• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.199-212
• /
• 2007

If a type IP-2 transport package were to be subjected to a free drop test and a penetration test under the normal conditions of transport, it should prevent a loss or dispersal of the radioactive contents and a more than 20% increase in the maximum radiation level at any external surface of the package. In this paper, we suggested the analytic method to evaluate the structural safety of a type IP-2 transport package using a thick steel plate for a structure part and a bolt for tying a bolt. Using an analysis a loss or dispersal of the radioactive contents and a loss of shielding integrity were confirmed for two kinds of type IP-2 transport packages to transport radioactive waste drums from a waste facility to a temporary storage site in a nuclear power plant. Under the free drop condition the maximum average stress at the bolts and the maximum opening displacement of a lid were compared with the tensile stress of a bolt and the steps in a lid, which were made to avoid a streaming radiation in the shielding path, to evaluate a loss or dispersal of radioactive waste contents. Also a loss of shielding integrity was evaluated using the maximum decrease in a shielding thickness. To verify the impact dynamic analysis for free drop test condition and evaluate experimentally the safety of two kinds of type IP-2 transport packages, free drop tests were conducted with various drop directions. For the tests we examined the failure of bolts and the deformation of flange to evaluate a loss or dispersal of radioactive material and measured the shielding thickness using a ultrasonic thickness gauge to assess a loss of shielding integrity. The strains and accelerations acquired from tests were compared with those by analyses to verify the impact dynamic analysis. The analytic results were larger than the those of test so that the analysis showed the conservative results. Finally, we evaluated the safety of the type IP-2 transport package under the stacking test condition using a finite element analysis. Under the stacking test condition, the maximum Tresca stress of the shielding material was 1/3 of the yielding stress. Two kinds of a type IP-2 transport package were safe for the free drop test condition and the stacking test condition.

• Journal of Broadcast Engineering
• /
• v.10 no.1 s.26
• /
• pp.43-56
• /
• 2005

In the existing broadcasting environment, it is not easy to serve the bi-directional service between a broadcasting server and a TV audience. In the uni-directional broadcasting environments, almost TV programs are scheduled depending on the viewers' popular watching time, and the advertisement contents in these TV programs are mainly arranged by the popularity and the ages of the audience. The audiences make an effort to sort and select their favorite programs. However, the advertisement programs which support the TV program the audience want are not served to the appropriate audiences efficiently. This randomly provided advertisement contents can occur to the audiences' indifference and avoidance. In this paper, we propose the target advertisement service for the appropriate distribution of the advertisement contents. The proposed target advertisement service estimates the audience's profile without any issuing the private information and provides the target-advertised contents by using his/her estimated profile. For the experimental results, we used the real audiences' TV usage history such as the ages, fonder and time of the programs from AC Neilson Korea. And we show the accuracy of the proposed target advertisement service algorithm. NDS (Normalized Distance Sum) and the Vector correlation method, and implementation of our target advertisement service system.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.557-575
• /
• 2005

Much research in core technologies has been done to make it possible the ubiquitous video services over various kinds of user information terminals anytime anywhere in the way the users want to consume. In this paper, we design plototypesystem architecture for the ubiquitous TV program content consumption based on user preference via various kinds of intelligent information terminals in digital home environment, and present an implementation and testing results for the prototype system. For the system design, we utilize the TV Anytime specification fur the consumption of TV program contents based on user preference in TV programs, and also use the MPEG-21 DIA (Digital Item Adaptation) tools which are the representation schema formats in order to describe the context information for user environments, user terminal characteristics, user characteristics for universal access and consumption of the preferred TV program contents. The proposed ubiquitous content mobility prototype system is designed to make it possible to seamlessly consume contents by a single user or multiple users via various kinds of user terminals for the TV program contents they watch together. The proposed ubiquitous content mobility prototype system in digital home environment consists of a home server, a display TV terminal, and an intelligent information terminal. We use 42 TV programs contents in eight different genres from four different TV channels in order to test our prototype system.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.81-86
• /
• 2015

