• Parasites, Hosts and Diseases
• /
• 제61권3호
• /
• pp.272-281
• /
• 2023

Chigger mites are the vector of scrub typhus. This study estimates the infestation status and ecological characteristics of chiggers on the chestnut white-bellied rat Niviventer fulvescens in Southwest China between 2001 and 2019. Chiggers were identified under the microscope, and infestation indices were calculated. The Preston's log-normal model was used to fit the curve of species abundance distribution. A total of 6,557 chiggers were collected in 136 of 342 N. fulvescens rats, showing high overall infestation indices (prevalence=39.8%, mean abundance=19.2, mean intensity=48.2) and high species diversity (S=100, H'=3.0). Leptotrombidium cangjiangense, Neotrombicula japonica, and Ascoschoengastia sifanga were the three dominant chigger species (constituent ratio=42.9%; 2,736/6,384) and exhibited an aggregated distribution among different rat individuals. We identified 100 chigger species, with 3 of them (Leptotrombidium scutellare, Leptotrombidium wenense, and Leptotrombidium deliense) as the main vectors of scrub typhus in China and nine species as potential vectors of this disease. Disease vector occurrence on N. fulvescens may increase the risk of spreading scrub typhus from rats to humans. Chigger infestation on N. fulvescens varied significantly in different environments. The species abundance distribution showed a log-normal distribution pattern. The estimated number of chigger species on N. fulvescens was 126 species.

• Animal Bioscience
• /
• 제37권8호
• /
• pp.1474-1482
• /
• 2024

Objective: The experiment aimed to determine the standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in 10 brown rice samples fed to pigs, and to construct predictive models for SID of CP and AA based on the physical characteristics and chemical composition of brown rice. Methods: Twenty-two cannulated pigs (initial body weight: 42.0±1.2 kg) were assigned to a replicated 11×3 incomplete Latin square design, including an N-free diet and 10 brown rice diets. Each period included 5 d adaptation and 2 d ileal digesta collection. Chromic oxide was added at 0.3% to all the diets as an indigestible marker for calculating the ileal CP and AA digestibility. Results: The coefficients of variation of all detected indices for physical characteristics and chemical composition, except for bulk weight, dry matter (DM) and gross energy, in 10 brown rice samples were greater than 10%. The SID of CP, lysine (Lys), methionine, threonine (Thr), and tryptophan (Trp) in brown rice was 77.2% (62.6% to 85.5%), 87.5% (80.3% to 94.3%), 89.2% (78.9% to 98.9%), 55.4% (46.1% to 67.6%) and 92.5% (86.3% to 96.3%), respectively. The best prediction equations for the SID of CP, Lys, Thr, and Trp were as following, SID_CP = -664.181+8.484×DM (R² = 0.40), SID_Lys = 53.126+6.031×ether extract (EE)+0.893×thousand-kernel volume (R² = 0.66), SID_Thr = 39.916+7.843×EE (R² = 0.41), and SID_Trp = -361.588+4.891×DM+0.387×total starch (R² = 0.85). Conclusion: Overall, a great variation exists among 10 sources of brown rice, and the thousand-grain volume, DM, EE, and total starch can be used as the key predictors for SID of CP and AA.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2728-2735
• /
• 2022

The research on the flow and heat transfer characteristics of lead bismuth(LBE) is significant for the thermal-hydraulic calculation, safety analysis and practical application of lead-based fast reactors(LFR). In this paper, a new CFD model is proposed to solve the thermal-hydraulic analysis of LBE. The model includes two parts: turbulent model and turbulent Prandtl, which are the important factors for LBE. In order to find the best model, the experiment data and design of 19-pin hexagonal rod bundle with spacer grid, undertaken at the Karlsruhe Liquid Metal Laboratory (KALLA) are used for CFD calculation. Furthermore, the turbulent model includes SST k - 𝜔 and k - 𝜀; the turbulent Prandtl includes Cheng-Tak and constant (Pr_t =1.5,2.0,2.5,3.0). Among them, the combination between SST k - 𝜔 and Cheng-Tak is more suitable for the experiment. But in the low Pe region, the deviation between the experiment data and CFD result is too much. The reason may be the inlet-effect and when Pe is in a low level, the number of molecular thermal diffusion occupies an absolute advantage, and the buoyancy will enhance. In order to test and verify versatility of the model, the NCCL performed by the Nuclear Thermal-hydraulic Laboratory (Nuthel) of Xi'an Jiao tong University is used for CFD to calculate. This paper provides two verification examples for the new universal model.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.531-544
• /
• 2013

