• Journal of Korean Society of Forest Science
• /
• v.58 no.1
• /
• pp.27-33
• /
• 1982

Genetic variance and heritability for height growth of Populus alba${\times}$ P. glandulosa were estimated. Remarkable different between P. alba${\times}$ alba(Italy), female and P. alba naturalized in Korea was observed in the genetic variance and therefore genetic character of the P. alba${\times}$ alba(Italy) was considered better than that of P. alba. The heritability (83%) for the female was considerably high. On the other hand, P. glandulosa, pollen tree. showed narrow genetic variance and also very heritability(17%). Two(A and B) of three pollen trees showed the same trend in the genetric variance. However, the other(c) was somewhat different from A and B. Similarly, rooting ability of cuttings differed between female trees, but did not between male trees. Naturalized Pl alba showed relatively higher rooting ability than P. alba${\times}$ alba(Italy). In the pollen trees, the ability was similar in two male trees. However, the other male tree(c) was slightly poorer than the other two.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• Parasites, Hosts and Diseases
• /
• v.34 no.1
• /
• pp.49-58
• /
• 1996

Characterization of a purified proteinase from T4chomoncs uoginalis was carried out using bacitracin-sepharose affinity chromatography. Trichomonos uqginolis KT-9 isolate was used as a source of eye study Proteinase activity was determined using Bz-Pro- Phe-Arg-Nan as the substrate. Optimum pH for the purified proteinase activity was 7.0 and 6.0, 9.0 with DTT. Optimum temperature was 37℃ and isoelectric point was 7.2 Activity of this proteinase was inhibited by E-64, antipain, leupeptin, Hg2+ and Zn2+ and activated by DTT and cysteine. Activity of the purified proteinase was visualized by gelatin SDS- PAGE. The gelatinolytic activity of the purified proteinase was inhibited by E-64, antipain, leupeptin, and IAA, but not by PMSF and EDTA. On SDS-PAGE, the molecular weight of the purified proteinase was 60,000 daltons. Sera of rabbits infected with T. vaginalis reacted specifically in immunoblots with this proteinase. These results indicate that 60 kDa of purified proteinase was cysteine proteinase with antigenicity.

• Journal of Ginseng Research
• /
• v.20 no.4
• /
• pp.501-519
• /
• 1996

There are two kinds of commercially available ginseng root, red ginseng and white ginseng processed from fresh ginseng root Those ginsengs are primary product from fresh ginseng root and have the characteristic of keeping their original root shape Processed ginseng products are made from either red ginseng or white ginseng by way of complicated process of pulverization. Extraction. Condensation, fettering, sterilization, etc. Among them there are extracts. extract powder, powder, capsules tablets, Candy, drinks, nectar, jelly, gums. chicken soup. tonic. etc. to meet the demand for consumer's pretheronce . The 200 kinds of processed secondary products are approximately produced in the form of 20 kinds of ginseng products by about 60 domestic companies. In spite of about 213.000 million won of domestic market in 1993. it seems like that the ginseng market of the future has not a good prospects The total market sale of white ginseng in Korea has been continuously decreased since 1991 And 963 tons of white ginseng was consumed in domestic market in 1993 The domestic market sales of white ginseng in origina1 root shave. was 90, 000 million won in 1993 and market price of the fine root used as a source of processed products has not been changed in these ten years. The total market sale of red ginseng and its processed products was 58, 000 million won in 1993 9.800 mi11ion won of red ginseng in original root shape and 48.000mi11ion of processed red ginseng product. Ginseng products such as extracts, drinks, teas and tonics etc atre mostly exported to south-east Asia. And the total exports of ginseng pi.oducts (extracts, drinks teas) decreased to 54 million dollars in 1994, compared with 85 million dollars in 1992. Despite of extensive knowledge about ginseng little is still known about the development of new processed ginseng pl.oducts because of "Know-How". Some papars have presented the effects of extracting method(amounts of solvent. time. temperature, equipment. etc.) on the quality and yields of ginseng extr acts. Also. some researchers have carried out a few studies on the poriflcation of the extracts and the amounts of precipitation in the drink at variotas pH during the storage for preventinly drink from precipitation. A fell studies on the preservation of Korean ginseng powder. tea. Extract powder by irradiation and ozone treatment have been reported by some researcher for the improvement hygienic quality of ginseng products There are also some reports about the effects of ginseng components on the acid production by lactic acid bacteria or acetic acid bacteria. and alcohol production by yeast for the development of new ginseng products processed by fermentation. To make ginseng more able to contribute to the health of mankind in the future. consistent and considerable efforts should be focussed on improving the taste of ginseng and developing various new product as a health food or a function food.tion food.