The purpose of our paper was to investigate the migration level of 4,4'-MDA(4,4'-methylenedianiline), 2,4-TDA(2,4-toluenediamine), aniline, acrylonitrile and methylmeth acrylate from plastic cookwares into food simulants and to evaluate the safety of each monomers. The test articles for monomers were PA (polyamide) items for 4,4'-MDA, 2,4-TDA and aniline, PU (polyurethane) items for 4,4'-MDA, ABS (acrylonitrile-butadiene- styrene) items for acrylonitrile, and acrylic resin items for methylmethacrylate. All the article samples of 321 intended for contact with foods were purchased in domestic market. 4,4'-MDA, 2,4-TDA and aniline were analyzed by LC-MS/MS (liquid chromatography -tandem mass spectrometer), acrylonitrile by GC-NPD (gas chromatography-nitrogen phos phorus detector) and methyl methacrylate by GC-FID (gas chromatography-flame ionization detector). The migration level of monomers were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intake (EDI, mg/kg bw/day)s were $2.39{\times}10^{-9}$ and $1.20{\times}10^{-9}$ for 4,4'-MDA and 2,4-TDA of PA, $4.32{\times}10^{-9}$ for acrylonitrile of ABS and $2.27{\times}10^{-7}$ for methylmethacrylate of acrylic resin. Reference Dose (RfD, mg/kg bw/day) of acrylonitrile and tolerable daily intake (TDI, mg/kg bw/day) of methacrylate were established respectively as 0.001 by EPA (US Environmental Protection Agency) and as 1.2 by WHO (World Health Organization). When comparing with RfD and TDI, the EDIs of acrylonitrile and methylmethacrylate accounted for $4.32{\times}10^{-4}%$ and $1.89{\times}10^{-5}%$ respectively.

• 대한공업교육학회지
• /
• v.42 no.2
• /
• pp.108-122
• /
• 2017

This research paper is to examine James Watt who led the 1st industrial revolution successfully. His great work was called monumental achievement in the human history of civilization. Here, we looked over the Watts' educational environment during his infant, juvenile, and adolescence period and also, his learning attitude about his own field through literature review. The basic infra of soft and hard wares for the industrial revolution through the process of R & D on new developing steam engine resulted from the very industrial revolution and its R & D environment were to be investigated. The useful information and knowledge from this process of the research are able to give an appropriate educational guidance to bring up the development of creativity in schooling systems. And also a lesson from the past could be used to provide the desirable direction for the 4th industrial revolution which is just begun to start now. The main results from this study are as follows; First, Watts' parents positively guided him onto the technology of manual field because they recognized their son was interested in technology field. The parents' attitude stimulated and guided his sons' self-development, had been equal to the aims of education. Second, Watt made a chance of making friendships with professors of Glasgow University. He spontaneously had done self-directed learning for getting knowledge and technology, and thus he became an expert of practical engineer and theorist. Third, the Lunar society, which was jumping over one's social position in their society of the 18th century through new thinking way, leading new ages had been very good R & D social infra for Watt to open and connect new advanced level of science and technology in his age. This society provided a study environment fields for their members to exchange their ideas of scientific curiosity and freely inquiry, technology informations. They had discussed and understood the issues to be occurred in their own fields and accumulated necessary knowledge for problem-solving, respectively. Such as this R & D system environment will be also considered in the modern research group. Fourth, the entrepreneur such as Boulton, who understand technology and grasp its value in future, is needed. The system of 'grue of management' will support the researcher with financial support, which is necessary in R & D. And the researcher like Watt who takes pleasure in technology itself and study eagerly in his field without financial problems, that is, 'grue of technical expert' is essential when leading to success in the industrial revolution.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.581-594
• /
• 2004

CREAHS II carried out an intensive hydrographic survey covering almost entire East Sea in 1999. Hydrographic data from total 203 stations were released to public on the internee. This paper summarized the results of water mass analysis by OHP (Optimum Multiparameter) method that utilizes temperature, salinity, dissolved oxygen, pH, alkalinity, silicate, nitrate, phosphate and location data as an input data-matrix. A total of eight source water types are identified in the East Sea: four in surface waters(North Korea Surface Water, Tatar Surface Cold Water, East Korean Coastal Water, Modified Tsushima Surface Water), two intermediate water types (Tsushima Middle Water, Liman Cold Water), two deep water types (East Sea Intermediate Water, East Sea Proper Water). Of these NKSW, MTSW and TSCW are the newly reported as the source water type. Distribution of each water types reveals several few interesting hydrographic features. A few noteworthy are summarized as follows: The Tsushima Warm Current enter the East Sea as three branches; East Korea Coastal Water propagates north along the coast around $38^{\circ}N$ then turns to northeastward to $42^{\circ}N$ and moves eastward. Cold waters of northern origin move southward along the coast at the subsurface, which existence the existence of a circulation cell at the intermediate depth of the East Sea. The estimated volume of each water types inferred from the OMP results show that the deep waters (ESIW + ESPW) fill up ca. 90% of the East Sea basins. Consequently the formation and circulation of deep waters are the key factors controlling environmental condition of the East Sea.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.23
• /
• pp.155-219
• /
• 2004