Compared with pavement structures of ordinary road sections, pavement structures in the intersection are exposed to more complex traffic characteristics which may exacerbates pavement distresses such as fatigue-cracking, shoving, shear deformation and rutting. Based on a field survey about traffic characteristics in the intersection conducted in Shanghai China, a three dimensional dynamic finite-element model was developed for evaluating the mechanistic responses in the pavement structures under different traffic characteristics, namely uniform speed, acceleration and deceleration. The results from this study indicated that : (1) traffic characteristics have significant effects on the distributions of the maximum principal strain (MPS) and the maximum shear stress (MSS) at the pavement surface; (2) vehicle acceleration or deceleration substantially impact the MPS and MSS at pavement surface and could increase the magnitude of them by 20 percent to 260 percent; (3) in the vertical direction, with the increase of vehicle deceleration rate, the location of the MPS peak value and the MSS peak value changes from the sub-surface layer to the pavement surface.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.461-473
• /
• 2020

Natural rock mass contains defects of different shapes, usually filled with inclusions such as clay or gravel. The presence of inclusions affects the failure characteristics and mechanical properties of rock mass. In this study, the strength and failure characteristics of rock with inclusions were studied using the particle flow code under uniaxial compression. The results show that the presence of inclusions not only improves the mechanical properties of rock with defects but also increases the bearing capacity of rock. Circular inclusion has the most obvious effect on improving model strength. The inclusions affect the stress distribution, development of initial crack, change in crack propagation characteristics, and failure mode of rock. In defect models, concentration area of the maximum tensile stress is generated at the top and bottom of defect, and the maximum compressive stress is distributed on the left and right sides of defect. In filled models, the tensile stress and compressive stress are uniformly distributed. Failing mode of defect models is mainly tensile failure, while that of filled models is mainly shear failure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1635-1641
• /
• 2008

This study investigated the effects of solid-state fermentation of a compound pig feed on its microbial and nutritional characteristics as well as on pig performance and nutrient digestibility. A mixed culture containing Lactobacillus fermentum, Saccharomyces cerevisae and Bacillus subtilis was used for solid-state fermentation and solid-state fermented feed samples were collected on days 0, 1, 2, 3, 5, 7, 10, 15, 20 and 30 for microbial counts and chemical analysis. Lactic acid bacteria increased rapidly during the first three days of fermentation and then slowly declined until day 10 and, thereafter, the counts were maintained at about 6.7 log cfu/g for the duration of the fermentation period. Enterobacteria also increased during the first two days, and then fell below the detectable level of the analysis (3.0 log cfu/g). The pH of the fermentation substrate declined from 6.1 at the start of fermentation to 5.7 by day 30. The water-soluble protein content increased from 8.2 to 9.2% while the concentration of acetic acid increased from 16.6 to 51.3 mmol/kg over the 30-day fermentation. At the end of the 30-day fermentation, the solid-state fermented feed was used in a pig feeding trial to determine its effects on performance and nutrient digestibility in growing-finishing pigs. Twenty crossbred barrows ($14.11{\pm}0.77kg\;BW$) were allotted into two dietary treatments, which comprised a regular dry diet containing antibiotics and a solid-state fermented feed based diet, free of antibiotics. There was no difference due to diet on pig performance or nutrient digestibility. In conclusion, solid-state fermentation resulted in high counts of lactic acid bacteria and low counts of enterobacteria in the substrate. Moreover, feeding a diet containing solid-state fermented feed, free of antibiotics, can result in similar performance and nutrient digestibility in growing-finishing pigs to a regular diet with antibiotics.

