• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.206-209
• /
• 1999

There exists an acute need for high voltage solid-state-switches in a broad area of applications. With the proposed method using simple voltage balancing circuit with series connected IGBTs, it is realized high voltage semiconductor switches with working voltages of several order kilo-volts. The operation principle of the proposed circuit is explained and analyzed. Transient and static voltage-balancing is tested on a experimenta 3kV/45A switch with four series-connected IGBTs.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.616-621
• /
• 2015

Atmospheric pressure plasma is used in the biological and medical fields. Miniaturization and safety are important in the application of apply atmospheric plasma to bio devices. In this study, we made a small, pocket-sized inverter for the discharge of atmospheric plasma. We used pulse power to control the neutral gas temperature at which the, when plasma was discharged. We used direct current of 5 V of bias(voltage). The output voltage is about 1 to 2 kilo volts the frequency is about 80 kilo hertz. We analyzsed the characteristics of the atmospheric plasma using OES(Optical emission spectroscopy) and the Current-Voltage characteristic of pulse power. By calculating of the current voltage characteristics, we were able to determine that, when the duty ratio increased, the power that actually effects the plasma discharge also increased. To apply atmospheric plasma to human organisms, the temperature is the most important factor, we were able to control the temperature by modulating the pulse power duty ratio. This means we can use atmospheric plasma on the human body or in other areas of the medical field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.273-277
• /
• 1999

A cold cathode flourescent lamp for the backlight in the notebook computer requires high input voltage about 1300(V) when it turns on. But once a discharge starts, the input voltage can be dropped by about one-third for continued output. The equivalent impedance also varies from open to several dozens of kilo-ohms. The piezoelectric transformer converts electrical energy into mechanical energy and then converts it back to electrical energy at a high voltage. Its high output voltage, high efficiency and small size are suitable for driving the LCD backlight in the notebook computer. The piezoelectric transformer operates near the resonance frequency and the output waveform is close to sine wave with very little noise. This paper suggests an inverter for LCD backlight of notebook computer using piezoelectric transformer that includes voltage to frequency converter for gate signal which is useful for tracking of variable resonance frequency depending on load impedance.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.527-532
• /
• 2011

Due to the need for improved fuel consumption and the trend towards increasing the electrical content in automobiles, integrated starter generator (ISG) systems are being considered by the automotive industry. In this paper, in order to change the conventional generator of a vehicle, a belt driven integrated starter generator is considered. The overall ISG system, the design considerations for the claw pole type AC electric machine and a low voltage very high current power stage implementation are discussed. Test data on the low voltage claw pole type machine is presented, and a large current voltage source DC/AC inverter suitable for low voltage integrated starter generator operation is also presented. A metal based PCB (Printed Circuit Board) power unit to attach the 4-parallel MOS-FETs is used to achieve extremely high current capability. Furthermore, issues related to the torque assistance during vehicle acceleration and the generation/regeneration characteristics are discussed. A prototype with the capability of up to 1000 A and 27 V is designed and built to validate the kilo-amp inverter.

• 한국정보전자통신기술학회논문지
• /
• 제10권6호
• /
• pp.558-569
• /
• 2017

본 논문에서는 MCU 내장형 1.5V 단일전원 256Kb EEPROM IP는 배터리 응용을 위해 설계되었다. 기존의 body-potential 바이어싱 회로를 사용하는 cross-coupled VPP (Boosted Voltage) 전하펌프회로는 erase와 program 모드에서 빠져나올 때 5V cross-coupled PMOS 소자에 8.53V의 고전압이 걸리면서 junction breakdown이나 gate oxide breakdown에 의해 소자가 파괴될 수 있다. 그래서 본 논문에서는 cross-coupled 전하펌프회로의 출력 노드는 VDD로 프리차징시키는 동시에 펌핑 노드들을 각 펌핑 단의 입력전압으로 프리차징하므로 5V PMOS 소자에 5.5V 이상의 고전압이 걸리지 않도록 하므로 breakdown이 일어나는 것을 방지하였다. 한편 256Kb을 erase하거나 program하는 시간을 줄이기 위해 all erase, even program, odd program과 all program 모드를 지원하고 있다. 또한 cell disturb 테스트 시간을 줄이기 위해 cell disturb 테스트 모드를 이용하여 256Kb EEPROM 셀의 disturb를 한꺼번에 인가하므로 disturb 테스트 시간을 줄였다. 마지막으로 이 논문에서는 erase-verify-read 모드에서 40ns의 cycle 시간을 만족하기 위해 CG disable 시간이 빠른 CG 구동회로는 새롭게 제안되었다.

