• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.17-27
• /
• 2010

KSLV-I KM plume including alumina particle has been studied using the continuum solver. Alumina particles are assumed to have 7 different diameters, and the specific ratio of the plume gas is assumed to be 1.2, with which the internal nozzle flow characteristics are similar to those of the chemically equilibrium analysis results. The results showed that the expansion angle of the particles is smaller than that of the gas phase, and that the big sized alumina particles are gathered in the plume core and the expansion angles of the big sized particles are smaller than those of the light particles. When the emissivity of the particles are assumed to be 0.1, the radiative heat flux is equivalent to those measured during the flight test of KSLV-I.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.189-199
• /
• 2013

This paper summarizes results of second stage attitude control of KSLV-I third flight test. The results show that three axes attitude control at coasting phases of KSLV-I was successfully accomplished by the reaction control system, and pitch and yaw attitude control at thrusting phase where second stage kick motor burns was also normally accomplished by using the thrust vector control system. It is verified that the second stage controller performed successfully for all flight phases regardless of some disturbances due to mass center offset, slag effects, and residual thrust of kick motor. These results may provide an important basis in enhancing domestic technology level of attitude control of launch vehicle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.536-538
• /
• 2017

UHD high speed digital camera system will be installed around launch pad and launch complex tower to acquire high speed image for motion analysis of integral parts of launch vehicle during the lift-off of KSLV-II in the Naro space center. In this paper, We compared configuration of high speed digital camera system operating in the Naro space center with UHD high speed digital camera system for mission of KSLV-II.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.202-209
• /
• 2008

KSLV-1 2nd stage Kick Motor Nozzle was exposed to high temperature and pressure during the firing. Under the high pressure environment, Kick Motor Nozzle hydro-pressure test was done for verifying the structural safety of the nozzle. The differences with the KM hydro-pressure test [1] are that the real immerged heat resistance material is assembled and the throat heat resistance material is similar with the real one. The hydro-pressure tests were done for the two times of the 125 % of MEOP (975 psi) and the 153 % of the MEOP.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2017

In this paper, the liquid oxygen filling system (LOXFS) of the launch complex system of Korea Space Launch Vehicle-II (KSLV-II) is introduced based on critical design result by KARI in 2015 to 2016. The function and specification of the main systems of the liquid oxygen filling system, such as the storage tank, the drainage tank, the supply pumping system, the curved heat exchanger with liquid nitrogen, end valve block system, and umbilical connection, are presented.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.195-207
• /
• 2012

This paper deals with attitude controller design and integrated performance tests on the nitrogen gas reaction control system of KSLV-I. Some major factors which are necessarily required in designing a stabilizing controller of reaction control system are investigated, and the corresponding equations are given. Experimental configurations and test conditions for system level integrated performance tests of the KSLV-I nitrogen gas reaction control system are summarized. It is shown that, based on the experimental data, operational performances of nitrogen gas reaction control system can be analyzed in terms of gas consumption, thrusting force, time delay, and specific impulse. It is also shown that a conformance of the controller to flight can be evaluated. Finally the onboard controller of KSLV-I reaction control system is shown to perform normally with enough stability margin via the first flight test result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.567-575
• /
• 2011

The development of space launch vehicle is an important step to advance to developed countries in the space area. It is also so risky due to necessity of huge costs and longer development period. The accuracy of cost estimation is important to develop a space launch vehicle successfully and efficiently. It is also necessary to estimate production and operation cost in order to develop commercial space launch vehicle possessing competitiveness. In this paper, Korean factors to be able to reflect the current state of workforce, average working hours and technology readiness level in Korea were analyzed to estimate production and operation cost of space launch vehicles that are developed in Korea. Korean factors have been applied to production and operation cost estimation of KSLV-II based on TRANSCOST. We evaluated the competitiveness level of KSLV-II as the commercial launch vehicle in the commercial launch services market by comparing with cost per flight of foreign launch vehicles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.18-28
• /
• 2016

Numerical analysis was conducted as a preliminary study for evaluating the dual bell nozzle. For future parametric studies, a dual bell nozzle was designed, and thereafter inlet condition, turbulence model, and the number of optimum grids were determined. Dual bell nozzle was designed based on the KSLV-II first stage nozzle. Inlet condition was determined to frozen flow model of non-reacting eight species by comparing with the design values. SST $k-{\omega}$ model turned out to be suitable as turbulence model. About 150 thousand of the grids were selected after grid sensitivity tests. Based on the results determined in this study, we plan to investigate performance gain of the KSLV-II by adopting a proposed dual bell nozzle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.76-83
• /
• 2017

Korea Aerospace Research Institute(KARI) has been developing a new launch vehicle Korea Space Launch Vehicle-II(KSLV-II) with their own technology. Thus, it is required a new launch complex that corresponds to a new propulsion system of launch vehicle. Because widely changing of KSLV-II comparing with KSLV-I such as thrust of engine system, composition of vehicle staging, pneumo-hydraulic scheme of propulsion system, it is important to establishing appropriate ground support equipments for fuel(kerosene) filling. In this critical design process, specific supply line and specification of components are designed and the concept of kerosene filling is determined based on results of preliminary design. Also, plans of supply operation and prerequisite are established and operation algorithms are formed.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.122-128
• /
• 2005

A work breakdown structure of 3-staged launch vehicle has been developed during the preliminary design step of KSLV-I program. In the present paper, the background, the detailed contents, and the total structures of WBS have been studied. The management plan for WBS has been also provided.