• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.233-244
• /
• 2012

Purpose: The kinetic evaluation was performed for swine manure (SM) degradation and biogas generation. Methods: The SM was anaerobically digested using batch digesters at feed to inoculum ratio (F/I) of 1.0 under mesophilic conditions ($36.5^{\circ}C$). The specific gas yield was expressed in terms of gram total chemical oxygen demand (mL/g TCOD added) and gram volatile solids added (mL/g VS added) and their effectiveness was discussed. The biogas and methane production were predicted using first order kinetic model and the modified Gompertz model. The critical hydraulic retention time for biomass washout was determined using Chen and Hashimoto model. Results: The biogas and methane yield from SM was 346 and 274 mL/ TCOD added, respectively after 100 days of digestion. The average methane content in the biogas produced from SM was 79% and $H_2S$ concentration was in the range of 3000-4108 ppm. It took around 32-47 days for 80-90% of biogas recovery and the TCOD removal from SM was calculated to be 85%. When the specific biogas and methane yield from SM (with very high TVFA concentration) was expressed in terms of oven dried volatile solids (VS) basis, the gas yield was found to be over estimated. The difference in the measured and predicted gas yield was in the range of 1.2-1.5% when using first order kinetic model and 0.1% when using modified Gompertz model. The effective time for biogas production ($T_{Ef}$) from SM was calculated to be in the range of 30-45 days and the critical hydraulic retention time ($HRT_{Critical}$) for biomass wash out was found to be 9.5 days. Conclusions: The modified Gompertz model could be better in predicting biogas and methane production from SM. The HRT greater than 10 days is recommended for continuous digesters using SM as feedstock.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.152-163
• /
• 2016

Present study investigates the potential of cassava peel and rubber tree bark for the removal of Cr (VI) from aqueous solution. Removal efficiency of more than 99% was obtained during the kinetic adsorption experiments with dosage of 3.5 g/L for cassava peel and 8 g/L for rubber tree bark. By comparing popular isotherm models and kinetic models for evaluating the kinetics of mass transfer, it was observed that Redlich-Peterson model and Langmuir model fitted well ($R^2$ > 0.99) resulting in maximum adsorption capacity as 79.37 mg/g and 43.86 mg/g for cassava peel and rubber tree bark respectively. Validation of pseudo-second order model and Elovich model indicated the possibility of chemisorption being the rate limiting step. The multi-linearity in the diffusion model was further addressed using multi-sites models (two-site series interface (TSSI) and two-site parallel interface (TSPI) models). Considering the influence of interface properties on the kinetic nature of sorption, TSSI model resulted in low mass transfer rate (5% for cassava peel and 10% for rubber tree bark) compared to TSPI model. The study highlights the employability of two-site sorption model for simultaneous representation of different stages of kinetic sorption for finding the rate-limiting process, compared to the separate equilibrium and kinetic modeling attempts.

• Physical Therapy Korea
• /
• v.23 no.4
• /
• pp.55-62
• /
• 2016

Background: The functioning of the serratus anterior (SA) muscle is essential to normal scapulohumeral rhythm during forward flexion (FF) of the shoulder. Also, SA weakness and overuse of the upper trapezius (UT) is observed in patients with shoulder dysfunction and trapezius myalgia. We designed a combination exercise involving FF and scapular protraction with resistance (CFFSP) to activate the SA muscle and to deactivate the UT muscle. Objects: The purpose of this study was to determine whether or not CFFSP would be more effective in activating the SA muscle than FF alone and FF with scapular protraction (FFP). Methods: Nineteen subjects (12 men and 7 women) participated in this study and performed FF, FFP, and CFFSP at $120^{\circ}$. Surface electromyography was applied to the SA, UT, and pectoralis major (PM) muscles, as was one-way analysis of variance (ANOVA) with repeated measures. Statistical significance was set at .05. Bonferroni adjustment was used to counteract the problem of multiple comparisons, with a statistical level of significance of .017 (.05/3). Results: A statistically significant difference was found in relation to the three positions for the SA muscle (p<.001) and the SA/UT ratio (p=.005) using ANOVA. Significantly different results, depending on the position, were also demonstrated using the Bonferroni post-hoc test for the SA muscle ($FF=28.27{\pm}16.20$, $FFP=45.66{\pm}15.81$, and $CFFSP=62.4{\pm}27.21$) and for the SA/UT ratio ($FF=3.04{\pm}2.14$, $FFP=3.61{\pm}2.38$, and $CFFSP=5.95{\pm}3.01$). Significant differences between the three positions was not found regarding the average amplitude of SA/PM muscle ratio (SA/PM: p=.060). Conclusion: We recommend the use of CFFSP to strengthen the SA muscle at $120^{\circ}$.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.43-53
• /
• 2016

