• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.235-243
• /
• 2012

Population dynamics of the American serpentine leafminer, Liriomyza trifolii (Burgess), were observed and modeled in order to compare the effects of air and tomato leaf temperatures inside a greenhouse using DYMEX model builder and simulator (pre-programed module based simulation programs developed by CSIRO, Australia). The DYMEX model simulator consisted of a series of modules with the parameters of temperature dependent development and oviposition models of L. trifolii were incorporated from pre-published data. Leaf surface temperatures of cherry tomato leaves (cv. 'Koko') were monitored according to three tomato plant positions (top, > 1.8 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at the same three positions using a self-contained temperature logger. Data sets for the observed air temperature and average leaf surface temperatures were collected (top and bottom surfaces), and incorporated into the DYMEX simulator in order to compare the effects of air and leaf surface temperature on the population dynamics of L. trifolii. The initial population consisted of 50 eggs, which were laid by five female L. trifolii in early June. The number of L. trifolii larvae was counted by visual inspection of the tomato plants in order to verify the performance of DYMEX simulation. The egg, pupa, and adult stage of L. trifolii could not be counted due to its infeasible of visual inspection. A significant positive correlation between the observed and the predicted numbers of larvae was found when the leaf surface temperatures were incorporated into the DYMEX simulation (r = 0.97, p < 0.01), but no significant positive correlation was observed with air temperatures(r = 0.40, p = 0.18). This study demonstrated that the population dynamics of L. trifolii was affected greatly by the leaf temperatures, though to little discernible degree by the air temperatures, and thus the leaf surface temperature should be for a consideration in the management of L. trifolii within cherry tomato greenhouses.

• Applied Microscopy
• /
• v.37 no.4
• /
• pp.271-280
• /
• 2007

Tonicity-responsive enhancer binding protein(TonEBP) is a transcriptional factor essential in the function and development of the renal medulla. TonEBP plays a critical role in protecting renal medullary cells from the deleterious effect of hypertonicity. TonEBP is a key regulator of urinary concentration via stimulation of transcription of urea transporter(UT) in a manner independent of vasopressin. UT in the renal inner medulla is important for the conservation of body water due to its role in the urine concentrating mechanism. Mongolian gerbil(Meriones unguiculatus) has been as an model animal for studying the neurological disease such as stroke and epilepsy because of the congenital incomplete in Willis circle, as well as the investigation of water metabolism because of the long time-survival in the condition of water-deprived desert condition, compared with other species animal. In this study, we divide 3 groups of which each group include the 5 animals. In the study of 7 or 14 days water restricted condition, we investigated the TonEBP and UT-A by using a immunohistochemistry in the kidney. In the normal kidney, the distribution of TonEBP is generally localized on nuclei of inner medullary cells. Nuclear distribution of TonEBP is generally increased throughout the medulla in 7 and 14 days dehydrated group compared with control group. Increased nuclear localization was particularly dramatic in thin limbs. In control groups, UT-A was expressed in inner stripe of outer medulla(ISOM) and inner medulla(IM). UT-A was present in the terminal part of the short-loop of descending thin limbs (DTL) in ISOM and also present in the inner medullary collecting duct(IMCD), where the intensity of it gradually increased toward the papillary tip. In the dehydrated kidney, UT-A immunoreactivity was increased in the short-loop of DTL in ISOM and in the long-loop of DTL in the initial part of IM, where was expressed moderate positive reaction in the normal kidney. Also it was up regulated in the IMCD in initial & middle part of IM. However UT-A down regulated in the IMCD, where the intensity of it gradually decreased toward the papillary tip. These findings suggest that increased levels of TonEBP in medulla and UT-A in shot-loop of DTL and IMCD play a important role for maintain fluid balance in the water-deprived mongolian gerbil kidney.

