• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2022년 정기학술대회 논문집
• /
• pp.203-204
• /
• 2022

본 논문에서는 공공기관에서 안전보건경영시스템으로 KOSHA-MS를 구축하여 유지하고 있습니다. 2022년 1월 27일 시행된 중대재해처벌법에 대한 준비와 대책을 수립하고 있으며, 공공기관 안전활동 수준평가, 공공기관 안전관리등급제 등 여러 평가를 받고 있습니다. 이에 안전보건경영시스템(KOSHA-MS) 규정에 중대재해처벌법과 관련법규의 연계와 공공기관 안전활동 수준평가, 공공기관 안전관리등급제까지 연계 방안을 연구하였다.

• 한국가스학회지
• /
• 제24권3호
• /
• pp.11-19
• /
• 2020

안전보건경영시스템은 기존 OHSAS 18001 및 KOSHA 18001로 양분화 되어 시행하고 있었으나, 2018년 3월 12일 국제표준인 ISO 45001이 제정됨에 따라 기존 OHSAS 18001은 ISO 45001로 변경되었고, 안전보건공단의 KOSHA 18001은 KOSHA-MS로 인증기준이 변경되어 새로운 인증기준으로 규격전환을 하게 되었다. 본 연구에서는 1999년도부터 국내에 도입된 안전보건경영시스템의 적용실태 분석과 ISO 45001 인증기준 및 KOSHA-MS 인증기준을 기존 시스템과의 비교·분석을 실시하여 규격전환 시 자율적인 안전보건경영시스템의 구축 활성화 방안을 제시하였다.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.1-12
• /
• 2021

Objective: The purpose of this study was to contribute to the prevention of occupational diseases through the development of an automatic analysis program for evaluating workers' exposure to hazardous chemical substances. Methods: The authors selected chemical substances that caused occupational disease in Korea and chemical substances that are frequently used in industrial sites as target substances for a GC-MS automatic analysis program. The target substances are organic compounds which can be measured by a passive sampler. The automatic analysis program was studied using various raw data obtained from GC-MS analysis for the target substances. Results: A total of 48 organic compounds that can be measured with a passive sampler were selected as target substances for the GC-MS automatic analysis program. The selected compounds included substances that caused occupational disease, substances related to C1 and D1 in special health examinations, and substances for which work environment measurements have been frequently conducted. The GC-MS automatic analysis program was developed by combining information mainly on retention time and mass spectrum. The GC-MS automatic analysis program is designed to analyze unknown samples by comparing the mass spectrum and retention time of the samples to those of reference materials. To evaluate the stability of the program, samples at about the 30-50% level of OELs were prepared and analyzed with the GC-MS automatic analysis program, resulting in stable results for all 48 organic compounds. Conclusion: An automatic analysis program for a total of 48 organic compounds was developed using a GC-MS system that can analyze organic compounds. Unknown samples that contain the 48 organic compounds can be automatically analyzed by the developed program. It is anticipated that it can contribute to the prevention of occupational diseases through an GC-MS automatic analysis program that can quickly provide workers with information on exposure to chemical substances.

• 신재생에너지
• /
• 제19권3호
• /
• pp.22-33
• /
• 2023

The number of fire and explosion accidents caused by pyrolysis oil and gas at waste plastic pyrolysis plants is increasing, but accident status and safety conditions have not been clearly identified. Therefore, the aim of the study was to identify the risks of the waste plastic pyrolysis process and suggest appropriate safety management measures. We collected information on 19 cases of fire and explosion accidents that occurred between 2010 and 2021 at 26 waste plastic pyrolysis plants using the Korea Occupational Safety and Health Agency (KOSHA) database and media reports. The mechanical, managerial, personnel-related, and environmental problems within a plant and problems related to government agencies and the design, manufacturing, and installation companies involved with pyrolysis equipment were analyzed using the 4Ms of Machines, Management, Man, and Media, as well as the System-Theoretic Accident Model and Processes (STAMP) methodology for seven accident cases with accident investigation reports. Study findings indicate the need for establishing legal and institutional support measures for waste plastic pyrolysis plants in order to prevent fire and explosion accidents in the pyrolysis process. In addition, ensuring safety from the design and manufacturing stages of facilities is essential, as are measures that ensure systematic operations after the installation of safety devices.

• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2022년 정기학술대회 논문집
• /
• pp.241-242
• /
• 2022

산업안전보건 관계법령의 강화와 중대재해처벌법의 시행으로 기존의 안전보건기준의 준수 개념에서 안전보건관리체계 구축으로 대한민국의 안전보건 패러다임이 바뀌었지만 안전보건경영시스템에 대한 접근은 인증항목별 구축의 관점에서만 접근이 이루어지고 실질적으로 시스템을 운영하는 사람을 중심으로한 접근은 미약하여 안전보건경영시스템 인증항목을 세부지표로 개발하여 본사와 현장 조직구성원들에게 설문을 통한 성과측정으로 건설관리자들의 안전보건경영시스템에 대한 인식수준을 파악하고자 함.

