• Phonetics and Speech Sciences
• /
• v.4 no.1
• /
• pp.3-11
• /
• 2012

The aim of this paper is to examine the phonetic realizations of English unstressed vowels produced by advanced Korean learners (KLs) of English compared with English native speakers (NSs) focusing on the comparative study of English words and English loanwords. The result shows that KLs are usually not native-like in producing the English unstressed vowel /ə/ and loanword orthography affects the way the KLs produce /?/. The vowel quality of the unstressed vowels produced by the KLs is different from that of the NSs. In duration and pitch, KLs show significantly less difference between the stressed and unstressed vowels than do the NSs. The KLs usually have a high pitch in the stressed and the last syllable while the NSs usually produce peak F0 in the stressed syllable. When the KLs have a similar vowel quality with that of the NSs, they produce a shorter duration of the unstressed vowels. However, there is no correlation between the realization of the pitch and the vowel quality in KLs speech.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.7
• /
• pp.53-63
• /
• 2015

For the success of future missions to the Moon and other similar cosmic environments, understanding and utilization of the lunar regolith has become essential. However, due to the scarcity and unaffordability of real lunar regolith on Earth, a number of lunar regolith simulants (e.g., JSC-1; NASA) have been developed for experimental purposes. However, Korea does not have its own lunar regolith, even though the country is planning to actively pursue lunar and space missions in the 2020s. Thus, this study has been conducted to develop a Korean lunar simulant prototype via basic feasibility attempts (e.g., raw material selection, particle size and chemical composition simulation). Finally, the first prototype of Korea's own lunar simulant has been obtained, and denominated as KLS-1.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.8
• /
• pp.17-25
• /
• 2020

Korea Institute of Civil Engineering and Building Technology has constructed a large scale Dust Thermal Vacuum Chamber to simulate extreme lunar terrestrial environments and to study the Moon as an outposts for space development and exploration. Although a large amount of KLS-1 (Korean Lunar Simulant-1) is required for research, its massive production is practically difficult. This paper describes semi-automatic manufacturing system for massive production of KLS-1 in detail, which is seven times more efficient than manual production. In addition, to increase the similarity with lunar regolith, hydrogen reduction reaction using ilmenite which is one of the minerals was also conducted to simulate nanophase Fe(0) which is the unique property of lunar regolith. As a result, it was found that np-Fe(0) was formed at a temperature of 700℃ or higher, and increased in proportion to the temperature until 900℃.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.51-58
• /
• 2021

South Korea, as the 10th country to join the Artemis program led by NASA, is actively supporting various researches related to the lunar exploration. In particular, the utilization of water as a resource in the Moon has been focused since it was discovered that ice exists at the lunar pole as a form of frozen soil. Information on the thermal conductivity of lunar regolith can be used to estimate the existence for ice water extraction by thermal mining. In this study, the vacuum pressure effect on thermal conductivity of KLS-1 was investigated with a DTVC (Dusty Thermal Vacuum Chamber). The reliability of KLS-1 was reconfirmed through comparison with thermal conductivity of known standard lunar regolith simulants such as JSC-1A. An empirical equation to assess thermal conductivity considering dry unit weight and vacuum pressure was proposed. The results from this study can be implemented to simulate lunar cryogenic environment using the DTVC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.1
• /
• pp.10-15
• /
• 1990

These experiments were conducted to investigate the effect of day length on some chracteristics and seed weight in the soybean cultivars. Those were classified into three type's of seed weight with delaying seeding date in the previous paper. Flowering was delayed as the longer day length was employed. When the length became longer. the number of leaves at flowering greatly length of main stem and the number of nodes at maturity greatly increased. The seed weight decreased when the day length was longer than 14 hours. Negative correlation was obtained between seed weight and day length. There was negative correlation between seed weight and the number of days required to flowering, and length of main stem and the number of nodes at maturity. Type I cultivars decreased in seed weight when the day length was longer than 16 hours, but this trend was found to be clear with type II cultivars. Type III cultivars decreased in seed weight with increasing the day length.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.699-703
• /
• 1988