• Journal of Science Education
• /
• v.42 no.1
• /
• pp.27-48
• /
• 2018

The purposes of this study are to derive suggestions and implications to improve the continuity of Korean Science & Practical Arts (Technology Home Economics) curricula through international comparative analysis with focus on the science curricula or standards in five countries (Canada, New Zealand, Singapore, the United States, Korea). Original documents of the national curriculums or standards of each country collected from NCIC comparatively analyzed the big concepts of the 'system' and 'energy' based on features of related components of curriculum contents, vertical, and lateral connectivity. The results indicated that the big concepts of systems and energy were used internationally to consider the curriculum continuity. In most countries, the big concept of system was used as a framework to integrate science with technology or other contents. In particular, it was also utilized to strengthen vertical and lateral connectivity in earth science and space science contents area. In the comparison of countries for the system as the big concept, New Zealand focused interrelationship between system and human activities, systems' interaction, levels and features of system concept for the linkage between grades and subjects on the basis of level. In the case of Canada and Singapore, science and technology are combined to strengthen contents' connection. However, the revised 2015 curriculum has a lack of continuity and sequence because the concepts of system and energy were concentrated on a specific grade and contents' area. The curriculum was not developed systematically for multiple grades according to their levels. In conclusion, Korean science curriculum requires sufficient understanding of students' learning and research on learning progressions and curriculum continuity. In addition, it is very important to constitute the curriculum based on the vertical and lateral connectivity in order to improve science education and to foster students' key competencies and abilities.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.213-220
• /
• 2006

In year 2003, a soybean(Glycine max) sample showing severe dwarfing symptom was collected from a farmers' field in Cheongsong in Korea. The results from the diagnosis of the sample by RT-PCR revealed that it was infected by Soybean dwarf virus(SbDV), SbDV-L81. This study could be the first report of the occurrence of the virus in Korea. To further characterize the virus, the partial nucleotide sequence of the genomic RNA of SbDV-L81 was determined by RT-PCR using species-specific primers. The sequences were analyzed and subsequently compared to previously characterized strains of SbDV based on the pattern of symptom expression and vector specificities. The intergenic region between ORF 2 and 3 and the coding regions of ORF 2, 3 and 4 were relatively similar to those of dwarfing strains(SbDV-DS and DP) rather than those of yellowing strains(SbDV-YS and YP). Likewise, the result from the analysis of 5'-half of the coding region of ORF5 indicated that SbDV-L81 was closely related to strains(SbDV-YP and DP) transmitted by Acyrthosiphon pisum. These data from the natural symptom and the comparisons of five regions of nucleotide sequences of SbDV suggested that SbDV-L81 might be closely related SbDV-DP.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.57-76
• /
• 2017

Recently, consumer needs are diversifying as information technologies are evolving rapidly. A lot of IT devices such as smart phones and tablet PCs are launching following the trend of information technology. While IT devices focused on the technical advance and improvement a few years ago, the situation is changed now. There is no difference in functional aspects, so companies are trying to differentiate IT devices in terms of appearance design. Consumers also consider design as being a more important factor in the decision-making of smart phones. Smart phones have become a fashion items, revealing consumers' own characteristics and personality. As the design and appearance of the smartphone become important things, it is necessary to examine consumer values from the design and appearance of IT devices. Furthermore, it is crucial to clarify the mechanisms of consumers' design evaluation and develop the design evaluation model based on the mechanism. Since the influence of design gets continuously strong, various and many studies related to design were carried out. These studies can classify three main streams. The first stream focuses on the role of design from the perspective of marketing and communication. The second one is the studies to find out an effective and appealing design from the perspective of industrial design. The last one is to examine the consumer values created by a product design, which means consumers' perception or feeling when they look and feel it. These numerous studies somewhat have dealt with consumer values, but they do not include product attributes, or do not cover the whole process and mechanism from product attributes to consumer values. In this study, we try to develop the holistic design evaluation model based on consumer values based on three-step approach from product attributes, perceived attributes, to consumer values. Product attributes means the real and physical characteristics each smart phone has. They consist of bezel, length, width, thickness, weight and curvature. Perceived attributes are derived from consumers' perception on product attributes. We consider perceived size of device, perceived size of display, perceived thickness, perceived weight, perceived bezel (top - bottom / left - right side), perceived curvature of edge, perceived curvature of back side, gap of each part, perceived gloss and perceived screen ratio. They are factorized into six clusters named as 'Size,' 'Slimness,' 'No-Frame,' 'Roundness,' 'Screen Ratio,' and 'Looseness.' We conducted qualitative research to find out consumer values, which are categorized into two: look and feel values. We identified the values named as 'Silhouette,' 'Neatness,' 'Attractiveness,' 'Polishing,' 'Innovativeness,' 'Professionalism,' 'Intellectualness,' 'Individuality,' and 'Distinctiveness' in terms of look values. Also, we identifies 'Stability,' 'Comfortableness,' 'Grip,' 'Solidity,' 'Non-fragility,' and 'Smoothness' in terms of feel values. They are factorized into five key values: 'Sleek Value,' 'Professional Value,' 'Unique Value,' 'Comfortable Value,' and 'Solid Value.' Finally, we developed the holistic design evaluation model by analyzing each relationship from product attributes, perceived attributes, to consumer values. This study has several theoretical and practical contributions. First, we found consumer values in terms of design evaluation and implicit chain relationship from the objective and physical characteristics to the subjective and mental evaluation. That is, the model explains the mechanism of design evaluation in consumer minds. Second, we suggest a general design evaluation process from product attributes, perceived attributes to consumer values. It is an adaptable methodology not only smart phone but also other IT products. Practically, this model can support the decision-making when companies initiative new product development. It can help product designers focus on their capacities with limited resources. Moreover, if its model combined with machine learning collecting consumers' purchasing data, most preferred values, sales data, etc., it will be able to evolve intelligent design decision support system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1839-1846
• /
• 2015