• ETRI Journal
• /
• 제40권1호
• /
• pp.39-50
• /
• 2018

More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high-data-rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the "Mobile Hotspot Network" system, a three-dimensional ray tracer (RT) is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500-MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd-Generation-Partnership-Project-like stochastic channel generator. The necessary channel information can be practically realized, which can support the link-level and system-level design of the communication system in similar scenarios.

• Parasites, Hosts and Diseases
• /
• 제56권6호
• /
• pp.603-607
• /
• 2018

This study was carried out to determine the pathogen-causing diarrhoea in sheep Ovis aries in the Qinghai Tibetan Plateau Area, China. A trophozoite was identified as species of ciliate alveolates infecting the sheep based on morphological characteristics examined by microscope. It was mostly spherical, colourless and transparent, with many vesicles. Macronucleus and contractile vacuoles could not be distinguished. Size of the trophozoite was $80-180{\times}70-150{\mu}m$ and its surface was covered with cilia. Molecular analysis based on sequences of 18S rRNA and ITS genes confirmed the ciliate species as Balantidium coli. According to the literature, there have been many epidemiological investigations of B. coli infection in pigs, monkeys and humans. To our knowledge, this was the first report of B. coli infections in sheep in the Qinghai Tibetan Plateau Area of China, or eleswhere around the world. Importantly, the sheep case was rare but raised our concern that B. coli may spread across species and expand its host range.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1416-1428
• /
• 2021

Pebble flow characteristics can be significantly affected by the configuration of pebble bed, especially for HTGR pebble beds. How to achieve a desired uniform flow pattern without stagnation is the top priority for reactor design. Pebbles flows inside some specially designed pebble bed with arc-shaped contraction configurations at the bottom, including both concave-inward and convex-outward shapes are explored based on discrete element method. Flow characteristics including pebble retention, residence-time frequency density, flow uniformity as well as axial velocity are investigated. The results show that the traditionally designed pebble bed with cone-shape bottom is not the most preferred structure with respect to flow pattern for reactor design. By improving the contraction configuration, the flow performance can be significantly enhanced. The flow in the convex-shape configuration featured by uniformity, consistency and less stagnation, is much more desirable for pebble bed design. In contrast, when the shape is from convex-forward to concave-inward, the flow shows more nonuniformity and stagnation in the corner although the average cross-section axial velocity is the largest due to the dominant middle pebbles.

• Wind and Structures
• /
• 제35권1호
• /
• pp.21-34
• /
• 2022

Gust factor is an important parameter for the conversion between peak gust wind and mean wind speed used for the structural design and wind-related hazard mitigation. The gust factor of typhoon wind is observed to show a significant dispersion and some differences with large-scale weather systems, e.g., monsoons and extratropical cyclones. In this study, insitu measurement data captured by 13 meteorological towers during a strong typhoon Morakot are collected to investigate the statistical characteristics, height and wind speed dependency of the gust factor. Onshore off-sea and off-land winds are comparatively studied, respectively to characterize the underlying terrain effects on the gust factor. The theoretical method of peak factor based on Gaussian assumption is then introduced to compare the gust factor profiles observed in this study and given in some building codes and standards. The results show that the probability distributions of gust factor for both off-sea winds and off-land winds can be well described using the generalized extreme value (GEV) distribution model. Compared with the off-land winds, the off-sea gust factors are relatively smaller, and the probability distribution is more leptokurtic with longer tails. With the increase of height, especially for off-sea winds, the probability distributions of gust factor are more peaked and right-tailed. The scatters of gust factor decrease with the mean wind speed and height. AS/NZ's suggestions are nearly parallel with the measured gust factor profiles below 80m, while the fitting curve of off-sea data below 120m is more similar to AIJ, ASCE and EU.