• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.922-929
• /
• 2005

This paper proposes an adaptive pilot beacon equipment for mobile communication systems based on direct spread spectrum technology which generates the pilot channel for handoff between base stations by using the information acquired from the downstream wireless signal regarding the overhead channel information. Such an adaptive pilot beacon equipment will enable low power operation since among the wireless signals, only the pilot channel will be generated and transmitted. The pilot channel in the downstream link of the CDMA receiver is used to acquire time and frequency synchronization and this is used to calibrate the offset for the beacon, which implies that time synchronization using GPS is not required and any location where forward receive signal can be received can be used as the installation site. The downstream link pilot signal searching within the CDMA receiver is performed by FPGA and DSP. The FPGA is used to perform the initial synchronization for the pilot searcher and DSP is used to perform the offset correction between beacon clock and base station clock. The CDMA transmitter the adaptive pilot beacon equipment will use the timing offset information in the pilot channel acquired from the CDMA receiver and generate the downstream link pilot signal synchronized to the base station. The intermediate frequency signal is passed through the FIR filter and subsequently upconverted and amplified before being radiated through the antenna.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.137-147
• /
• 2017

An accident during pilotage may cause several problems such as crippling the harbour function, environmental disruption, loss of life. Since the pilot plays an important role in the safe operation of the port, securing their safety is directly connected to the vessel's safety coming into port in Korea. Pilotage service is offered on request without distinction of day and night. And traveling by helicopter and boarding/disembarking using a pilot ladder from and to a pilot boat have a high risk of falling into the sea. So, pilots can fall into the sea while boarding/disembarking from ship which can lead to serious injury by cardiac arrest. A number of pilots have died or severely injured due to fall from the pilot ladder during embarkation and disembarkation up to now. Current safety measures at embarkation and disembarkation required by pilotage act and IMO resolutions could not prevent all the pilot related accidents. Therefore, to prevent pilot accident during boarding/disembarking from ship, it is necessary to include safety training requirement for new pilots under the requirements for licensing of pilotage act. It is also necessary to compel pilots to take necessary personal protective equipment when they use a pilot ladder. In addition, the placement of emergency kit on pilot boats and first-aid training are required in order to deal with emergency situation promptly.

• Korean Medical Education Review
• /
• v.20 no.1
• /
• pp.15-19
• /
• 2018

The longitudinal integrated clerkship is an innovative approach in medical education that emphasizes continuity as a key principle to provide student-centered experiences and learning. Seoul National University College of Medicine decided to adapt longitudinal integrated clerkships to the new curriculum beginning in 2018, and therefore conducted pilot studies in 2016 and 2017. This study aimed to analyze the program evaluation results of the two pilot programs and discuss issues related to the successful implementation of longitudinal integrated clerkships in Korea. We conducted a focus group interview with nine students who participated in the 2016 pilot program and 13 students who participated in the 2017 pilot program. We also conducted a focus group interview with 11 faculty members who either participated in the pilot program or will participate in the main program. From the 2016 experience, we found that it is not appropriate to assign each patient to a single student and let the students contact their patients personally for feasibility and safety reasons. In the 2017 pilot program, we assigned each patient to a group of students, which made it more feasible for the students to follow-up with their patients. The students were satisfied with their new experience of longitudinal patient follow-up and regular meetings in the pilot program. Faculty emphasized the importance of establishing the course objectives and holding an orientation for the students and the faculty. Further study is planned to evaluate the early outcomes of the main longitudinal integrated clerkship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.535-538
• /
• 2009

Auto Pilot is the system which move automatically the vessel through locating operation mode to automatic after entering operating course using a electronic chart or plotter. And water jet is the a propulsion system that make a power to push the vessel through spouting the accelerated water which is absolbed by the hole in the bottom of vessel. The water jet receive the effect of the depth of water lowly, it's acceletion efficiency is higher under high speed and have an advantage on vibrating and floating sound, so it's demand is increasing as new propulsion system. However, the signal systems of auto Pilot and water jet are defferant, we need the system to communicate between each system. We propose the interface system which communicate between Auto pilot and water jet efficiently in this journal.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.579-586
• /
• 2019