This paper focuses on two recent legislative developments in electronic commerce: the "Uniform Computer Information Transactions Act" ("UCITA") of USA and the "preliminary draft convention on the use of data message in [international trade] [the context of international contracts]" ("preliminary draft Convention") of UNCITRAL. UCITA provides rules contracts for computer information transactions. UCITA supplies modified contract formation rules adapted to permit and to facilitate electronic contracting. UCITA also adjusts commonly recognized warranties as appropriate for computer information transactions; for example, to recognize the international context in connection with protection against infringement and misappropriation, and First Amendment considerations involved with informational content. Furthermore, UCITA adapts traditional rules as to what is acceptable performance to the context of computer information transactions, including providing rules for the protection of the parties concerning the electronic regulation of performance to clarify that the appropriate general rule is one of material breach with respect to cancellation (rather than so-called perfect tender). UCITA also supplies guidance in the case of certain specialized types of contracts, e.g., access contracts and for termination of contracts. While for the most part carrying over the familiar rules of Article 2 concerning breach when appropriate in the context of the tangible medium on which the information is fixed, but also adapting common law rules and rules from Article 2 on waiver, cure, assurance and anticipatory breach to the context of computer information transactions, UCITA provides a remedy structure somewhat modeled on that of Article 2 but adapted in significant respects to the different context of a computer information transaction. For example, UCITA contains very important limitations on the generally recognized common law right of self-help as applicable in the electronic context. The UNCITRAL's preliminary draft Convention applies to the use of data messages in connection with an existing or contemplated contract between parties whose places of business are in different States. Nothing in the Convention affects the application of any rule of law that may require the parties to disclose their identities, places of business or other information, or relieves a party from the legal consequences of making inaccurate or false statements in that regard. Likewise, nothing in the Convention requires a contract or any other communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract to be made or evidenced in any particular form. Under the Convention, a communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract, including an offer and the acceptance of an offer, is conveyed by means of data messages. Also, the Convention provides for use of automated information systems for contract formation: a contract formed by the interaction of an automated information system and a person, or by the interaction of automated information systems, shall not be denied on the sole ground that no person reviewed each of the individual actions carried out by such systems or the resulting agreement. Further, the Convention provides that, unless otherwise agreed by the parties, a contract concluded by a person that accesses an automated information system of another party has no legal effect and is not enforceable if the person made an error in a data message and (a) the automated information system did not provide the person with an opportunity to prevent or correct the error; (b) the person notifies the other party of the error as soon as practicable when the person making the error learns of it and indicates that he or she made an error in the data message; (c) The person takes reasonable steps, including steps that conform to the other party's instructions, to return the goods or services received, if any, as a result of the error or, if instructed to do so, to destroy such goods or services.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.361-390
• /
• 2018

Users of KakaoTalk emoticons use Kakao Talk emoticons as means of communicating their emotions in virtual space. Emotional state is represented by design element (auxiliary, color, form, motion) and storytelling element contained in emoticons. The purpose of this study is to investigate the factors of the storytelling and design elements of kakaoTalk emoticons and how they prefer the kakaoTalk emoticons as emotional expression means. In terms of storytelling, crocodiles, peaches, dogs, ducks, lions, moles, and rabbits were made up of ordinary fruits and animals. Most of the emoticons are composed of stories with unique personality, and each story has a complex one by one, which makes it easy for users to approach and use them. In terms of design, I used various auxiliary elements (flame, sweat, tears, runny nose, angry eyes, etc.) to express angry, sincere, nervous, begging, joy, and sadness. The color elements consisted of most of the warm color series with the unique colors (green, red, yellow, pink, white, black, brown, etc.) of emoticon characters regardless of feelings of joy, anger, sadness, pleasure. The form factor is composed of a round shape when expressing factors such as joy and sadness. On the other hand, when FRODO and NEO express sadness and anger, they represent the shape of a rectangle. The motion elements are horizontal, vertical, and oblique expressions of APPEACH, NEO, TUBE, and JAY-G, expressing emotional expressions of sadness, anger, and pleasure. APEACH, TUBE, MUZI & / Shows the dynamic impression of the oblique and the radiation / back / forward / rotation. The anger of TUBE and FRODO shows horizontal / vertical / diagonal and radial motion. As a result of this study, storytelling is structured in accordance with each emoticon character. In terms of design, auxiliary elements such as flame, sweat, and tears are represented by images. The color elements used the unique colors of the character series regardless of the difference of emotion. The form factor represented various movements for each emotion expression. These findings will contribute to the development of communication, emotional design and industrial aspects. Despite the significance of the above paper, I would like to point out that the analysis framework of the storytelling and the semiotic analysis of the supplementary elements are not considered as limitations of the study.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.255-263
• /
• 2006

Vol-oxidizer is a device to convert $UO_2$ pellets into $U_3O_8$ powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the $U_3O_8$ measuring the temperature distribution, and the volume of $UO_2$ and $U_3O_8$. We manufactured the new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets, and then analyzed the characteristics of the $U_3O_8$ powder for the verification. The experimental results show that the permeability of the $U_3O_8$ throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is $40{\mu}m$. The capacities of new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets were agree well with the predictions of design model.