• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.95-98
• /
• 2012

There are many high-rise apartment building construction in Korea. There was an accident to pass through worker head by rebar dropped from height place. Therefore, low cost-high effectiveness method to prevent this type of accident should be revised and applied into the construction site. This study is to find out which method could be effectively applied to a site with low cost. Practical field test at 4th floor, 10th floor of apartment building site using re-bar diameter D10, D13, D16, D19, D22 with a length of 1 m, 1.5 m, 2 m, 2.5 m, 3 m which are common by used in a site. The test has also been done with a cover of styrofoam thickness 4.5 cm and thickness 9cm on field drop preventing net. One sheet of styrofoam thickness 45 mm has approximately two times stronger than only prevention net, It is found. Also, Two sheets have approximately two times stronger than one sheet of it.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.249-255
• /
• 2000

This study has been carried out to estimate aboveground biomass and net primary production in a 22-year-old Betula platyphylla and 24-year-old juglans mandshurica plantations. Nine sample trees were cut in each plantation. Estimations for aboveground biomass and net primary production were made by the equation model $Wt=aD^b$ where Wt is ovendry weight in kg and D is DBH in cm. Total aboveground biomass was 79.33t/ha in Betula platyphylla plantation and 67.47t/ha in Juglans mandshurica plantation. The proportion of each tree component to total aboveground biomass was high in order of bolewood, branches, bolebark, and leaves in the two plantations. Aboveground total net primary production was estimated at 9,92t/ha in Betula platyphylla plantation and 11.79t/ha in Juglans mandshurica plantation. There was greater net primary production in Juglans mandshurica plantation than in Betula platyphylla plantation because of greater bolewood, bolebark, current twig, and branch net primary productions in Juglans mandshurica plantation than in Betula platyphylla plantation.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.64-68
• /
• 2003

The 1.6 vol% and 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting for investigating the effect of heat treatment on tensile strength for composites. The tensile strength without T6 treatment at 293 K was increased with increasing the volume fraction of TiNi fiber and at 363 K the higher the pre-strain, the higher the tensile strength. The tensile strength of the composite with $T_{6}$ treatment at 293 K was found to increase with increasing both the amount of pre-strain and the volume fraction of TiNi fiber and was higher than that without $T_{6}$ treatment. It should be noted that the tensile strength 2.5vol%TiNi/6061Al composites rolled at a 38% reduction ratio was the maximum value of 298 MPa. The tensile strength of composites decreased with increasing the reduction ratio over 38% because of the rupture of TiNi fiber.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.194-198
• /
• 2007

Yield and ginsenoside contents of ginseng (Panax ginseng C. A. Meyer) is affected by light intensity and quality, and the color and the thickness of PE shading net when PE net is utilized for shading material. This study was carried out to investigate the effect of light quality on root yield and ginsenoside contents off-year-old ginseng by using polyethylene shading net with each blue and yellow color, Spectral irradiance under blue and yellow shading net showed the peak at 498 nm and 606 nm, respectively, which made distinct difference in light quality. Heat injury ratio of blue shading net was increased distinctly more than that of yellow shading net in summer season because of higher transmitted quantum (23%)and air temperature (0.3 $^{\circ}$C) in blue shading net than those of yellow shading net. Chlorophyll content and leaf area under yellow shading net were higher than those of blue shading net, and its heat injury ratio was lower than those of blue. These effects may led to 48% higher increase of root yield under yellow shading net than that under blue shading net. The content of total ginsenoside in taproot was not significantly differed between blue and yellow shading net, while the content in lateral and fine root was significantly increased in blue shading net compared to yellow shading net. PDM ratio of blue shading net showed more significant increase in lateral root than that of yellow shading net. All of Rb$_1$/Rg$_1$ ratio in three parts of root under blue shading net was higher than that of yellow shading net, but there were no significant increase in the ratio of lateral root.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.39-42
• /
• 2000

