• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.830-837
• /
• 2010

Since it started the researches on a maglev train on 1960, Germany and Japan arrived to putting to practical use level and accomplished most tests from their test-line. Korea is in progress the preparation for a practical use of low-speed maglev train in 110 [km/h] class and Korea Railroad Research Institute(KRRI) is in progress of a research about core technology of maglev system for high-speed tube train of 700 [km/h] class. In this paper, authors suggest an effective design method of Linear Synchronous Motor(LSM) for high-speed tube train of 700 [km/h] class which has a wound type electro-magnet. Then, authors calculate a variety of properties by changing speed of the LSM model which is designed by a method based on some theoretical equations. Then, authors verify the validity of the method based on some theoretical equations through a verification of property values by Finite Element Method(FEM) analysis method. Finally, in order to design a shape of pole-shoe part of LSM electro-magnet which is hard to design with a basic design method, authors analyze a transition of property values by changing a pole-shoe width and current of the electro-magnet through an analytical method by FEM.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.79-88
• /
• 2015

In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion in WDM system is overcomed by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1, 000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15km$ from 500 km for efficiently compensating overall channels. Thus, the methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which generates a serious problem if it was not made but it is the condition in the case of applying the OPC into multi-channels WDM system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.151-156
• /
• 2013

The experiment was done on cars travelling at the speeds of 20km/h, 60km/h and 100km/h using the performance testing mode for chassis dynamometer. In this experiment, the relativity between the secondary waveform coming from ignition coil and exhaust emissions were measured in case of cars with failures, in oxygen sensor, spark plugs. The following results obtained by analysis of the relativity between the secondary waveform and exhaust emissions. 1) When the oxygen sensor is failure, the average value of CO emission measured was 6.8 times higher than the standard CO emission value and the average value of HC emission measured was 2.3 times higher than the standard emission level. 2) When engine parts are in failure, more fuel enters the cylinder due to longer opening duration of injector, and it tended to make CO and HC emission values increase. 3) Combustion duration, the shape of flame propagation during spark line, and the size of the discharge-induced energy were the three main elements that directly cause variations in CO and HC emission values.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.772-776
• /
• 2007

In order to study the role of residue in the active site of glutathione S-transferase (GST), Arg13 residue in human GST P1-1 was replaced with alanine, lysine and leucine by site-directed mutagenesis to obtain mutants R13A, R13K and R13L. These three mutant enzymes were expressed in Escherichia coli and purified to electrophoretic homogeneity by affinity chromatography on immobilized GSH. Mutation of Arg13 into Ala caused a substantial reduction of the specific activity by 10-fold. Km GSH, Km DCNB and Km EPNP values of R13A were approximately 2-3 fold larger than those of the wild type. Mutation of Arg13 into Ala also significantly affected I50 values of S-methyl-GSH that compete with GSH and ethacrynic acid, an electrophilic substrate-like compound. These results appeared that the substitution of Arg13 with Ala resulted in significant structural change of the active site. Mutation of Arg13 into Leu reduced the catalytic activity by approximately 2-fold, whereas substitution by Lys scarcely affected the activity, indicating the significance of a positively charged residue at position 13. Therefore, arginine 13 participates in catalytic activity as mainly involved in the construction of the proper electrostatic field and conformation of the active site in human GST P1-1.

• Korean Journal of Microbiology
• /
• v.30 no.2
• /
• pp.88-95
• /
• 1992

The genetically engineered microorganisms (GEMS) could be released accidentally or ii)rexperimental purposes, as the genetic engineering, technique ha:. become very popular inany laboratories of biological sciences. But there have been littlt: informations on transkrbehavior of the genetically ~nodified genes in the natural en\ironmentx. In this stutly.antibiotic resistant bacteria were isolated from nat.ural waters. and then GEM strains wereconstructed i'rom the natural isolate (NI) by ~noclification oi' the Km' plasmitl. Thetransferability of the plasmids in the GEM and NI strains were examinetl by con-jugationin Luria-Bertani broth :it 30$^{\circ}$C. Also the cff'ccts 01' mating strain and pH on their transferfrequency and rearrangement of the plasmids in tl-~ec o~ijugantsM ere comp:irati\ely stuclictl.I'hc transkr frequency of Km' plasmid in donor of GEM and N1 strains wah similar a.;about 10 ' when co~ljugation was conducted wit11 M'I'I strain is recipient at pH 7. butthat of 1)KCOOI was lowered to 1.2X 10 '. And when the lab. stlain was uhccl as recipient.the transfer tendency of the plasmid was about same in both (;EM and NI strains usedas donor. All thc tionor 5trains. except for I)KC601. showecl the Ilighcs~ frequency of about10 ' at pH 7 and the frequcncics were lowered at both pH 5 and 9. Hut the mocliliedKm' plasmid in the cloned strain of DKC601 was transferred hy very low frequency of10 "at pH 5 ant1 7 comparing to other GEM strains. especiall! any co~~.jugantws ere notobtained at pH 4 and 9 even after conjugation for 6 hours. Rearrangement of the plasmidstranskrred into the lab. strain was not found in the conjugants. I\ulcornerut a lot of rearrangclncntwas ohservecl nlhen they were transferred into the NI strain. Such a rearrangement wasmore severe when donor was GEM strain rather then NI strain Hut such ;r phenomenonwas less affected by p!-l values.r phenomenon was less affected by p!-l values.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.11-19
• /
• 2002