Pilot Point Method (PPM) is one of the popular methods to search hydraulic conductivities in the inverse method using groundwater flow equations. In this study, the Simultaneous Search based Pilot Point Method (SSBM) was applied with diverse information (e.g. hydraulic heads and/or tracer concentration) applications over previously developed sensitivity based Pilot Point Method (e.g. D-optimality based Pilot Point Method: DBM). In the case of DBM, due to the minimized the variance size, tracer concentration can be recognized as a tool to control the searching space of hydraulic conductivities. SSBM reduced the procedure of hydraulic conductivity searching, though it produced more variance for exploring hydraulic conductivities. In addition, SSBM was dependent on the initial hydraulic conductivity values for search finalized hydraulic conductivities. When tracer concentration was applied, searching hydraulic conductivities was more preferable than only when hydraulic head was applied. Applications of various data for searching hydraulic conductivities is recommended as a more efficient way.

• Journal of Korean Clinical Nursing Research
• /
• v.29 no.3
• /
• pp.223-237
• /
• 2023

Purpose: This study aimed to investigate the impact of a nurse shift improvement pilot project on nurses' shift adjustment, work-life balance, and turnover intention, as well as nurses' experiences of participating in the pilot project. Methods: An explanatory sequential mixed-methods study was performed. Survey data was collected from a total of 1,051 nurses both in participant and non-participant groups. For the qualitative study, focus group interviews were conducted with 22 nurses who participated in the shift improvement pilot, including 12 staff nurses, 7 nurse managers, and 3 substitute nurses. Results: There were significant positive effects on the key variables of nurses' shift adjustment, work-life balance, and turnover intention in the group that participated in the nurse shift improvement pilot project. Based on the qualitative study, participants in the shift improvement pilot project indicated that it enabled nurses to recover their circadian rhythm, and achieve a better work-life balance, and they wanted to continue working as a nurse, and hoped expanded application of the pilot project. Conclusion: In order for expanded implementation of the pilot project and continued improvement in the shift system, we recommend establishing compensation standard, systematizing the use of substitute nurses, developing guidelines for shift schedules, and expanding the shift improvement pilot project to other departments such as the emergency room.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.543-552
• /
• 2010

Due to increase in urban tunnelling as urban population and traffic volume increase, problems related with site security and civil appeal also increase. This paper presents a comparative analysis between conventional 2-arch tunnel method and non-pilot 2 arch tunnel method, which were performed in the basic design of Wie-Rae region. According to the analysis results, non-pilot 2-arch tunnel method is more efficient in terms of stability, constructability, and economic aspect. It is authors' wish that design procedure and method presented in this paper could help the design and construction of non-pilot 2-arch tunnel that should be planned in the near future.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.101-108
• /
• 2000

In this study, we tested hybrid pilot system combined with soil vapor extraction and bioventing methods on the contaminated railroad soil. So, we found out the remediability and operating conditions. Air permeability(k) and gas phase(O$_2$/CO$_2$/VOCs) level trend are very important to determine the remediation rate of the contaminated sites. Throughout hybrid pilot test on different conditions, the range of air permeability(k) was 1985∼1194 darcy. The tests results in hybrid system was appropriate on this test sites, and the suitable injection air flow rate was 3.5㎥/hr. So, we suggested a basic data for the remediation and management of contaminated railroad soil.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.341-344
• /
• 2004

This paper presents results of test for combustion vibration in the pilot furnace for fossil power plant under combustion test. We measured static pressure variation in the pilot furnace together with air and fuel flow. From test results, it shows that vibration magnitude is affected by air and fuel flow. Also, a finite element analysis using a commercial S/W is performed to calculate acoustic mode of the pilot furnace. These results show that dominant frequency occurred is related to acoustic natural frequency of furnace. After this, it needs to be studied the relation between dominant frequency of combustion vibration and air flow rate.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.381-381
• /
• 2005