• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.105-116
• /
• 2017

In recent years, large Korean construction companies have suffered serious losses in their overseas business. Many practitioners and researchers have analyzed causes of cost overrun in these projects. However, these arguments have not been empirically verified based on acutal project cases. This study investigated cost overrun rate, contingency, allowance, predicted risk before bidding, and actual and residual risk after award in the 67 international infrastructure projects conducted by 13 large construction companies. The causes of cost overruns are derived as follows. First, they identified the possibility of cost overrun to some extent before the bidding, but did not reflect the enough risk money to bid price. In particular, this behavior was more severe in badly cost-overrun projects. Second, the causes of cost overrun were more influenced by external environmental risk than internal capability risk. However, the internal risk in badly cost-overrun projects was relatively high compared to cost-underrun projects. Third, badly cost-overrun projects failed to mitigate risk. However, cost underrun projects were affected more by low exterior risk conditions than by well mitigated risk. This study provides more informed knowledge in controlling project costs in international infrastructure projects.

• Structural Engineering and Mechanics
• /
• v.31 no.2
• /
• pp.181-210
• /
• 2009

This paper presents the theoretical developments of an exact finite strip for the buckling and initial post-buckling analyses of isotropic flat plates. The so-called exact finite strip is assumed to be simply supported out-of-plane at the loaded ends. The strip is developed based on the concept that it is effectively a plate. The present method, which is designated by the name Full-analytical Finite Strip Method in this paper, provides an efficient and extremely accurate buckling solution. In the development process, the Von-Karman's equilibrium equation is solved exactly to obtain the buckling loads and the corresponding form of out-of-plane buckling deflection modes. The investigation of thin flat plate buckling behavior is then extended to an initial post-buckling study with the assumption that the deflected form immediately after the buckling is the same as that obtained for the buckling. It is noted that in the present method, only one of the calculated out-of-plane buckling deflection modes, corresponding to the lowest buckling load, i.e., the first mode is used for the initial post-buckling study. Thus, the postbuckling study is effectively a single-term analysis, which is attempted by utilizing the so-called semi-energy method. In this method, the Von-Karman's compatibility equation governing the behavior of isotropic flat plates is used together with a consideration of the total strain energy of the plate. Through the solution of the compatibility equation, the in-plane displacement functions which are themselves related to the Airy stress function are developed in terms of the unknown coefficient in the assumed out-of-plane deflection function. These in-plane and out-of-plane deflected functions are then substituted in the total strain energy expressions and the theorem of minimum total potential energy is applied to solve for the unknown coefficient. The developed method is subsequently applied to analyze the initial postbuckling behavior of some representative thin flat plates for which the results are also obtained through the application of a semi-analytical finite strip method. Through the comparison of the results and the appropriate discussion, the knowledge of the level of capability of the developed method is significantly promoted.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.72-91
• /
• 2015

This study is aimed at researching and analyzing the actual conditions of the curriculum and career path of chemical engineering field in specialized high school, and seeking for a curriculum improvement plan for activation by means of identity establishment of chemical engineering field. This study surveyed the actual conditions of school (department) regarding chemical engineering, and analyzed an adequacy among the curriculum, department name and acquired license. The results are as follows. Firstly, In order to the chemical engineering field to maintain the identity of chemical engineering and accept the changes in the industrial site, it is desirable for the department name to use the name of applied science, such as Applied Chemical Industry, Nano Chemical Industry, Environmental Chemical Industry, Energy Chemical Industry, Convergence Materials Science and Chemical Engineering, Ceramic Chemical Engineering, Biomolecular and Chemical Engineering, and Food Bio-chemical Engineering, which are derived from chemical engineering, and the revision of curriculum should be included. Secondly, it is necessary to diversify relevant licenses by standard department of chemical engineering field, and clarify the purpose of human resources development and the image of talented, considering the future course of graduates and the demand of industry, for the purpose of improving school-leveled curriculum to raise the possibility of employment. Thirdly, in accordance with the changing paradigm that secondary vocational education is changed from 'just-to-know education (knowledge)' to 'can-do education (capability)', it is necessary to make the performance ability-centered curriculum in which 'chemical engineering industry - chemical engineering vocational education - chemical engineering qualification' are integrated.

• Journal of the Korean association of regional geographers
• /
• v.12 no.3
• /
• pp.364-381
• /
• 2006

Strategies for regional development has been implemented by facilitating the cultural industry since the mid 1990s. The government of Gyeongbuk attempted to establish the cluster of cultural industries and to enhance the capability of cultural industries. However, infrastructure of the industries is still weak. The most cultural industries are small-sized enterprises and are in low value-added production link in the value chain. This research examines the situation of cultural industries and then to recommend the direction of cluster of cultural industries in Gyeongbuk. The cluster of cultural industries in Gyeongbuk needs to be decentralized integration. Cultural industries in Gyeongbuk are found in dispersed regions with own cultural and industrial characteristics. The hub of cluster of cultural industries should be formulated to promote network among cultural industrial complexes in dispersed regions; thus, the hub is able to provide knowledge and information for the cultural industrial firms in Gyeongbuk. The supporting center as the hub of cluster has to input more energy to establish the on-line and off-line network among firms, and between firms and innovation agencies such as universities, cultural industrial organizations, and local governments. The cultural industrial cluster should be linked with IT cluster in Gumi and cluster of Daegu cultural industries to upgrade the value chain of cultural industries.

