according to the solution process conditions in order to propose optimized film conditions. Various CuSCN solution concentrations were prepared to determine the film surface characteristics and to determine whether the film surface affects the electrical performance of the device. When the CuSCN solution concentration was low, the CuSCN film was not formed and coated in the form of islands, and when the solution concentration was increased, the CuSCN film was formed uniformly, which contributed to improving the conductivity of the device. In addition, a hole-only device was fabricated to demonstrate the role of CuSCN as a hole transport layer.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.65-72
• /
• 1999

In order to minimize flexible printed circuit(FPC), which is used in computer, communication, medical facility, aviation space industry, it is required to improve the interfacial adhesion of polymide/epoxy or polyimide/polyimide consists of FPC. In this study, it was considered to improve the adhesion strength of polyimide/epoxy joint by introducing functional group on polyimide film and improving mechanical property of epoxy. Functional group on polyimide film was introduced by changing polyimide film surface to polyamic acid in KOH aqueous solution. The optimum conditions for surface modification were the concentration of 1M KOH and treatment time of 5min. Also, the optimum adhesion strength of polyimide/epoxy joint was obtained using rubber modified epoxy and polyamic acid as a base resin and curing agent of epoxy adhesive, respectively. The degree of surface modification of polyimide film examined with contact angle measurement of FTIR, thus modification of polyimide to polyamic acid was identified. Fracture surface of plymide/epoxy joint was analyzed by scanning electron microscopy, and modified polyamic acid reimidezed to polymide as increasing curing temperature.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.168-173
• /
• 2003

Recently, according to the rapid progress in Flat-panel-display industry, there has been a growing interest in the poly-Si process. Compared with a-Si, poly-Si offers significantly high carrier mobility, so it has many advantages to high response rate in Thin Film Transistors (TFT's). We have investigated a new process for the high temperature Solid Phase Crystallization (SPC) of a-Si films without any damages on glass substrates using thin film heater. because the thin film heater annealing method is a very rapid thermal process, it has very low thermal budget compared to the conventional furnace annealing. therefore it has some characteristics such as selective area crystallization, high temperature annealing using glass substrates. A 500 $\AA$-thick a-Si film was crystallized by the heat transferred from the resistively heated thin film heaters through $SiO_2$ intermediate layer. a 1000 $\AA$-thick $TiSi_2$ thin film confined to have 15 $\textrm{mm}^{-1}$ length and various line width from 200 to 400 $\mu\textrm{m}$ was used as the thin film heater. By this method, we successfully crystallized 500 $\AA$-thick a-Si thin films at a high temperature estimated above $850^{\circ}C$ in a few seconds without any thermal deformation of g1ass substrates. These surprising results were due to the very small thermal budget of the thin film heaters and rapid thermal behavior such as fast heating and cooling. Moreover, we investigated the time dependency of the SPC of a-Si films by observing the crystallization phenomena at every 20 seconds during annealing process. We suggests the individual managements of nucleation and grain growth steps of poly-Si in SPC of a-Si with the precise control of annealing temperature. In conclusion, we show the SPC of a-Si by the thin film heaters and many advantages of the thin film heater annealing over other processes

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.394-399
• /
• 2017

To resolve environmental pollution caused by synthetic packaging materials, biodegradable films have been studied as an alternative. In this study, we prepared rockfish skin gelatin (RFG) and nano-clay (Cloisite $Na^+$ and Cloisite 10A) composite films to compare the effects of nano-clay on the physical properties of RFG film. Gelatin was extracted from rockfish skin and used to prepare RFG film with sorbitol as a plasticizer. Tensile strength (TS), water vapor permeability (WVP), and water solubility (WS) of the RFG film were 15.0 MPa, $2.70{\times}10^{-9}g\;m/m^2\;s\;Pa$, and 53.8%, respectively. Addition of nano-clay to the RFG film increased TS and decreased WVP and WS. The X-ray diffraction analysis and scanning electron microscopic results suggest that RFG/nano-clay composite films formed an exfoliated structure. These results indicate that RFG/nano-clay composite films can be applied as biodegradable packaging materials in the food industry.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.66-82
• /
• 2015

This study looks into the differences between the two different genres of dramatic renditions on film- television dramas and movies, by studying the respective characteristics of screenplays for television and movies, and comparing the disparity in status between the powerful television drama writer and the powerless movie screenwriters as well as actual power structures within the Korean media industry. It explores the intensifying problems of high cost drama productions and poor treatment of screenwriters, as well as established practices in the movie and television industries so as to analyze problems comprehensively and seek balanced growth within these industries. The Hollywood screenwriting system is taken as a point of comparison in seeking solutions and exploring the direction that Korean film and television industries should take in the future.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.293-315
• /
• 2013

