• 한국산림과학회지
• /
• 제96권1호
• /
• pp.54-57
• /
• 2007

요소수지접착제를 합판제조용 접착제와 유사하게 실험실에서 합성하고, 합성한 요소수지접착제를 증량제, 충전제, 산경화촉매제와 혼합하였다. 요소수지접착제 혼합물의 고형분량은 56.1%이고, 물은 43.9%였다. 국산재와 요소수지접착제 혼합물로 5종류의 Com-Ply를 제조하고, KS F 3101 보통합판의 인장 전단 접착력 시험 및 KS F 3104 파티클보드의 휨파괴계수 시험을 수행했다. 성능 평가된 결과는 제조된 5종류의 Com-Ply에서 모두 적합한 결과를 보여줬다. 이런 결과는 본 연구에서 사용된 요소수지접착제 혼합물이 국산재 Com-Ply제조에 적합하다는 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제29권2호
• /
• pp.100-108
• /
• 2001

제재목으로부터 얻을 수 있는 부재(部材)(parts)의 수율을 미리 예측할 수 있다면 최고의 수율 보장이 가능한 방법으로 재단할 수 있으므로 목재산업의 생산성을 크게 향상시킬 수 있다. 특히, 옹이와 같은 결점들이 많이 포함되어 있는 국산 중소경재의 경우 수율 예측을 통한 재단최적화는 매우 필요한 공정이 아닐 수 없다. 본 연구에서는 국산 상수리나무와 소나무를 대상으로 제재목 database를 구축하여 다중 종절우선 공정 모형에 적용함으로써 국산재의 가공효율을 탐색하는 동시에 최고의 수율이 보장되는 재단 방법을 제시하고자 하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.202-212
• /
• 2017

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.141-148
• /
• 2013

The goal of this study was to find the optimum lamina size from red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica) logs for the cross laminated timber (CLT) production. From visual inspection of the logs from two species, red pine log showed a larger knot and warp compared to the Japanese cedar. Different cross-sectional sizes of lamina ($110mm{\times}30mm$, $110mm{\times}40mm$, $110mm{\times}50mm$, $50mm{\times}30mm$, $30mm{\times}30mm$) from two species were analyzed for yield and grade. Regardless of the species, the optimized cross sectional size for maximizing the yield was $110mm{\times}30mm$. In grading for the different size laminas from Japanese cedar and red pine, a higher percentage of the first and second grade was found from the $110mm{\times}30mm$ lamina cut.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.56-63
• /
• 1999

국산 죽재를 목재산업용 원재료로 활용할 수 있는 가능성을 타진하기 위하여 대표적인 우리나라 대나무 수종인 전남 담양산 맹종죽, 분죽 및 왕대의 절삭과 건조특성 등 기계가공성을 조사, 분석하였다. 연구 결과 쪼개기저항은 공구가 2.5cm 피삭재 내부로 진입하였을 때 최대로 상승하였으며, 칼날각 15도의 쐐기형 공구를 이용하면 쪼개기저항을 최소화할 수 있는 것으로 밝혀졌다. 또한 둥근톱과 띠톱에 의한 죽재의 절삭면 품질은 목재의 경우에 비하여 비교적 양호하였다. 한편 두께 12mm 맹종죽을 함수율 60%에서 10%까지 온도 $70^{\circ}C$로 건조하는데 약 62.5 시간이 소요되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.591-601
• /
• 2021

Recently it is trend to increase wood use as carbon neutral materials, there is recognized to need necessarily durability improvement of wooden building. It is very rare to report existing on the identification of isolates causing discoloration in domestic weathered wooden building used for long period. The objective of this study was identification of fungi that cause discoloration on the exteriors of weathered domestic wooden buildings in the southern part of South Korea. Our findings can be helpful to establish protection technology for weather deterioration of domestic wooden buildings. Wood chip samples presumed to be contaminated with sapstain fungi were collected from the surface of wooden members used in wooden buildings at Jangheung, Jeollanam-do (two locations, #13 and #14), and Jeju Island (two locations, #31 and #33). The growth of microorganisms was confirmed by performing culture tests for the collected samples, and fungi were isolated, purified, and identified. The results indicated that the fungal strains isolated from wooden buildings #13 and #14 at Jangheung, Jeollanam-do, were 99.83% and 100% homologous to Aureobasidium melanogenum, respectively. For wooden building #31 at Jeju Island (two locations), the fungal strain isolated was 100% homologous to A. melanogenum, which is the same species isolated from the wooden buildings at Jangheung. The fungal strain isolated from wooden building #33 (Jeju Island) had 99.83% homology with A. pullulans, which is commonly found in wood degraded by weather or ultraviolet rays. Our findings can be utilized as a basis for establishing protection technology in domestic wooden buildings.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.608-617
• /
• 2020

