• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.321-325
• /
• 2000

Gasket of vehicle engine maintains airtight between cylinder head and engine block under high temperature and pressure, and plays important role in heat conduction of engine. And the characterization of the nonlinear behavior of metal gasket fer various bead shapes is very important as basic research for estimation of gasket durability. But it is very difficult to analyze the behavior of gasket In real experiment. In this paper, to analysis effects of the bead shape on the nonlinear behavior of cylinder head gasket under uniform pressure, the virtual experiment using the nonlinear finite element method was performed. Results are analyzed with residual deformation and the sealing pressure. With the increase of the height and the width of bead, the residual deformation and the sealing pressure increase. And if the height is very high and the width is very narrow, the wrinkles are occurred in the gasket while working.

• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.81-89
• /
• 1998

In this study, the effects of the impeller shapes on the pump performances of the non-clogging and the screw-type centrifugal pumps are experimentally studied. The characteristics of total head, efficiency and power of the non-clogging pump increase as the number of vanes increases. The screw-type centrifugal pump with the linear-shape vane shows a little better performance than that of the screw-type centrifugal pump with the curved-shape vane. The differences in the characteristics of total head, efficiency and power are, however, insignificant. Therefore, it is advisable that, considering the convenience of pump manufacturing, the screw-type centrifugal pump with the linear-shape vane should be used. This study also compares the pump characteristics of the non-clogging pump and screw-type centrifugal pump. The characteristics of total head and efficiency of the non-clogging pump are better than those of the screw-type centrifugal pump. The screw-type centrifugal pump requires more shaft power than the non-clogging pump.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.533-538
• /
• 2002

This research demonstrates the transient response of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. head-suspension system is modeled by the cantilever in order to get simulation results. Simulation results about total system of HDA are calculated by Runge-Kutta method.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.213-220
• /
• 1997

In this study, a design for a shape of centrifugal pump impeller has been performed using a p.c. under a Windows environment. Interaction between a user and a computer has been easily established using the Visual Basic. In determining an outer diameter of an impeller, steps are divided into two, a basic computational step and a refinment step. In this way user can enter his/her experience at the refinment step and hence can expect to lessen the nonlinear nature inherent to the design. In determining a shape of a side view of an impeller, the Bezier cubic curve has been used, and it can be seen that the Bezier cubic curves are well suited in the shape design under a Windows environment. By simply manipulating the four control points, one can generate various cubic curves among which one is selected. Also, a simple method, which can determine the curved position of an impeller vane, has been developed. These data can be used for final CAD drawings.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.13-21
• /
• 2001

The effect of water spray for the fire sprinkler depends on droples distribution over maximum possible floor area. The present study are carried out for the characteristics of water spray and droplets experimentally and numerically km two fire sprinkler heads which are CHM head and CHl heal CHl head is self-production and CHl head is widely used up to date. As the result of using CHM head, water spray and droplets are distributed over large area because CHM head has smooth surface and non-flamed shape. When the pressure of fire sprinkler head is low, SMD(sauter mean diameter) is large and when the pressure of fire sprinkler head is high, SMD is small.

• Animal cells and systems
• /
• v.1 no.2
• /
• pp.371-379
• /
• 1997

To investigate the movement of sperm head and the role of sperm neck in forward sperm motility in the Korean striped field mouse, Apodemus agrarius coreae, the morphological characteristics of the cauda epididymal spermatozoa were examined by light microscopy and scanning and transmission electron microscopy. Spermatozoa of A. agrarius coreae were characterized by the conspicuous shape of the acrosome and the long tail compared with those of other rodents. Total length of the sperm was $133\mu{m}$. The sperm head had a curved falciform shape. The head was 8.0${\mu}$m in length, and about 4.0 ${\mu}$m in width. The shape of acrosome had an openerlike form. The sperm tail (125 ${\mu}$m) consisted of four major segments: neck (0.5 ${\mu}$m), middle piece (29.5 ${\mu}$m), and principal piece plus the end piece (95 ${\mu}$m). The outer dense fibers were arranged in a horseshoe fashion, and No. 1, 5, 6, and 9 of the outer dense fibers were larger than the others. The mitochondrial bundles of middle piece were composed of a pair of arms, which surrounded the axone of the middle piece by the 45 0 angled helical structure. The total number of mitochondrial gyres was 188. In particular, the microfilament structures existed in plasma membrane of the sperm, which was adjacent to the acrosomal region on the nuclear membrane. The segmented columns were surrounded by microfilament structures, and the microfilament bundles were adjacent to the outer membrane of the first mitochondria of middle piece. This study presents for the first time the existence of microfilament structures within the plasma membrane of sperm which is located from the adjacent acrosome region to the connecting piece in sperm neck of Korean striped field mouse, Apodemus agrarius coreae. The present result suggests that the constriction and extension of microfilament in sperm neck as well as the wave-movement of sperm tail may play a role in the movement of sperm head.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.663-664
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2016

For reaction injection molding (RIM) polyurethane was mixed in the mixing head by impingement mixing, injected into the mold, and cured quickly, as soon as the mold is filled. The shape of the nozzle in the mixing head is critical to improve the quality of polyurethane. To achieve homogeneous mixing, an intensive turbulence energy in the mixing nozzle is essential. In this study, a mixing nozzle for RIM was designed, and mixing efficiency was investigated based on experiment. Experiments were conducted with different combinations of nozzle tips and exit diameter to measure the mixing efficiency by measuring jet force and investigating mixing image with high speed camera. Jet force increased gradually and reaches steady state conditions. The jet force depended on shape of nozzle tip and outlet sizes. These results suggest that optimized nozzle configurations are necessary for high efficiency mixing with RIM.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.3
• /
• pp.33-40
• /
• 2019

Woolyang(月梁) is a beam which whole shape is curved like a so-called moon(月). According to the ${\ll}$Yeongjobeosig(營造法式)${\gg}$, In the case of beams installed under the ceiling of a wooden building, it is used by manufacturing them in Woolyang(月梁) for maximum visual decorative effects as the shape is exposed. In order to achieve the end of a beam that is manufacturing in Woolyang(月梁), it is important to process it in a suitable size and shape for a given situation to achieve a combination with other members around it. However, in the "營造法式", the standard of production of the Woolyang(月梁) is divided into Myeongbog(明?), Chagyeon(箚牽), Pyeonglyang(平梁), and the height of each beam head is divided into 21分$^{\circ}$, 15分$^{\circ}$, 25分$^{\circ}$, but it is not possible to look at any more specific reference. In this paper, try to consider the principle of Woolyang(月梁) manufacturing and its normative contents which were indirectly proposed in the ${\ll}$Yeongjobeosig(營造法式)${\gg}$.

• Journal of Magnetics
• /
• v.5 no.2
• /
• pp.55-58
• /
• 2000

Local magnetic properties and magnetization distributions on the air-bearing surface of a thin-film magnetic head have been studied by using scanning magneto-optical Kerr microscopy. The examined head was a merged MR read/inductive writing head with a write gap equal to 0.3 $\mu m$. Sizes of top and bottom pole-tips on the air-bearing surface of the writing head were equal to $3\mu m\times3\mu m$ and $3\mu m\times30\mu m$, respectively, The measured magnetic characteristics on the head air-bearing surface were found to be very sensitive to the head design. In particular, magnetization distributions were discovered to have asymmetrical shape. Maximum magnitudes of the magnetization were located near the shorten pole-tip. So, it was experimentally proved that more magnetic flux emanates just from this part of the air-bearing head surface.