• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.351-358
• /
• 1994

A probabilistic model and analysis methods to determine the means and variances of the velocity and acceleration in stochastically-defined planar pin jointed kinematic chains are presented. The presented model considers the effect of tolerances on link length and radial clearance and uncertainty of pin location as a net effect on the link's effective length. The determination of the mean values and variances of the output variables requires the calculation of sensitivities of secondary variables with respect to the random variables. It is shown that this computation is straightforward and can be accomplished by a conventional kinematic analysis package with minor modification. Thus, the concepts of tolerance and clearance have been captured by the model and analysis. The only input data are the nominal linkage model and statistical information. The "effective link length" model is shown to be applicable to both analytical solution and Monte Carlo simulation. The results from both methods are compared. This paper Ksolves the higher-order kinematic problems for the probabilistic design analysis of stochastically-defined mechanisms.echanisms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1624-1627
• /
• 1997

The 6-DOF parallel manipulator is a closed-kindmatic chain robot manipulator that is capable of providing high structural rigidity and positional accuracy. Because of its advantage, the parallel manipulator have been widely used in many engineering applications such as vehicle/flight driving simulators, rogot maniplators, attachment tool of machining centers, etc. However, the kinematic analysis for the implementation of a real-time controller has some problem because of the lack of an efficient lagorithm for solving its highly nonliner forward kinematic equation, which provides the translational and orientational attitudes of the moveable upper platform from the lenght of manipulator linkages. Generally, Newton-Raphson method has been widely sued to solve the forward kinematic problem but the effectiveness of this methodology depend on how to set initial values. This paper proposes a hybrid method using genetic algorithm(GA) and Newton-Raphson method to solve forward kinematics. That is, the initial values of forward kinematics solution are determined by adopting genetic algorithm which can search grobally optimal solutions. Since determining this values, the determined values are used in Newton-Raphson method for real time calcuation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.211-218
• /
• 1999

The traditional robot manipulators are actuated by continuous range of motion actuators such as motors or hydraulic cylinders. However, there are many applications of mechanisms and robotic manipulators where only a finite number of locations need to be reached, and the robot’s trajectory is not important as long as it is bounded. Binary manipulator uses actuators which have only two stable states. As a result, binary manipulators have a finite number of states. The number of states of a binary manipulator grows exponentially with the number of actuators. This kind of robot manipulator has some advantage compared to a traditional one. Feedback control is not required, task repeatability can be very high, and finite state actuators are generally inexpensive. And this kind of robot manipulator has a fault tolerant mechanism because of kinematic redundancy. In this paper, we solve the inverse kinematic problem of a binary parallel robot manipulator using neural network and test the validity of this structure using some arbitrary points m the workspace of the robot manipulator. As a result, we can show that the neural network can find the nearest feasible points and corresponding binary states of the joints of the robot manipulator

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.426-432
• /
• 2012

In this study, kinematic analysis of forward kinematic, inverse kinematic and jacobian for 6-bar parallel robot was analyzed. In order to analyze the maximum workspace of 6-bar parallel robot, maximum revolution range of active joint was calculated. Also, to analyze forward dynamics and inverse dynamics of 6-bar parallel robot, recurdyn and simmechanics was utilized. Using a PI controller and Feedforward controller make an experiment with square motion of end_effector. The reference value of active joint and trace of end_effector were compared with actual experimental value.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.368-371
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of leg length discrepancy on kinematic changes of the pelvis and hip during gait. Methods: A total of ten healthy women with no history of neurological, musculoskeletal surgery or injuries, or pain in the lower limbs were recruited. They were assigned to two groups; the experimental group (LLD) consisting of five subjects leg length discrepancy of 10mm to 18mm and the control group (CON) consisting of five subjects leg length discrepancy of<10 mm. All participants were instructed to perform three walking trials for further analysis by using the Cortex 3.0 software program. Independent T-test and Mann-Whitney test were used to examine the effects of mild LLD on kinematic changes of the pelvis and hip during gait. Results: Angles of hip flexion, hip abduction, pelvic obliquity, and pelvic tilt in the experimental group were not significantly different compared to those of the control group. Conclusion: Mild leg length discrepancy induces kinematic changes in the lower limbs, including decreased hip flexion, increased hip abduction, and increased pelvic obliquity in the shorter limb, and increased hip adduction and increased pelvic obliquity in the longer limb. However, those changes were not significant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.528-531
• /
• 1997

This paper deals with the kinematic and dynamic modeling of a 3 degree-of-freedom redundantly actuated mobile robot for the purpose of analysis and control. Each wheel is driven by two motors for steering and driving. Therefore, the system becomes force-redundant since the number of input variable is greater than the number of output variable. The kinematic and dynamic models in terms of three independent joint variables are derived. Also, a load distribution method to determine the input loads is introduced. Finally we demonstrate the feasibility of the proposed algorithms through simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.11-17
• /
• 1998

In this study, a procedure is presented for the dynamic analysis of a multibody tracked vehicle system. the planner tracked vehicle model used in this investigation is assumed to consist of two kinematically decoupled subsystems, i.e., the chassis subsys- tem and track sub-system. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. The recursive kinematic and dynamic formulation module of the vehicle will be developed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.40-44
• /
• 1998

In this paper, a kinematic and dynamic model for an excavator is presented. A graphic user interface program for kinematic-dynamic analysis for the excavator is developed. To predict the stiffness and damping properties of the joint between the vehicle and the track, a parameter study is executed. Using the predicted joint stiffness and damping, the jerk simulation for the excavator is reproduced. Simulation results are compared with the test results to confirm the validity of the simulation model.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.78-85
• /
• 2011

This article investigates kinematic characteristics of a Sch$\ddot{o}$nflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.

• Journal of the Korean Society for Railway
• /
• v.2 no.1
• /
• pp.47-55
• /
• 1999

In this paper, an efficient and accurate formulation for the transient analysis of constrained multibody systems is presented. The formulation employs Kane's method along with the null space method. Kane's method reduces the dimension of equations of motion by using partial velocity matrix: it can improve the efficiency of the formulation. Furthermore, the formulation partitions the coefficient matrix of linear and nonlinear equations into several sub-matrices using kinematic uncoupling. This can solve the equations more efficiently. The proposed formulation can be used to perform dynamic analysis of systems which can be partitioned into several sub-systems such as train systems. One numerical example is given to demonstrate the efficiency and accuracy of the formulation, and another numerical example is given to show its application to the train systems.