The number of French movies imported to and released in S. Korea is constantly increasing. All French movies released in Korean theatres, however, are not a great success. For the domestic film market and audiences, the idea French cinema is generally equivalent to 'diversity cinema' or 'arthouse films' is common notion. In this respect, French movies introduced throughout the country would be culture product into which one can read other cultural significances different from that of domestic cinema, and also serve significant cultural value to understand diversity in cinema, for domestic audiences. However, it could be said that French movies, in common with Hollywood films, obey rules in the film industry and needs for audience trends. In this content, what the researchers want to do is to analysis the tendency of the domestic audience reception and main causes of commercial success in the domestic film market, analysing Taken produced in France. The analysis, most of all, suggests the consideration for the film industry beside the notion of cultural diversity in cinema, as imported films are released in the domestic theatre. For this, the study examines the promotional strategy the french cinema perceived generally as the arthouse film applies extensively, analysing on Taken, and inquires into factors of commercial success, using SWOT Analysis. This study, the first of all, (briefly) examines what audiences consider when they choose a film to watch, articulating (generally) the choice-and-consume modality of the domestic audience. And then, it examines dominant factors Taken was a commercial success in domestic film market, even though the film is a french film, using SWOT Analysis. On the basis of SWOT Analysis, finally, this study draws up promotional plan for Taken, and shed new light on dominant preconditions, when the foreign cinema would be imported from the now on.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.1-13
• /
• 2019

This study tried to explore the contents of film critics' reviews reported in the press. Based on fifty nine Korean movies with over 100,000 audience in 2017, this study collected 1113 reviews from fifty five movies with the exception of four without reviews. This study focused on the correlation between film's overall quality and four evaluation items such as directing, acting, story, and the visual. Examining the difference in the report timing of the review, the length of the review, and the intensity of the opinion, this study also analyzed the relationship between the internal aspects of reviews and box office performance. According to the results, the valence of critics' reviews was generally positive. Looking at the difference of reporting time, this valence was higher in the week before release than in the release week of film. The evaluation items of reviews were highly covered both before movie release and in the opening week. These were significantly declined in the second week of release. In the relationship between the number of reviews by each movie and box office performance, a positive correlation was found.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.481-486
• /
• 2011

It is important to predict the behavior of a liquid film around a rotating cylinder in the film coating process of the steel industry. When the cylinder rotates, the behavior of the liquid film on the rotating cylinder surface is influenced by the cylinder diameter, the rotation speed, the gravitational force, and the fluid properties. These parameters determine the liquid film thickness and the rise of the film on the cylinder surface. In the present study, the two-phase interfacial flow of the liquid film on the rotating cylinder were numerically investigated by using a VOF method. For various rotation speeds, cylinder diameters and fluid viscosities, the behavior of liquid film on the rotating cylinder were predicted. Thicker film around the rotating cylinder was observed with an increase in the rotation speed, cylinder diameter, and fluid viscosity. The present results for the film thickness agreed well with available experimental and analytical results.

• Journal of the Korean Geographical Society
• /
• v.45 no.2
• /
• pp.256-274
• /
• 2010

The aim of this study is to examine agglomeration patterns of advertising industries and spatial networks of advertisement production in Korea. The focus of analysis is the agglomeration pattern of advertising industries within Seoul because these are agglomerated in Seoul like other business services. Analysis methods are local Moran's I index and location quotient with the regional percentages of each sector's number of employees. Clusters in Gangnam Area are related to start-up advertising firms and global agencies entering domestic advertising markets. Network analysis is used to investigate the spatial networks of TV advertisement production between advertising agencies(AA) and film productions(FP). After transformation of AA-FP network matrix to regional matrix centrality index and brokerage scores are calculated. This analysis shows individual region's different role and position in the AA-FP network. Many agencies in or out of Gangnam Area outsource most advertisement makings to film productions in Gangnam Area. Advertising industry dusters in Gangnam Area is important as of the destination of advertisement production networks and the circulation of those networks.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1059-1065
• /
• 2020

Demand for pressure sensors is increasing in various fields such as machinery, healthcare and medical care. A recent study is being conducted to create sensors that are more sensitive and have longer linear sections based on measurement principles. In this paper, a film-type sensor with a membrane structure was developed to measure the pressure distributed in the axial direction of a hot roll laminator. Performance of sensors was evaluated by resistance and durability according to membrane diameter. The resistance of the membrane sensor varies according to the contact state and contact area of the electrode. Therefore, the membrane diameter selection is important. Experiments showed the most pronounced variation in resistance under pressure at 8 mm in diameter of membrane. Reliability evaluation of sensors was carried out at room temperature and high temperature. The pressure on the sensor was pressurized 1000 times to measure the initial resistance and the resistance after the evaluation to analyze the change. Sensors showed stable results with low resistance changes of 5.15% and 6.27%, respectively. A large area sensor manufactured using the developed sensor also showed reliable results.