본 논문은 워크플로우 모델링 도구인 ICN(Information Control Net)을 기반으로 하는 워크플로우 제어 의존성 분석을 위한 도구를 구현하였다. 즉, ICN 모델로 정의된 워크플로우의 각 단위업무(Activity)들 간에 존재하는 제어 의존 관계를 표현하기 위한 제어 의존 넷(Control Dependency Net)을 정형적인 방법으로 정의, 표현하였다. 본 논문에서 정의된 제어 의존 넷은 워크플로우 빌드타임(Build-time) 측면과 런타임(Run-time)측면에서 여러 가지 기능을 제공한다. 전자의 측면에서는 워크플로우 모델링시 시멘틱 에러 테스팅 기능을 효과적으로 적용될 수 있으며 후자의 측면에서는 제어 흐름의 동적 변경(dynamic Change)기능의 완결성 및 프로세스 안의 단위업무(Activity) 간의 경로 및 경로 대한 정보를 제공한다.

• Journal of Environmental Policy
• /
• v.9 no.4
• /
• pp.29-52
• /
• 2010

This paper analyzes the firm's financial characteristics, influence over the adoption of the ISO 14001 adoption in our analyses. We used the T-test, a logistic regression analysis. We chose 112 Steel Enterprises from Korea Accreditation Board. The independent variables are current ratio, debt ratio, fixed assets to net worth and fixed liabilities, gross margin on sales, total assets turnover, net sales growth rate. This study tests three hypotheses on management performance of adoption of ISO 14001. The main findings are as follows. The first hypothesis is supported in terms of debt ratio, fixed assets to net worth and fixed liabilities, net sales growth rate at the 1%, 5%, 5% significance level. The second one is supported in terms of current ratio, debt ratio, fixed assets to net worth and fixed liabilities at the 10%, 1%, 1% significance level. The third one is supported in terms of gross margin on sales, total assets turnover at the 1%, 10% significance level. These findings have important implications

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.450-454
• /
• 1988

In order to represent and analyze distributed system design, the model based on an extended form of Petri nets, which enables one to represent both the structure and the behavior of a distributed system, is predented. Behavioral properties of the design representation are verified by translating the extended Petri net into an equivalent ordinary Petri net. The model emphasizes the unified representation of control flows, hierarchical structure, and distributed system state. Modeling technique isemployed for the performance and function analysis of flexible manufacturing system with a set of processors.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.373-378
• /
• 1991

The skin and fleshy substance on the net fiber of sponge-gourd fruit pressed mechanically was removed with 0.2% NaOH solution in $3{\sim}5$ hours. The treatment of 0.2% NaOH with 0.02% Monopol(non-ionogenic polyoxethylen derivative) as surfactnat and with 0.1% $Ca(OCl)_2$ as bleaching agent enhanced the effect to remove the fleshy substance and improve the quality of net fiber. Also, the wet hardness and tensile strength of net fiber were controlled by the crosslinkage of the fiber with glu tardialdehyde, glyoxal, and formalin, respectively. The net fiber was stable on the acid and alkaline solutions. Also the range of temperature to degradate the fiber was $338{\sim}385^{\circ}C$. These values indicated a fair stability. The improved net fiber can be used for raw material of bath, dish washing, oil and gas filter, and many kinds of decorations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.110-115
• /
• 2012

This study describes the characteristics of combustion and exhaust emission in the special engine applying a fuel reactivity controlled compression ignition (RCCI) concept with two different energizing type (solenoid and piezoelectric) injectors for diesel injection. A diesel-gasoline mixed dual-fuel reactivity controlled compression ignition concept is demonstrated as a promising method to achieve high thermal efficiency and low emission in internal combustion engines for transportation vehicles. For investigating the combustion characteristics of RCCI, engine experiments were performed in a light-duty diesel engine over a range of injection timing and mixing rate of gasoline in mass. It was investigated that by increasing the nozzle hole diameter, increasing the combustion pressure and the net indicated mean effective pressure. $NO_x$ and soot can be reduced by advancing start of injection in 84 mixing rate of gasoline in mass. The resulting operation showed that light duty engine could achieve 48 percent net indicated efficiency and 191[g/kW-hr] net indicated specific fuel consumption with lower levels of nitrogen oxides and soot.