The purpose of this study was to evaluate the effects of cultivar and milling degree of barley on quality characteristics of Makgeolli as well as compare differences between barley Makgeolli and rice Makgeolli. Saessal-bori groups (Ss-4, Ss-12, and Ss-18) showed dry lees contents of 92.3 g, 69.4 g, and 63.8 g, respectively, whereas Huinchalssal-bori groups (Hcs-6, Hcs-14, and Hcs-20) showed contents of 62.3 g, 42.2 g, and 32.2 g. There were significant differences in quality characteristics between milling degrees and cultivars (P<0.05). The moisture, ash, crude protein, and crude fat contents of raw materials decreased with elevated milling degree. Especially, ash content of raw materials had a direct effect on Makgeolli. The pH, total acidity, and amino acidity milling with elevated decreased degree. There were no differences in total sugar or alcohol content in Makgeolli according to milling degree of barley, whereas there were significant differences between cultivars. Barley Makgeolli showed total sugar and alcohol contents of $10.7{\sim}11.8^{\circ}Brix$ and 14.07~15.07%, respectively, which were significantly lower than $12.0{\sim}12.2^{\circ}Brix$ and 17.27~17.77% in rice Makgeolli (P<0.05). Differences in colors of raw barley according to milling degree had effects on chromaticity of Makgeolli; as milling degree increased, L and b values increased. Lactic acid bacteria counts were 7.21, 6.99, and 6.67 log CFU/mL in Ss-4, Ss-12, and Ss-18, respectively, as well as 6.14, 5.39, and 5.65 log CFU/mL in Hcs-6, Hcs-14, and Hcs-20, which suggests significant reductions with increased milling degree (P<0.05). The same trend was observed in yeast as a key quality of Makgeolli. Suspension stability differed depending on milling degree, so it is expected that suspension stability can be improved by adjusting milling degree.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.399-404
• /
• 1997

This paper is presenting a practical result of environmental manipulation effect on pine mushroom Tricholoma matsutake yield and a discussion of key factor seeking for improving pine mushroom production by analyzing the effects on mushroom yield for 10 years with applying five kinds of environmental control at the pine stands located in Namwon, Chollabuk-do, Korea. The environmental controls included density control and forest floor manipulations, and the treatments were applied during early summer of 1983. The mushroom yield itself did not show statistically significant differences among the treatments. But, we could manifest the treatment effects by calculating the relative yield in percent on the basis of pretreatment yield collected in 1982. The forest floor manipulation with density control may affect pine mushroom yield in short term, and continuous management should be applied to keep and improve the mushroom production. The fine root activity was the most important factor of pine mushroom production at the Namwon research site since the floor raking resulted in the largest effect on the mushroom yield although the environmental condition for the growth of fungi is important for pine mushroom production. In addition, the pine mushroom forest with sandy soils demands adequate litter layer since the litter removal showed relatively detrimental effects on pine mushroom yield compared to that in litter covered plot at the research site. That is, soil texture should be considered for forest floor manipulation, and it is reconfirmed that the environmental control to improve pine mushroom production should be applied differently by each region.