• Korean Journal of Microbiology
• /
• v.31 no.1
• /
• pp.72-78
• /
• 1993

Since the 'promoter/enhancer region of the major immediate early (IE) ~ene of human cytomegalovirus (HCMV) contains the cyclic AMP (cAMP) response element (CRE) consensus sequence, it was reasonable to hypothesize that cAMP might affect HCMV replication. Cyclic AMP modulating drugs such as 8-bromoadenosine 3',5'-cyclic monophosphate (BrA), and papaverine were used to affect the intracellular levels of cAMP, and the effects of the drugs on HCMV replication were studied. While papaverine effectively inhibited HCMV multiplication and DNA synthesis, BrA exerted little effect on the production of infectious HCMV yields. The synthesis of DNA in HCMV-infected cells appeared to be stimulated by BrA In order to understand the effect of cAMP on the expression of HCMV major IE gene, plasmid (pCMVIE/CAT) containing a reporter gene driven by HCMV IE promoter was transfected into either permissive human embryo lung (HEL) cells or nonpermissive cells. PL,Javerine, which has been reported to block the HCMV-induced increase in cAMP, reduced the expression of pCMVIE/CA T in permissive HEL cells. Treatment of transfected cells with BrA increased the expression of HCMV major IE promoter not only in HEL cells, but also in nonpermissive HeLa and Vero cells. Therefore, it seems that the expression of HCMV major IE gene is regulated by cAMP.

• Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.189-194
• /
• 2005

Protein, lipid classes, and fatty acid composition, including n-3 highly unsaturated fatty acids (HUFAs), were analyzed in the soft parts, which we differentiated as the adductor muscles and 'other portions,' from the cultured pearl oyster after the pearl was harvested and before the nucleus was grafted to evaluate the nutritional qualities of the soft parts. Total lipid content was higher in the other portions of the soft parts ($1.25-1.26\%$) than in the adductor muscles ($0.58­0.65\%$) in both pearl oyster samples, whereas protein content was higher in the latter ($15.5­18.7\%$) than in the former ($11.2-13.9\%$; P<0.05). The percentage of total lipids (TLs) consisting of phospholipids (PLs) was higher in the adductor muscles ($60.4-68.3\%$) than in the other portions ($40.6-47.0\%$), but the percentage of nonpolar lipids (NLs) was higher in the other portions of the soft parts. The prominent lipid classes were free sterol (FS) and triglyceride (TG) in the NLs and phosphatidylcholine and phosphatidylethanolamine in the PLs. The adductor muscles contained high levels of FS and all PL classes, while the other portions contained high levels of all NL classes, especially TG (but not FS; P<0.05). The prominent fatty acids were 22:6n-3 ($17.2-24.9\%$), 16:0 ($8.35-15.8\%$), 20:5n-3 ($7.95-14.9\%$), 18:0 dimethyl acetal (DMA, $4.79-13.5\%$), 18:0 ($4.50-6.16\%$), and 20:4n-6 ($4.36-5.43\%$). The percentages of 22:6n-3, 20:4n-6, and 18:0 DMA were higher in the adductor muscles than in the other portions of both pearl oyster samples, while those of 20:5n-3 and 16:0 were higher in the other portions (P<0.05). The levels of these food components were similar to those of other bivalves or were higher, especially the protein content, indicating that the soft parts of pearl oysters, which are currently wasted, have food value.

