PURPOSES : The purpose of this study is to evaluate the mechanical properties of a cold-recycling asphalt mixture used as a base layer and to determine the optimum emulsified-asphalt content for ensuring the mixture's performance. METHODS : The physical properties (storage stability, mixability, and workability) of three types of asphalt emulsion (CMS-1h, CSS-1h, and CSS-1hp) were evaluated using the rotational viscosity test. Asphalt emulsion residues, prepared according to the ASTM D 7497-09 standard, were evaluated for their rheological properties, including the $G*/sin{\delta}$and the dynamic shear modulus (${\mid}G*{\mid}$). In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were evaluated for the cold-recycling asphalt mixtures fabricated according to the type and contents of the emulsified asphalt. RESULTS : The CSS-1hp was found to be superior to the other two types in terms of storage stability, mixability, and workability, and its $G*/sin{\delta}$ value at high temperatures was higher than that of the other two types. From the dynamic shear modulus test, the CSS-1hp was also found to be superior to the other two types, with respect to low-temperature cracking and rutting resistance. The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt content. However, the mixtures with one-percent emulsified-asphalt content did not meet the national specification in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). CONCLUSIONS : The emulsified-asphalt performance varied greatly, depending on the type of base material and modifying additives; therefore, it is considered that this will have a great effect on the performance of the cold-recycling asphalt pavement. As the emulsified-asphalt content increased, the strength change was significant. Therefore, it is desirable to apply the strength properties as a factor for determining the optimum emulsified-asphalt content in the mix design. The 1% emulsified-asphalt content did not satisfy the strength and aggregate coverage criteria suggested by national standards. Therefore, the minimum emulsified-asphalt content should be specified to secure the performance.
PURPOSES : This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS : First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS : After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at $60^{\circ}C$ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).
PURPOSES : The purpose of this study is to analyze the characteristics of the weight values of evaluation items by traffic safety project type. METHODS : In general, a large-scale investment in projects such as the traffic safety project requires economic analyses to be performed in advance. However, there is an argument for considering special characteristics of the traffic safety project. Therefore, this study conducted characteristic analysis of the weight values of evaluation items. The analysis consisted of two steps. The first step was hypothesis verification using analysis of variance (ANOVA). In this process, the authors examined whether the weight of evaluation items is the same regardless of the traffic safety project type. Based on the first step's results, the authors proceeded to the second step. The objective of this step was to analyze how different the weight values are by traffic safety project type using an analytic hierarchy process. RESULTS : According to the ANOVA test results, the benefit to cost ratios have different weight values based on traffic safety project type at the 0.01 significance level. The policy evaluation items, such as the plans connection, resident opinion, and regional equity, also showed the same results except that the result for the related plans connection was statistically significant at the 0.05 level. Based on the first step's result, the AHP analysis in the second step showed that the traffic safety projects for vulnerable users and pedestrians have very low weight values in economic evaluation factors compared with other safety project types. The weight values for vulnerable users and pedestrians were 0.29 and 0.26, respectively, in economic evaluation items. On the other hand, the weight values for other safety project types were around 0.6. Among the policy evaluation items, resident opinion showed a higher weight value than other factors, such as connection and regional equity items. CONCLUSIONS : The social and economic impact of a traffic safety project varies by project type and project characteristics. Although the economic approach is overarching and a reasonable methodology is applied for large-scale projects, it should be noted that the safety issue, especially for transportation of vulnerable uses, requires a non-economical approach. Based on the analysis results, this study suggests that the priority of the projects should be determined by separating them into independent assessment groups depending on their characteristics.
본 연구는 하부 절곡강판과 T형강을 D16mm 스터드 전단연결재를 이용하여 콘크리트와 일체화시킨 교량용 강합성 바닥판의 피로 거동 및 피로성능을 평가하기 위한 것이다. 제안된 강합성 바닥판의 피로성능 평가를 위하여 총 8본의 시험체가 제작되었으며, 각각의 시험체에 3 종류의 일정진폭을 가진 피로하중이 재하되었다. 피로실험결과, 피로균열은 강합성 바닥판 하부 절곡강판의 절곡점에서 발생하여 상부 T형강으로 진전되는 것으로 나타났으며, 피로하중에 따라 시험체의 변위 및 변형률이 증가하고 피로균열발생 후 변위와 변형률이 급격히 변화하였다. 제안된 강합성 바닥판의 피로강도는 도로교설계기준 및 도로교설계기준 피로상세 범주의 자료가 된 NCHRP 102와 NCHRP 147 보고서의 피로실험결 과와 비교하여 평가한 결과 대상 강합성 바닥판은 피로상세 범주 C에 해당하는 것으로 평가되었다.