The purpose of this study is to examine the meaningfulness and the possibility of developing kinetic narrative educational contents based on English literature with convergent approaches. To accomplish the objective, this paper examines three areas of research such as kinetic education, English literature education, and total physical response-storytelling method. It introduces the following three stages of development procedure: 1) selecting and analyzing English literature, 2) designing a prototype including the story flow, the movement and the motion interaction design, and 3) constructing motion database using Laban movement analysis. Then, how to apply it to young learners is illustrated with 'the story of the three little pigs,' Finally, implication for the field of young learner English education and English literature is discussed.

• Physical Therapy Korea
• /
• v.24 no.1
• /
• pp.79-85
• /
• 2017

Background: The wall squat is considered an effective exercise because it can reduce the knee load and prevent excessive lumbar movement. However, the relationship between wall squat performance and strength of knee extensors and hip extensors remained unclear. Objects: The purpose of this study was to compare the strengths of the knee extensors and hip extensors between groups with low and high wall squat performance. Method: Nineteen males (low performance group: 9 subjects, high performance group: 10 subjects) participated in this study and performed wall squats. The subjects who were performing less than 30% of the average wall squat count were classified into the low wall squat performance group (less than or equal to 4 times) and the subjects who performed more than 30% of the average wall squat count were classified into the high wall squat performance group (greater than or equal to 8 times). Knee extensor and hip extensor strength were measured with a strength measurement system. An independent t-test was used to compare the strengths of the knee extensors and hip extensors between the groups with low and high wall squat performance. Results: The ratios of knee extensor and hip extensor strength to bodyweight were greater in the high wall squat performance group than in the low wall squat performance group (knee extensors: p<.001; hip extensors: p=.03). In the high- and low-performance groups, the ratios of knee extensor strength to bodyweight were $42.74{\pm}5.72$ and $30.76{\pm}8.54$, respectively, and the ratios of hip extensor strength to bodyweight were $31.95{\pm}10.61$ and $20.66{\pm}11.25$, respectively. Conclusion: Our findings suggest that knee extensor and hip extensor strength are needed for high wall squat performance. Thus, exercise to increase the knee and hip extensors strength can be recommended to improve squat performance.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.304-313
• /
• 2015

Background: Ginsenoside Rg3 is a promising anticancer agent. It is usually produced by heat treatment of ginseng, in which ginsenoside Rb1 is the major ginsenoside. A kinetic study was conducted to optimize ginsenoside Rg3 production by the heat treatment of ginsenoside Rb1. Methods: Ginsenoside Rb1 was heated using an isothermal machine at $80^{\circ}C$ and $100^{\circ}C$ and analyzed using HPLC. The kinetic parameters were calculated from the experimental results. The activation energy was estimated and used to simulate the process. The optimized parameters of ginsenoside Rg3 production are suggested based on the simulation. Results: The rate constants were $0.013h^{-1}$ and $0.073h^{-1}$ for the degradation of ginsenosides Rb1 and Rg3 at $80^{\circ}C$, respectively. The corresponding rate constants at $100^{\circ}C$ were $0.045h^{-1}$ and $0.155h^{-1}$. The estimated activation energies of degradation of ginsenosides Rb1 and Rg3 were 69.2 kJ/mol and 40.9 kJ/mol, respectively. The rate constants at different temperatures were evaluated using the estimated activation energies, and the kinetic profiles of ginsenosides Rb1 and Rg3 at each temperature were simulated based on the proposed kinetic model of consecutive reaction. The optimum strategies for producing ginsenoside Rg3 from ginsenoside Rb1 are suggested based on the simulation. With increased temperature, a high concentration of ginsenoside Rg3 is formed rapidly. However, the concentration decreases quickly after the reaching the maximal concentration value. Conclusion: The optimum temperature for producing ginsenoside Rg3 should be the highest temperature technically feasible below $180^{\circ}C$, in consideration of the cooling time. The optimum reaction time for heat treatment is 30 min.