• Proceedings of the Ginseng society Conference
• /
• 1998.06a
• /
• pp.231-243
• /
• 1998

In the present study, we provide evidence that ginsenoside $Rh_2$ (G-$Rh_2$) as well as staurosporine induces apoptosis of human hepatoma SK-HEP-1 cells by caspase 3-mediated processing of $p21^{WAFI/CIPI}$ in the early stage of apoptosls. Immunoblottings showed that G-$Rh_2$ as well as statrosporine induced the processing of caspase-3 to an active form, pl7. In stable Bcl-2 transfectants however, G-$Rh_2$ induced DNA fragmentation, while staurosporine did not. In the early stage of apoptosis, $p21^{WAFI/CIPI}$ was detected to undergo proteolytic processing specifically conducted by caspase-3. $p21^{WAFI/CIPI}$ translated in vitro was cleaved into a p14 fragment, when incubated with cell extracts obtained from either G-$Rh_2$- or staurosporine-treated cells. Cleavage was equally inhibited in both cases by adding Ac-DEVD-cho, a specific caspase-3 inhibitor, but not by Ac-YVkD-cho, a specific caspase-l inhibitor. Similarly, $p21^{WAFI/CIPI}$ was efficiently leaved by recombinant caspase-3 overexpressed in E. coli. Moreover, the endogenous $p21^{WAFI/CIPI}$ of untreated-cell extracts was also cleaved by recombinant caspase-3. Mutation analysis allowed identification of two caspase-3 cleavage sites, $DHVD^{112}$/L and $SMTD^{149}$/F, which are located within, or near the interaction domains for cyclins, Cdks, and PCNA. Taken together, these results show that G-$Rh_2$ as well as staurosporine increases caspase-3 activity, which in turn directly cleaves $p21^{WAFI/CIPI}$ resulting in elevation of Cdk kinase activity in the early stages of apoptosis. We propose that proteolytic cleavage of $p21^{WAFI/CIPI}$ is a functionally relevant event that allows unleashing the cyclin/Cdk activity from the inhibitor seen in the earlier stage of apoptosis, the event of which may be associated with the triggering mechanism for the execution of apoptosis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.164-167
• /
• 2010

Bulk GaN single crystal with 1.5 mm thickness was successfully grown by hydride vapor phase epitaxy (HVPE) technique. Free-standing GaN substrates of $10{\times}10,\;15{\times}15$ mm size were fabricate after lift-off of sapphire substrate and their optical properties were characterized properties for device applications. X-ray diffraction patterns showed (002) and (004) peak, and the FWHM of the X-ray rocking curve (XRC) measurement in (002) was 98 arcsec. A sharp photoluminescence spectrum at 363 nm was observed and defect spectrum at visible range was not detected. The hexagonal-shaped etch-pits are formed on the GaN surface in $200^{\circ}C\;H_3PO_4$ at 5 minutes. The defect density calculated from observed etch-pits on surface was around $5{\times}10^6/cm^2$. This indicates that the fabricated GaN substrates can be used for applications in the field of optodevice, and high power electronics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.11-17
• /
• 2000

We investigated the growth of InGaN/GaN multiple quantum wells (MQWs) structures which emit blue light. The samples were grown in a low pressure metalorganic chemical vapor deposition system. We examined InGaN/GaN MQWs by varying growth temperatures and thicknesses of InGaN well and GaN barrier layers in MQWs. Especially, the thickness of GaN barrier in InGaN/GaN MQWs was found to severely affect the interfacial abruptness between InGaN well and GaN barrier layers. The higher order satellite peaks in the high resolution x-ray diffraction spectra and the high resolution cross sectional transmission electron microscope image of MQW structrues revealed that the interface between InGaN and GaN layers was very abrupt. Room-temperature photoluminescence spectra also showed a blue emission from InGaN/GaN MQWs at the wavelength of 463.5nm with a narrow full width at half maximum of 72.6meV.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.281-286
• /
• 2010

Thickness effects on the structural and optical properties of ZnO thin films fabricated by spin coating method have been carried out. With increase in the thickness of the ZnO thin films, the width and density of striation shape are increased. The ZnO thin film with thickness of 450 nm has a smooth surface morphology. For the ZnO thin film with a smooth surface, orientation factor ${\alpha}_{(002)}$ is sharply increased and FWHM of (002) diffraction peak is decreased compared to the ZnO thin films with a striation shape surface. Thickness and surface morphology of the ZnO thin films hardly affect the NBE peak position. However, the DLE peak position is blue-shifted as the surface morphology is changed from striation to smooth surface. The PL intensity ratio of the NBE to DLE is increased and the FWHM of NBE peak is decreased as the thickness of the ZnO thin films is increased.