• Korean Journal of Oriental Medicine
• /
• v.17 no.2
• /
• pp.63-71
• /
• 2011

Objectives : We studied the ISP(information strategy plan) of oasis spanning 5 years. From this study we aimed at total road map to upgrade the service systematically and to carry out the related projects. If we do it as road map, oasis will be the core infra service contributing to the improvement of TKM(traditional korean medicine) research capability. Methods : We carried out 3 step ISP method composed of environmental analysis, current status analysis and future plan. We used paper, report and trend analysis document as base materials and did the survey to get opinions from users and TKM experts. We limited this study to drawing the conceptual design of oasis. Results : From environmental analysis we knew that China and USA built up the largest TM databases. We did the survey to get the activation ways of oasis. And we did the benchmarking on the advanced services through current status analysis. Finally we determined 'maximize the research value based the open TKM knowledge infra' as oasis' vision. And we designed oasis' future system which is composed of service layer, application layer and contents layer. Conclusion : First TKM related documents, research materials, researcher information and standards are merged to elevate the TKM information level. Concretely large scale TKM information infra project such as TKM information classification code development, TKM library network building and CAM research information offering are carried out at the same time.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.96-104
• /
• 2019

Recently, projects are being actively promoted to develop a new residential district centered around the metropolitan area, or to redevelop the residential area that was established long ago as unplanned land development. In this residential area, the owner can directly construct the building, and the way the building owner builds the residential house is called the direct construction of the owner. If the owner has the construction management (CM) capability while conducting direct management of the owner, the direct construction can be carried out by the CM method. This type of construction is called Owner-CM delivery method. However, it is very rare for small-scale construction in Korea to be implemented by the Owner-CM method. This may be due to the lack of knowledge and experience about the CM of the owner. In this study, we investigated the actual cases of the scheduling for the residential houses of similar size which were built at the same time in the residential housing complex developed near the metropolitan area. The purpose of this study is to derive the success factors of the scheduling in the small-scale construction from the cases carried out by the Owner-CM method. These success factors of the scheduling can be used as meaningful reference for the owners who want to build their own house in the future.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.114-140
• /
• 2019

The purpose of this research is to analyze a principal's job at a Vocational High School using DACUM Task Analysis Method. The contents of this research are to set the order after deriving the duties and tasks of the principal., then to verify as the importance, difficulty, and frequency of each task, and also to indicate whether it is an essential capability to have in the early stages of one's duty. Finally, based on the job analysis results, a DACUM chart was developed by the principal of the Vocational High School. The DACUM Task Analysis Workshop was attended by one DACUM analyst with LEVEL - 1 license, seven DACUM members with more than four years experience, one secretary and two administrative assistants for a two-day period. The results of the research are as follows; First, the Vocational High School Principal is defined as a school administrator who operate the vocational education curriculum of in the specialized and customized high schools of industrial demand development and the job area. The analysis derived 11 duties and 95 tasks of the Principal. Second, the importance, difficulties, and frequency of each task were divided respectively into high (A), moderate (B), and low (C), and the consensus of the experts was made to determine whether the core capabilities are acquired early on the job. Third, based on the analysis results, a DACUM Task Analysis chart of the Vocational High School principals was presented. In addition, while engaged on the job of the vocational high school principal, a list of 49 general knowledge and abilities, 16 tools, Integrated data and fixtures are required. Along with 28 attitudes 33 future prospects and characteristics of the Vocational High School principal was presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.413-422
• /
• 2019

Maritime accidents are always accompanied by human/property damages. If management level ship's of icers properly respond to emergency situation in a correct manner based on knowledge required by international conventions, when maritime accidents occur, it will be possible to minimize such human/property damages. To improve the ability to deal with maritime accidents, this study analyze maritime accident cases to identify which competencies ships' officers' were lacking, compared the emergency response competencies required by international conventions, analyzed various emergency management manuals of shipping companies and carried out questionnaire surveys to suggest improvements of emergency response capability for ship's master. Through the analysis of maritime accidents, it was identified that management level ship's officers lacked competencies regarding damage stability and intact stability, and that the training for emergency response required by international conventions had been insuf iciently carried out. In addition, even though emergency management manuals of ships were generally adequate, it has been identified that there were limitations in terms of practical use of emergency response manual. Therefore, based on the questionnaire, this study proposed the expansion of emergency response training required by international conventions based on use of simulators, and the development of guidelines or manuals for effective and efficient response in emergency situations.

• Management & Information Systems Review
• /
• v.38 no.2
• /
• pp.119-137
• /
• 2019

This paper analyzes the factors affecting the relationship characteristics of firms and public research institutes, in-addition to analyzing the effect of relationship characteristics with the industry-public research institute cooperation. We selected factors influencing relationship characteristics of firms and public research institutes based on the study of existing industry-university-institute cooperation. These factors include the willingness of the industry-public research institute cooperation, firm's R&D capabilities, and the firm's perceived public research institutes competence. The relationship between these factors, their relationship characteristics, and the performance of the industry-public research institute cooperation was studied using six hypotheses. In order to test this research model, we conducted a survey on industry-public research institute cooperation firms and received responses from 116 companies. Partial Least Square-Multi Group Analysis (PLS-MGA) was used to test the research model. The results of the empirical analysis show the following results. First, the willingness of the industry-public research institute cooperation, firm's R&D capabilities and firm's perceived public research institutes competence have a positive impact on the relationship characteristics of firms and public research institutes. Second, the relationship characteristics of firms and public research institutes have a positive impact on firm performance in the industry-public research institute cooperation. Third, firm's R&D capabilities and firm's perceived public research institutes competence directly affect firm performance in the industry-public research institute cooperation. These results provide policy and practical implications for enhancing firm performance of the industry-public research institute cooperation.