The seasonal variation of $^7Be$ and $^{137}Cs$ concentrations in airborne dust, precipitation and dry fallout collected at Daejeon during the period of 1998 - 1999 has been studied. The annual mean values of 7Be concentrations in airborne dust, precipitation and dry fallout were in the range of $3.80{\sim}4.29\;mBq\;m^{-3},\;1.25{\sim}1.67\;Bq\;l^{-1},\;19.7{\sim}22.3 MBq\;km^{-2}$, respectively. The annual mean values of $^{137}Cs$ concentrations in airborne dust, precipitation and dry fallout ranged $1.08{\sim}1.28{\mu}Bq\;m^{-3},\;0.44{\sim}2.66 mBq\;l^{-1}\;\;0.036{\sim}0.0455\;MBq\;km^{-2}$, respectively. While the concentrations of $^7Be$ and $^{137}Cs$ in airborne dust and dry fallout were relatively higher in the spring and autumn when the amount of dry fallout increased than in other season, their concentrations in precipitation were relatively lower in the summer when the rainfall increased. The total depositions of $^7Be$ and $^{137}Cs$ due to dry fallout and precipitation were in the range of $80.7{\sim}137MBq\;km^{-2}$ and $0.059{\sim}0.060MBq\;km^{-2}$, respectively. More than 80% of $^7Be$ deposition resulted from precipitation, whereas about 60% of $^{137}Cs$ deposition was due to dry fallout.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.185-190
• /
• 2008

Nine wells have been developed for uses of thermal waters at the Icheon hot spa area. Drilling depths of those hot spring wells range from 166 to 294 m and their piezometric heads are located at about 50 m below the surface. Using the differences between the surface and bottom temperatures within all boreholes, we can simply estimate geothermal gradient in this area. Thus, we obtained the highest, lowest and average gradient values as $64^{\circ}C/km$ from SB-2 well, $45^{\circ}C/km$ from SB-1 well and approximately $54.28^{\circ}C/km$, respectively. However, observing the MRD-2 well additionally drilled into the depth of 996 m, we found out that this study area has widely experienced the temperature disturbance due to thermal groundwater penetration through the fracture systems within the depth of 720 m. Unlikely this phenomenon, we can conclude that the groundwater flow below the depth of 720 m does not exist. Therefore, using only those temperature data below the 720 m depth, we can estimate reasonable geo-thermal gradient values as $33^{\circ}C/km$ in this study area. Pumping test shows that outflowing temperature is $36^{\circ}C$ corresponding to the temperature logging data at 720 m depth.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.61-64
• /
• 2003

This study attempts to analyze both the mis-closures between triangulation points of 3 and 4 glade and permanent sites data, and accuracy of according as change the number of utilized GPS permanent sites and base lines for improvement of the accuracy in GPS surveying using permanent sites data. The result of this study show that the mis-closure between the two points and Jeonju/Chungju/Sangju/Daegu stations of NGI(National Geography Institute) are 0.0051 m, 0.0361 m, 0.0039 m and 0.0198 m respectively. It indicated that the mis-closures were less than the allowed values in the primary/secondary control point specification for GPS surveying, a mis-closure less than 30 mm for the distance less than 30 km and a mis-closure less than 1 PPM${\times}$D(km) for the distance greater than 30 km. Jinan 11 of actual surveying point for the base line 21.4911 km in Jeonju permanent site and 87.8156 km in Sangju permanent site, northing and easting for planimetric errors of Jinan 11 are 0.0120 m and 0.0113 m, northing and easting for planimetric errors of Jinan 12 are 0.0122 m and 0.0115 m.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.625-629
• /
• 2014

For the purpose of the acoustic performance evaluation of noise reduction device(NRD) installed at the top of noise barrier for further decreasing of noise level of 400km/h class high-speed railroad(HEMU), the acoustic performance test method using speaker instead of really running railway vehicle was suggested in this paper. For this, noise source location and frequency spectrum of HEMU was analyzed through the field noise test. These data were used for the determination of speaker's installation positions and frequency correction values applied to the speaker noise source. And, 400 meters long NRD was installed at the site where HEMU will be running at a speed of 400km/h. Finally, the outdoor speaker test with and without NRD showed that this NRD could decrease noise level even more than 3dB(A). In the future, the acoustic performance results of NRD conducted with speaker test will be compared with that of field test for HEMU running at a speed of 400km/h.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.191-208
• /
• 2001

We have recently compiled a database of the properties of 192 impact craters, which supercedes previous compilations. Using our database, the impact structures found in North America, Europe and Australia have been examined; these cratonic areas have been relatively stable for considerably long geological periods, and thus have been best preserved. It is confirmed that there is a close correlation between the geological epoch boundaries, the epochs of mass extinctions, antral the "timing" of impacts. In addition, the terrestrial cumulative flux of objects >20km is found to be $1.77{\times}10^{-15}km^{-2}yr^{-1}$, over the last 120 Myr, which is much smaller than the published values in McEwen et al. (1997) and Shoemaker (1998) ($5.6{\pm}2.8{\times}10^{-15}km^{-2}yr^{-1}$. For terrestrial impact structures with D> 50 km, the apparent cumulative flux over the last 2450 Myr is ~50 times smaller than the corresponding value for the Moon. If we assume that the Earth and the Moon suffered the same level of bombardment over this time, this would mean that the actual flux of impacting bodies, capable of making craters with D)50 km, was ~ 50 times larger than the apparent flux estimated from the currently known terrestrial records.