• Physical Therapy Korea
• /
• v.31 no.1
• /
• pp.40-47
• /
• 2024

Background: Single-leg squat (SLS)s are commonly used as assessment tool and closed kinetic exercises are useful for assessing performance of the lower extremities. Pronated feet are associated with foot pressure distribution (FPD) during daily activities. Objects: To compare the FPD during SLSs between groups with pronated and normal feet. Methods: This cross-sectional study included 30 participants (15 each in the pronated foot and control groups) are recruited in this study. The foot posture index was used to distinguish between the pronated foot and control groups. The Zebris FDM (Zebris Medical GmbH) stance analysis system was used to measure the FPD on the dominant side during a SLS, which was divided into three phases. A two-way mixed-model ANOVA was used to identify significant differences in FPD between and within the two groups. Results: In the hallux, the results of the two-way mixed-model ANOVAs revealed a significant difference between the group and across different phases (p < 0.05). The hallux, and central forefoot were significantly different between the group (p < 0.05). Moreover, significant differences across different phases were observed in the hallux, medial forefoot, central forefoot, lateral forefoot, and rearfoot (p < 0.05). The post hoc t-tests were conducted for the hallux and forefoot central regions. In participants with pronated foot, the mean pressure was significantly greater in hallux and significantly lower, in the central forefoot during the descent and holding phases. Conclusion: SLSs are widely used as screening tests and exercises. These findings suggest that individuals with pronated feet should be cautious to avoid excessive pressure on the hallux during the descent-to-hold phase of a SLS.

• Journal of Food Hygiene and Safety
• /
• v.10 no.4
• /
• pp.279-282
• /
• 1995

Eight natural or semistynthesized monoterpenes were examined for their effects in rat brain monoamine oxidase(MAO) using benzylamine as substrate. Thujone and 3-carene were found to have the inhibition effects on rat brain MAQ activity, 38% and 95% inhibition at 103M respectively. The kinetic study on 3-carene, the most potent inhibitive type. But (+) pulegon and (-) isopulegon was found to activate MAO slightly.

• Journal of Surface Science and Engineering
• /
• v.27 no.1
• /
• pp.45-53
• /
• 1994

A kinetic study on the electrodeposition of zinc-iron alloys onto a steel in chloride solutions has been car-ried out using a rotating disc geometry. The results show that the deposition rate was increased with electropotential, disc rotation speed and temperature, and consequently the rate was partly controlled by elec-trochemical reaction and partly by mass transport. The iron content of deposit was more increased with cell voltage than with disc rotating speed and temperature. During electrodeposition process, the addition of metal-lic zinc powder retards oxidation rate of $Fe^{2+}$.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.3
• /
• pp.124-127
• /
• 1985

The kinetic study on the bromine-exchange reaction of antimony tribromide with ${\alpha}$-phenylethyl bromide in nitrobenzene has been carried out, using Br-82 labelled antimony tribromide. The results show that the exchange reaction is first order with respect to ${\alpha}$-phenylethyl bromide, and either second or first order with respect to antimony tribromide depending on its concentration. It is also concluded that ${\alpha}$-phenylethyl bromide exchanges bromine atom with antimony tribromide much faster than other organic bromides previously examined. Reaction mechanisms for the exchange reaction are discussed.