본 연구는 자전거 좌회전 교통류를 수용한 신호교차로 운영방안으로 Bike Box, Hook-turn, 그리고 6현시의 3가지 방식을 다양한 교통상황 및 조건하에서 평가하였다. 분석결과, Bike Box방식과 Hook-turn 방식 모두 대기공간의 크기가 신호운영 결과에 큰 영향을 미치는 것으로 파악되었다. 비포화와 근포화 교통상황에서 Hook-turn과 Bike Box방식은 자동차지체 차이는 거의 없으나 자전거 지체는 Hook-turn이 Bike Box 방식에 비해 2.5-29.9초/대 높게 나타났다. 6현시 방식은 Bike Box 방식에 비해 자동차와 자전거 지체가 모두 매우 크게 나타났다. 포화 교통상황에서는 Bike Box방식이 Hook-turn과 6현시운영에 비해 자동차지체는 작게 나타났으나, 자전거지체는 자전거 교통량이 700대/시에서 6현시 방식보다 오히려 증가하였다. 자전거지체는 Hook-turn방식은 자전거교통량이 300대/시 이후, Bike Box방식은 500대/시 이후부터 지체가 급격하게 증가하였다. 그리고 Bike Box와 Hook-turn 방식 모두 대기공간이 증가시 자전거 지체가 매우 큰 폭으로 감소하였다. 또한 동-서 및 북-서 교통량 패턴 모두 Bike Box가 Hook-turn 방식보다 자동차와 자전거 지체가 작게 나타났다.
국내에서의 도로설계 안전성 평가는 도로설계 전문가의 설계도면 검토, 현장방문을 통한 자문자료를 통하여 이루어져왔다. 이러한 설계 안전성 평가는 전문가의 판단을 뒷받침 할 수 있는 객관적인 근거가 부족하다는 문제점과 안전측 편익을 계산하기 위한 수치적인 결과가 부족하다는 문제점이 있다. 본 연구에서는 이러한 문제점을 개선 보완할 수 있는 도로설계 안전성 평가 시스템을 개발하기 위해 IHSDM의 국내도로 적용성 평가, 잠재적 사용자 요구분석을 수행하였다. IHSDM의 사고예측모듈에서 안전성을 평가하기 위해 도로구간별 사고빈도 및 사고율을 산정하는 방법론과 도로의 특성을 반영할 수 있도록 하고 있는 AMF의 개발은 기존의 사고예측모형을 통한 사고예측이나 전문가 판단을 통한 안전성 평가의 한계점을 보완하고 있다. 그러나 이 같은 장점에도 불구하고 국내도로의 IHSDM 적용성 평가 결과 국내도로의 사고를 과대 예측하는 경향을 보여 국내도로의 사고특성을 반영하지 못하는 것으로 나타났다. IHSDM이 반영하지 못하는 대표적 지방부 국내도로 특성으로는 도로변 토지이용도와 미국과는 상이한 지방부 도로의 교통량특성인 것으로 나타났다. 또한, 사용자 요구분석을 통해서는 데이터 입력방식과 도출된 결과를 제시하는 방법의 다양성과 편의성이 확보가 중요시 되는 것으로 분석되었다.
본 연구는 도로용 포장재로서 포러스콘크리트의 실질적인 현장적용을 위한 자료제시와 성능향상 방안을 도출하기 위하여 실리카퓸과 강섬유 혼입률에 따른 포장용 포러스콘크리트의 물리 역학적 특성, 내구성 및 흡음특성을 평가하였다. 시험결과, 모든 시험조건에서 포장용 포러스콘크리트의 공극률과 투수계수는 국내외 기준치 및 제안값을 만족시키는 것으로 나타났고, 강도특성의 경우 압축강도는 대한주택공사 도로기준의 기준치를 모든 배합요인에서 만족시키는 것으로 나타났으나 휨강도의 경우에는 강섬유 혼입률 0.6vol% 이상에서 일본콘크리트공학협회 제안값을 만족시키는 것으로 나타났으며, 실리카퓸과 강섬유를 동시에 혼입한 경우가 우수한 강도특성을 나타냈다. 또한 내구성은 역학적 특성과 유사한 경향성을 나타내 실리카퓸과 강섬유를 동시에 사용한 경우가 가장 우수한 내구성능을 나타냈으며, 실리카퓸 10wt.%와 각섬유 0.6vol.%를 함께 사용한 경우 Plain의 경우에 비해 골재비산저항성은 27%정도, 동결응해저항성은 약 60%정도 개선되는 것으로 나타났다. 또한 포장용 포러스콘크리트의 흡음특성은 소음저감계수가 0.48로 나타나 50%에 가까운 흡음성능을 발휘하는 것을 확인할 수 있었다.
PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.
중앙선 침범 관련 사고는 다른 사고에 비해 사고빈도는 낮지만 치명적인 사고로 이어질 가능성이 높기 때문에 이에 대한 적절한 사고감소대책이 필요하다. 중앙선 침범을 방지하는 대표적인 도로안전시설물이라 할 수 있는 중앙분리대는 도로의 안전 확보에 중요한 역할을 하며, 실제 그 효과에 대한 구체적인 분석을 통하여 향후 중앙분리대의 적극적인 활용을 도모하는 것을 연구의 목적으로 하고 있다. 따라서 본 연구에서는 중앙분리대의 형식, 성능 등에 대한 검토에 앞서 기본적으로 중앙분리대의 설치와 교통사고와의 관계를 분석해 보았다. 즉, 중앙분리대의 사고감소효과를 파악하기 위해 우리나라 4차로 이상의 일반국도를 대상으로 중앙분리대 설치 여부에 따른 사고자료를 비교하였다. 보다 체계적이고 효과적인 분석을 위해 총 사고뿐만 아니라 유형별·사고강도별·시간대별 사고를 비교하였으며, 다양한 효과척도(사고율. 사고점유율. EPDO)를 이용하여 사고빈도뿐만 아니라 사고강도까지 비교하였다. 지점별·구간별 사고분석 및 중앙분리대 신설지점에 대한 효과분석 결과 중앙분리대의 설치는 사고빈도와 함께 사고강도를 낮춤으로써 확실한 사고감소효과를 가져왔으며, 특히 정면충돌사고, 사망사고, 야간사고에 대한 사고감소효과가 크게 나타났다. 따라서 정면충돌사고. 사망사고, 야간사고가 빈번히 발생하는 도로구간(특히 단일로나 접속로의 경우)에 대한 중앙분리대의 설치는 교통사고 감소를 위한 중요한 대책이 될 수 있다. 이러한 연구를 통해 중앙분리대 설치에 따른 사고감소효과를 명확히 밝힘으로써 중앙분리대 설치의 당위성을 제공할 수 있을 뿐 만 아니라 향후 보다 효과적이고 합리적인 중앙분리대 설치구간 선정에 도움을 줄 것으로 사료된다.
VMS의 운영적인 제공 목표는 운전자들의 경로선택을 통한 효율적인 시스템을 운영하는 것이다. VMS 정보 제공문제를 포함한 교통문제들은 게임이론을 통해 모형화 될 수 있지만 대다수의 연구들은 게임이론을 통하여 동일한 정보를 제공받더라도 운전자의 반응이 다양하게 나타나는 점을 반영하지 못하였다. 본 연구는 VMS교통정보에 대한 운전자들의 정보에 대한 반응을 진화적 게임모형을 활용하여 분석하고자 하였다. 실제 소통정보 및 VMS 정보 제공이력을 기초로 VMS정보에 따른 운전자들의 행동특성을 진화 게임이론에 적용해보았다. 분석결과 운전자들의 경로선택 비율은 VMS정보를 통한 기대통행시간과 진입교통량에 따라 달라지는 보수에 의해 결정되었다. VMS 정보는 진화적 게임의 보수에 영향을 미친다. 운전자들이 최초 어떠한 비율로 경로를 선택하더라도, 주기가 지남에 따라 진화적으로 안정한 상태로 수렴될 수 있는 것을 확인하였다. 또한 VMS정보가 과도한 통행시간이나 과소 통행시간을 제공할 경우 진화적으로 안정화되지 못하여 혼란이 가중될 수 있는 것으로 분석되었다. 결론적으로 교통문제와 같이 다른 운전자의 전략을 정확히 예측할 수 없고, 운전자 집단 간의 반복, 경험에 의해 합리적인 정보판단을 수행하는 경우, 진화 게임이론을 통해 전략적인 VMS 정보를 제공할 수 있을 것이라 기대할 수 있을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.