• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.527-541
• /
• 2015

The purpose of this study is to investigate the changes in the inter-city passenger flows since adapting the express rail system in Korea(KTX). For the purpose, we analyze the express bus and rail passenger annual flow data of the before and after adapting KTX. In first, we examine the changes in the time-distance parameters in the inter-city passenger flows of the express bus, general rail, and KTX by applying gravity model. The results reveal that express bus passenger flows are less sensible to the time-distance compare to the rail passenger flows, and the trends have been intensified over time. However, the time-distance parameters for the KTX passenger flows reveal the reverse relationships with the gravity model. The KTX passenger flows expand between the long distance cities. We also apply the MST(Maximum Spanning Tree) method to find out the spatial structural changes in the inter-city passenger flows. The number of hierarchies has been increased in the express bus and general rail passenger flows, while single hierarchical structure has been lasted in the KTX passenger flows.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.75-82
• /
• 2005

To relieve congestion in the current system of intercity transportation, the Korea decided in 1990 to construct a high-speed railroad between Seoul and Busan and it is now in operation. This new mode of transportation significantly cut travel time between major cities and a trip from Seoul to the southeastern port of Busan. Since the KTX opening, average daily passenger numbers on both the Gyeongbu and Honam lines have increased about 1.3 fold over 2003 levels. As of December 2004, the KTX trains are carrying about 81,000 people a day. On KTX routes, the daily number of airline passengers dropped. Express long-distance bus traffic also dropped by 20% to 30%, while that on short-distance routes (100km or less) increased by about 20%. These figures clearly indicate that the Korean transportation network is becoming railroad-centric. However, the number of KTX passengers is fewer than anticipated possibly due to the Korean economic downturn and the operation of the KTX will leave many existing Saemaul and Mugunghwa train sets idle, which will be put into operation for areas, not covered by the KTX. When all the existing major lines have been electrified, more high-speed rail services will be phased in using direct connections to maximize operational efficiency. And also, the dual management by KTX and conventional rail will be regarded as the promotion of the benefit of the public.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.662-669
• /
• 2012

In 2004, KTX operated in Korea on the 5th in the world. But there are various factor on planed schedule delay of Big National Construction Project like Seoul-Busan High Speed Rail Project(Seoul-Busan HSR). For example, Often change of government policy, project management control problem of design and construction, conflict of interested party like environmental organization/resident are the main delay factors. The suggestions for improvement of the construction schedule through the Seoul-Busan HSR will help to make a new leap forward in rail construction.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.5
• /
• pp.1147-1154
• /
• 2016

Impact of Korea train express (KTX) on the regional economy in Korea has been studied by many researchers. Current research is limited in the lack of quantitative research using a statistical model to study the effect of KTX on regional economy. This paper analyses the influence of KTX to the household final consumption expenditure, which is one of important regional economic index, using spatial panel regression model. The spatial structure is introduced through spatial autocorrelation matrix using adjacency of KTX connection. The result shows a significant effect of Korea train express on the regional economy.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1164-1171
• /
• 2009

It has been 5 years since KTX high speed train was operated by KORAIL in Korea in April 2004. As for KTX train, France TGV was optimally renovated to make it, considering Korean geographical and environmental features. The research and development about KTX make it possible that train's exterior device design has the original design capability but, KTX train control & diagnosis design remains in the level of imitation. In order to analyze KTX train's diagnosis & control data, there are a collection method, using VME analysis device and method of analyzing control data structure and the operating and design capability about train control & diagnosis device should be secured. As the various high speed trains are operated in tracks, high speed train's safety driving and reduction of expense are necessary, by preparing in advance various train diagnosis & control which is indispensable to train operator. With the simplified train diagnosis & control design, Korean type high speed train's manufacture capability and operating capability should be improved and Korea's international status as a nation of operating high speed train should be established.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.756-760
• /
• 2009

In 2010, the second phase of Kyeongbu KTX high speed train construction is expected to be completed. Therefore KTX's fare system need to be further improved. In this study, analyze the present condition and problems whit applying the existing fare system into the second phase of KTX high speed train, and then suggests improvement measures that divide KTX's fare system with distance-based fare and service-based fare.

• Railway Journal
• /
• v.17 no.2
• /
• pp.6-18
• /
• 2014

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.183-190
• /
• 2009

In order to improve continuous success and stabilization of high-speed rail in the future, Using Frequency of high-speed rail should be enhanced by improving satisfaction of high-speed rail passenger. High-speed rail is needed to hold the priority in competition means by comparing the traits of service of domestic air lines. This study utilizes structural equation modeling to develop model for estimating factors influencing to service through conducting survey questionnaire. It also uses reliability analysis, correlation analysis, factor analysis to examine the rationalization of items and to establish hypothesis of this research. The results show that KTX contains 'inner service' item that is considered to be ameliorated and that domestic airline present low performance of 'outer service' item. In other words, moving section which partly is under a limited condition is needed to be improved. In addition, access to airport and transfer to other transportations have to be improved as they show the lowest satisfaction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2024

The majority of high-speed railway bridges along the domestic Gyeongbu and Honam lines feature a PSC-box type structure with a span length ranging from 35 to 40m, which typically exhibits a first bending natural frequency of approximately 4 to 5Hz. When KTX high-speed trains transverse these bridges at speeds ranging from 290 to 310km/h, the vibration induced by the trains approaches the first bending natural frequency of the bridge. Furthermore, with the upcoming operation of a EMU-320 high-speed train and the anticipated increase in the speeds of these high-speed trains, there is a need to analyze the dynamic response of high-speed railway bridges. For this, based on measured responses from actual railway bridges, a numerical model was constructed using a numerical model updating technique. The dynamic response of the updated numerical model exhibited a strong agreement with the measured response from the actual railway bridges. Subsequently, this updated model was utilized to analyze the dynamic response characteristics of the bridges when KTX and EMU-320 trains operate at increased speeds. The maximum vertical displacement and acceleration at the mid-span of the bridges were also compared to those specified in the railway design standard with the increasing speed of KTX and EMU-320.