• 분석과학
• /
• 제20권4호
• /
• pp.268-278
• /
• 2007

값이 싸고 효과적인 항 부식제로서 수용성 금속가공유에 첨가되는 아질산염은 수용성 금속가공유에서 미생물 번식을 제어하기 위하여 첨가되는 아민류와 공존 시, 발암성 물질인 니트로소아민류를 생성한다. 본 연구에서는 금속가공, 자동차 부품 제조업 등을 중심으로 현장에서 수거한 금속가공유 원액 및 희석액 중 니트로소 화합물을 생성시키는 아질산염 및 질산염과 에탄올 아민류의 함량을 이온크로마토그라피를 이용하여 분석하고, GC/MS로 분석한 니트로소아민의 분석결과를 비교하여 우리나라 유통 수용성 금속가공유 중 니트로 화합물의 함유실태를 조사하였다. 21개의 금속가공유 희석액 시료 중 11개(52%)의 시료에서 아질산염이 검출되었으며 독일 기준치인 $20{\mu}g/mL$를 초과하는 시료는 3개(14%)였다. 21개의 희석액 중 18개의 희석액에서 니트로소아민(NDELA, N-nitrosodiethanolamine)이 검출되었는데 독일의 권고치인 $5{\mu}g/mL$를 초과하는 시료는 7개(33%)였다. 아질산염의 농도와 NDELA 농도는 $R^2=0.453$, n=19)의 상관성이 관찰되었다.

• 한국방재안전학회논문집
• /
• 제13권1호
• /
• pp.41-50
• /
• 2020

전문건설 업체의 안전보건경영시스템 도입·구축·운용은 안전시스템 도입과 운영 과정에 소요되는 비용이 발생하는 문제가 있다. 그리고 건설 안전 분야 기술 인력을 보유하지 못한 열악한 환경에서 안전시스템 구축 및 인증 취득 및 정착으로의 선순환 체계 구축이 쉽지 않은 실정이다. 이 논문의 목적은 건설업 안전보건경영시스템 관련 문헌을 조사·검토하고 실태 등 다양한 연구 동향을 분석하는 데 있다. 이를 통하여 건설업 안전보건경영시스템 구축 및 인증을 취득하고자 하는 전문건설 업체와 인증 취득 후 사후심사 및 연장심사를 이행 중인 전문건설업체의 안전보건경영시스템 수준 향상을 위한 방안을 모색하는데 있다.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.102-110
• /
• 2022

Objectives: The purpose of this study is to analyze the content of N,N-dimethylformamide(DMF) in polyurethane coated gloves(PU-gloves) and to assess the dermal exposure generated by wearing them. Methods: We analyzed the concentrations of DMF in 12 gloves by EN16778 standard. The samples cut into pieces of about 10 by 10 mm and extracted with methanol in flask in an ultrasonic bath at 70℃. An aliquot of the extract is analyzed with GC-MS. The dose of dermal exposure was calculated by ECETOC TRA consumer 3.1 and compared with derived no effect level(DNEL) for systemic effects due to long term exposure by workers. The extracted amount of DMF by saline solution was compared with that by EN16778 standard. Results: The mean concentration of DMF in PU-gloves was 1,377 mg/kg(range 13~3,948 mg/kg). The concentration of DMF showed significantly differences by packing type, manufacturer, and price(p<0.05). The dose of dermal exposure was 0.0007~0.572 mg/kg body weight/day when the DMF content was 10~4,000 mg/kg. The DMF extracted by saline solution was around 11% for 8 hours. Conclusions: The risk of dermal exposure due to the residual DMF in the PU-gloves was not signifiant. But, the limit of 1,000 mg/kg in PU-gloves can be recommended for international standard and trading systems.

• 한국산업보건학회지
• /
• 제23권3호
• /
• pp.250-260
• /
• 2013

Objectives: The aim of this study is to analyze the current status of the possession of measurement and analytical instruments among work environment monitoring organizations that have been designated by the Ministry of Employment and Labor (MoEL) in Korea. Methods: Data for measurement and analytical instruments were gathered by inspectors who had been assigned by the Korea Occupational Safety and Health Agency (KOSHA) and MoEL during the evaluation program for designated work environment monitoring service providers in 2012. Data for 11 monitoring instruments and nine analytical instruments were collected from 108 organizations. Basic data such as the type of service provides and the size of employment were also recorded by the inspector. Results: The total number of personal air samplers including high and low flow rates operated in Korea was 5,418, with average of 50.2. Average operation number of noise dosimeters was 35.0, while 3,780 dosimeters were used in 108 work environment monitoring organizations. There were 10,488 monitoring instruments in total. All service providers possessed at least one AAS and GC in their analytical laboratory. Total number of HPLC/MS was five, followed by ICP/MS of seven, with an average of 0.07. Conclusions: Based on the data, domestic work environment monitoring service providers possessed relatively reasonable measurement and analytical instruments. Nearly all instruments had been imported from advanced countries such as USA, UK and Japan. Periodic gathering of data on these instruments may help maintain good workplace monitoring results and the health of workers at the sites.

• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.14-17
• /
• 2024

Objectives: This is a case of air exposure assessment conducted after researchers complained of headaches and odor due to residual substances from fire extinguishing agents spread throughout the laboratory due to a malfunction of the fire extinguishing facility. Methods: A component analysis was conducted on the residual substances of a fire extinguishing agent spread in a laboratory using Py-GC-MS (pyrolysis gas chromatography mass spectrometry) at the research institute's own central equipment research center. As a result of the component analysis, several types of substances were detected. Among these, five types of substances subject to work environment measurement in the aromatic hydrocarbon series, which can affect headaches and odor, were selected as substances subject to exposure assessment in the air, and the measurement and analysis methods of the target substances were conducted in accordance with the KOSHA Guide for each substance. Conclusions: The measurement results showed that all 5 types of substances were not detected at locations A, B, and C. This is believed to be the result of the residual substances in the fire extinguishing agent being measured when approximately two months had elapsed after being exposed to the test bench, and the substances already exposed had volatilized and disappeared. In this survey, it is believed that the measurement process is more important than the measurement results.