For efficient use and expansion of domestic small- and medium-diameter woods, cross-laminated wood panels composed of tropical hardwoods and domestic temperate woods were fabricated, and the bending creep behavior under long-term loading was investigated. The bending creep curve of the cross-laminated wood panels showed an exponential function graph with a sharp increase at the top right side. The wood panel composed of a teak top layer and larch core and bottom layers recorded the highest initial deformation, and that composed of a merbau top layer and tulip core and bottom layers showed the lowest initial deformation. Creep deformation of the cross-laminated wood panels showed the highest value in that composed of a teak top layer and larch core and bottom layers and showed the lowest value in that composed of a merbau top layer and tulip core and bottom layers. The obtained creep deformation is 3.1-4.3 times that of merbau, however, it is remarkably lower than that of tulip and larch. The highest relative creep was recorded by the wood panel composed of merbau top layer and larch core and bottom layers, whereas that composed of the teak top layer and tulip core and bottom layers showed the lowest relative creep.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.101-109
• /
• 2019

This paper examines the classification of five coniferous species, including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cedar (Cryptomeria japonica), and cypress (Chamaecyparis obtusa), using near-infrared (NIR) spectra. Fifty lumber samples were collected for each species. After air-drying the lumber, the NIR spectra (wavelength = 780-2500 nm) were acquired on the wide face of the lumber samples. Soft independent modeling of class analogy (SIMCA) was performed to classify the five species using their NIR spectra. Three types of spectra (raw, standard normal variated, and Savitzky-Golay $2^{nd}$ derivative) were used to compare the classification reliability of the SIMCA models. The SIMCA model based on Savitzky-Golay $2^{nd}$ derivatives preprocessing was determined as the best classification model in this study. The accuracy, minimum precision, and minimum recall of the best model (PCA models using Savitzky-Golay $2^{nd}$ derivative preprocessed spectra) were evaluated as 73.00%, 98.54% (Korean pine), and 67.50% (Korean pine), respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.444-450
• /
• 2011

The goal of this study is to investigate bending properties of domestic timber. Three representative structural timber from Larix kaempferi, Pinus koraiensis, and Pinus densiflora, in the northeastern South Korea were selected. Visual grading for the timber was conducted based on KFRI notification 2009-01 and the bending strength for the timber was evaluated based on ASTM D 198 bending. The high percentage of grade 1 and 2 for Larix kaempferi shows that the KFRI notification was optimized for this species. The bending strength distributions from Pinus koraiensis and Pinus densiflora were very similar. It could be possible to specify the allowable bending properties of these two Specification using a united species group similar to spruce-pine-fir. Lastly, the bending strength of $120{\times}180mm$ structural members was higher than both existing values in KBC 2009 and design values for timber of imported species described in the NDS. Thus, 120 mm thick domestic softwoods could replace the commercial imported species and the KBC should be modified to provide design values for both timber and dimensional lumber, respectively, like NDS.

• 한국가구학회지
• /
• 제19권6호
• /
• pp.460-465
• /
• 2008

When wood is exposed to natural weathering and UV radiation discoloration progresses. The color variation of heat-treated wood was investigated. Four domestic species were selected and heat-treated at $220^{\circ}C$ and naturally weathered for 42 days. Their colors were measured with a portable colorimeter. The color variations were different between species. The Korean red pine specimens were highly discolored by the natural weathering even though they were heat-treated. In contrast to Korean red pine, Korean pine is less discolored. The maximum color difference of larch was lower than Korean red pine. All specimens of birch exceeded the color difference criterion of 15 after 25 hours with the maximum of 28.