• 전기의세계
• /
• 제18권1호
• /
• pp.24-29
• /
• 1969

This is preliminary study concerning the future construction and operation of 345KV power transmission line in Korea which will be added to the existing 161KV power system by the end of 1970 in order to increase the power carrying capacity between Seoul and Pusan area; 350 kilo meters aparts, in accordance with the ambitious second five years power development schedule of Korea Electric Company. The result of this study says that an intermidiate switching station should be installed at the middle position of the line to improve the transient stability of the system, considerable amount of capacitors or synchronous condenser are to be installed to reduce the voltage drop at receving end of line during the heavy load hours, and also in some measure to avoid the voltage rise by self-excitation of power generators during the light load hours and while energizing the line. This is the first attempt to realize the EHV power transmission line in Korea so that the additional study is necessary on the kind and size of conductors, the necessary number of insulators and the suitable clearance distances between conductor and steel tower or earth from the technical and economical view points. These are necessary steps to be taken by the writer before getting into the calculation on the transient stablity of the power system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.84-87
• /
• 2010

본 논문에서는 power management IC에 사용되는 아날로그 트리밍용 antifuse OTP 셀을 제작하였다. VPP (=7V)와 VNN (=-5V)의 Dual program voltage를 이용하는 antifuse OTP 셀은 antifuse 양단에 hard breakdown 이상의 전압을 인가하여 thin gate oxide를 breakdown시킨다. $0.18{\mu}m$ BCD 공정을 이용하여 제작된 antifuse OTP 셀의 면적은 $48.01{\mu}m^2$으로 eFuse OTP 셀 면적의 44.6% 수준이다. 20개의 테스트 패턴을 측정한 결과 프로그램 후 antifuse의 저항은 수 $k{\Omega}$ 이하로 양호하게 측정되었다.

• 한국정보전자통신기술학회논문지
• /
• 제12권6호
• /
• pp.619-628
• /
• 2019

본 논문에서는 진성난수 생성기를 위한 베타선 센서를 설계하였다. PMOS 피드백 트랜지스터의 게이트를 DC 전압으로 바이어스하는 대신 PMOS 피드백 트랜지스터에 흐르는 전류가 PVT 변동에 둔감하도록 설계된 전류 바이어스 회로를 mirroring하게 흐르도록 하므로 CSA의 signal voltage의 변동을 최소화하였다. 그리고 BGR (Bandgap Reference) 회로를 이용하여 공급된 정전류를 이용하여 신호 전압을 VCOM 전압 레벨까지 충전하므로 충전 시간의 변동을 줄여 고속 감지가 가능하도록 하였다. 0.18㎛ CMOS 공정으로 설계된 베타선 센서는 corner별 모의실험 결과 CSA 회로의 최소 신호전압과 최대 신호전압은 각각 205mV와 303mV이고, pulse shaper를 거친 출력 신호를 비교기의 VTHR (Threshold Voltage) 전압과 비교해서 발생된 펄스의 최소와 최대 폭은 각각 0.592㎲와 1.247㎲로 100kHz의 고속 감지가 가능한 결과가 나왔으며, 최대 100Kpulse/sec로 계수할 수 있도록 설계하였다.

• 방사선산업학회지
• /
• 제12권4호
• /
• pp.267-276
• /
• 2018

A Hoffman 3D Brain Phantom was used to evaluate two PET/CT scanners, BIO_40 and D_690, according to the radiation dose of CT (low, medium and high) at a fixed kilo-voltage-peak (kVp) with the tube current(mA) varied in 17~20 stages(Bio_40 PET/CT scanner: the tube voltage was fixed to 120 kVp, the effective tube current(mAs) was increased from 33 mAs to 190 mAs in 10 mAs increments, D_690 PET/CT scanner: the tube voltage was fixed to 140 kVp, tube current(mA) was increased from 10 mAs to 200 mAs in 10 mAs increments). After obtaining the PET image, an attenuation correction was conducted based on the attenuation map, which led to an analysis of the difference in the image. First, the ratio of white to gray matter for each scanner was examined by comparing the coefficient of variation (CV) depending on the average ratio. In addition, a blind test was carried out to evaluate the image. According to the study results, the BIO_40 and D_690 scanners showed a <1% change in CV value due to the tube current conversion. The change in the coefficients of white and gray matter showed that the Z value was negative for both scanners, indicating that the coefficient of gray matter was higher than that of white matter. Moreover, no difference was observed when the images were compared in a blind test.

• 한국방사선학회논문지
• /
• 제15권3호
• /
• pp.293-299
• /
• 2021

CT 장치를 이용하여 주기적인 검사를 시행하는 환자의 불가항력적 방사선 피폭을 줄이기 위해 다양한 스캔 파라미터 중 X선의 투과력과 밀접한 관전압의 변화를 통해 환자 선량을 감소시킬 수 있는 스캔 방법을 알아보았다. 실험결과 일반적으로 임상에서 많이 적용하는 120 kVp 대신 100 kVp를 적용하여 스캔 시 CTDI가 약 41 % 감소하였다. 또한 화질 변화정도는 CT value는 1046.1±3.7 HU, Pixel value는 71.4±7.9로 측정되었으며 통계분석결과 큰 차이가 없는 것으로 분석되었다(0.05