• Journal of The Korean Association of Information Education
• /
• v.12 no.1
• /
• pp.9-22
• /
• 2008

The purpose of this research is to develop a prototype of the support system in order for team building associated with web-based project learning having applied Kolb's learning style. To accomplish this purpose, the following research tasks were performed. First, core idea in order to embody the system's value, key activities, tools that will support pertinent activities and the strategy so as to develop guidelines, etc. were devised and prepared. Second, a system was designed on the basis of structural model of teaching design, then after, interface was developed. The core factors in this system are inspection of learning style, organizing a team and team building. Above all, it is required to make learners know about learning environments, of which they are in favor, and also its distinctive features through inspection of learning style, and then focusing on learning style, a team should be organized insomuch as to accommodate a variety of learning styles as much as possible. For the purpose of team building, after learning style of each constituent member of the team has been made known, then the roles will be divided among the constituent members of the team so as to suit their individual characteristics referring to each of their learning styles that have been exposed. To verify the value of this system developed and efficiency thereof, a focus group interview was conducted. The focus group consisted of professionals, all from related fields. After the interview, the points required to make further improvements were elicited and taken care of by follow-up actions as needed. And having reflected such improvements made, the final system was developed. With this newly developed system, learners can get the results of inspection of learning style so quickly by performing inspection any time any where, and based on the results from such inspection, a team comprising dissimilar constituents who exhibit a variety of different propensities will be automatically organized. Thus, this system may be used not only for web-based project learning having unspecified persons elected as constituents, but in the offline space also.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.711-718
• /
• 2007

Most cattle breeds have a coat color pattern that is characteristic for the breed. Korean cattle(Hanwoo) has a coat color ranging from yellowish brown to dark brown including a red coat color. Variation in the Hanwoo coat color is likely to be the effects of modified genes segregating within the Hanwoo breed. MC1R encoded by the Extension(E) locus was almost fixed with recessive red e allele in the Hanwoo, but other gene(s) might be affecting the variation of the Hanwoo coat color into yellowish to red brown. We have analyzed a segregation of coat color in the F2 families generated from two Hanwoo bulls(yellowish brown) mated to six F1 dams(black) derived from Hanwoo and Holstein crosses. Segregation of coat color in the offspring found a ratio of 1(yellowish brown) : 1(black) and this ratio indicates that a single gene may play a major role for the Hanwoo coat color. We further investigated SNPs in MC1R, ASIP and TYRP1 loci to determine genetic cause of the Hanwoo coat color. Several polymorphisms within ASIP intron 2 and TYRP1 exons were found but not conserved within the Hanwoo population. However, the segregation of the MC1R e allele was completely associated with the Hanwoo coat color. Based on this information, it is clear that the MC1R e allele is mainly responsible for the yellowish red Hanwoo coat color. Further study is warrant to identify possible genetic interaction between MC1R e allele and other coat color related gene(s) for the variation of Hanwoo coat color from yellowish brown to dark brown. (Key words : Hanwoo, Coat color, SNP, MC1R, ASIP, TYRP1)

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.282-287
• /
• 2012

This study was carried out to clarify the effects of the application of pesticide by different spray nozzle types on pesticide residues. The average droplet size and discharge rate were investigated when the manual compressed sprayer with two head disk type nozzle and the knapsack engine powered sprayer with two head fan shape nozzles were used. The fan type nozzles were classified into three types by the number of orifice in the nozzle. Three type nozzles tested were fan with one orifice, fan with two orifices and fan with three orifices. Fan (trade name : D-3) with 2.4 L/min. of the discharge rate and $76{\mu}m$ of the average droplet size while maintaining constant pressure $1.1{\pm}0.2$ MPa, and fan D-35 with 2.6 L/min. and $90{\mu}m$ while maintaining constant pressure $1.0{\pm}0.2$ MPa were appropriate. The orifice size of D-3 was 0.65 mm length ${\times}$ 0.45 mm width and the orifice size of D-35 was 0.62 mm length ${\times}$ 0.46 mm width. The residue levels of imidacloprid on perilla leaves among four applications by four different nozzles show significantly difference with 5% significance level. The residue levels $3.76{\sim}3.92mg\;kg^{-1}$ by fan or disk type is smaller than $4.52{\sim}4.92mg\;kg^{-1}$ by fan II or fan III. The residue levels of imidacloprid on perilla leaf were different depend on the spray nozzles type.