Cooking properties of one variety(Bongui) and two cultivars(KW-12 and KLS-77005-1) were compared. Soybeans were presoaked in distilled water at room temperature for 16 hr and cooked in an autoclave at $106^{\circ}C{\sim}121^{\circ}C$. The cooking rate was calculated by the maximum cutting force of the cotyledons. The cooking time for all cultivars were 150 min at $106^{\circ}C$ and 14 min at $121^{\circ}C$. The cooking rate constants were similar among cultivars. The z-value which was calculated from the time-temperature combinations that gave the same degrees of cooking for KW-12 was $13.1^{\circ}C$ and the others being $11.5^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.693-703
• /
• 2017

Rover wheel's mobility depends on soil's condition and wheel's design. The purpose of this study is to evaluate the effect of soil conditions, which are Jumunjin sand and Korean lunar soil simulant (KLS-1), on wheel's motion performance. The experiments were performed by using a single wheel testbed with a wheel which grouser height is 15mm on Jumunjin sand and KLS-1, respectively. Also the influence of grouser length to wheel's mobility performance was studied. The experimental results of torque, drawbar pull and sinkage relating to slip ratio were discussed and analyzed to evaluate wheel's motion performance. Results showed wheel moving on KLS-1 has high performance than Jumunjin sand. Wheel's mobility performance was influenced by soil's properties of cohesion and frictional angle. In addition, wheel's performance of drawbar pull and Torque increased with the increasing of grouser length.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.5-17
• /
• 2021

The Moon has been an attractive planet as an outpost for deep space exploration since He-3 and water ice which can be used as energy resources were discovered. In-Situ Resource Utilization (ISRU) construction material fabrication method is required for sustainable space planet exploration. In this paper, the possibility of microwave sintering technology for construction material fabrication was evaluated using lunar regolith that can be easily collected from the Moon surface. Experimental assessment of the influence factors on microwave sintering was conducted using a hybrid sintering system for efficient processing. The heat distribution in the furnace was observed using thermal paper that is coated with a material formulated to change color when exposed to heat. Based on this result, sintered cylindrical KLS-1s with a diameter of 1 cm and a height of 2 cm were fabricated. Densities were measured for the sintered KLS-1s under rotating turntable conditions that have an effect of microwave dispersion. The more dielectrics were arranged, the more microwaves were dispersed reducing the heat concentration, and thus a uniformity of sintered KLS-1s was enhanced.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.97-108
• /
• 2016

Lunar rover plays an important role in lunar exploration. Especially, performance of rover wheel related to interaction with lunar soil is of great importance when it comes to optimization of rover's configuration. In this study, in order to investigate the motion performance of lunar rover's wheel on Korean Lunar Soil Simulant (KLS-1), a single wheel testbed was developed and used to carry out a series of experiments with two kinds of wheel with grousers and without grousers which were used to perform the experiments. Wheel traction performance was evaluated by using traction parameters such as drawbar pull, torque and sinkage correlated with slip ratio. The results showed that the single wheel testbed was suitable for evaluation of the performance of wheel and rover wheel with grousers which was likely to have higher traction performance than that without grousers in Korean Lunar soil simulant. The experimental results could be utilized in verification of the optimum wheel design and effectiveness of wheel traction for Korean lunar rover.

• Parasites, Hosts and Diseases
• /
• v.36 no.1
• /
• pp.47-54
• /
• 1998

Small subunit ribosomal RNA (SSU rRNA) gene nucleotide sequences of bovine ReiLerin isolates from Korea (KLS and KCB) and japan (JHS) were determined. The genes from each isolate were amplified by the polymerase chain reaction and the approxi- mately 1.8 kb product cloned and sequenced by a modified dideoxynucleotide method. Overlapping gene segments produced with a series of primers were sequenced, resoRting in a complete DNA sequence for both forward and reverse strands of the SSU rRNA genes of each isolate. SSU rRNA gene sequences (termed Type A) were identical among the bovine ReiLeri,n isolates from Korea and the isolate from Japan. A GenBank data library homolo- gy search showed the sequence to be the same as that listed as leiLeyia buKeLi isolated from cattle in Marula, Kenya.