• 제목/요약/키워드: KG103

검색결과 392건 처리시간 0.026초

저구릉(低丘陵) 곡간지(谷間地) 답토양(沓土壤)(지산통(芝山統)과 용지통(龍池統))의 특성(特性)과 시비반응(施肥反應)에 관(關)한 연구 (Studies of the soil characteristice and NPK fertilizer response of local valley paddy soils in rolling lands(Jisan and Yongji series))

  • 류인수;신용화;이형태
    • 한국토양비료학회지
    • /
    • 제9권4호
    • /
    • pp.235-244
    • /
    • 1976
  • 1964~1969년간(年間) 농가포장(農家圃場)에서 실시(實施)한 3요소(要素) 및 개량제효과(改良劑效果) 시험중(試驗中)에서 곡간저구릉지(谷間低丘陵地)에 분포(分布)한 식양질(埴壤質)의 논 토양(土壤)인 지산통(芝山統)(배수(排水) 약간 불량(不良))과 용지통(龍池統)(배수(排水) 약간 양호(良好))에 대(對)한 시험결과(試驗結果)를 비교분석(比較分析)하여 다음과 같은 결과(結果)를 얻었다. 1. 평균(平均) 정조수량에서 무비구(無肥區)와 시비구중(施肥區中) 최고(最高) 수량(收量)은 각각(各各) 용지통(龍池統) 319, 507kg/10a이고 지산통(芝山統) 396, 567kg/10a이었다. 두 토양간(土壤間)의 현저한 생산력차이(生産力差異)는 지산통(芝山統)이 개답년대(開畓年大)가 긴 숙답(熟畓)인 반면(反面) 용지통(龍池統)은 반숙답(半熟畓)이라는 점(點)에 연유(然由)된 것이라고 보았다. 2. 표토(表土)의 평균(平均) 화학적(化學的) 성질(性質)에 있어서는 지산통(芝山統)은 CEC 12.8m.e, Exch. Ca 6.5m.e, OM3.9%이고 용지통(龍池統)은 CEC 10.4m.e, Exch. Ca 4.7m.e, OM 3.2% 이었고 유효(有效) $P_2O_5$ 함량(含量)은 전자(前者)가 64, 후자(後者)가 103ppm이었다. 3. 용지통(龍池統) 및 일부(一部) 비옥도(肥沃度)가 낮은 지산통(芝山統)에 속(屬)하는 답토양(畓土壤)들의 지력증진(地力增進)을 위하여 심경(深耕)과 유기물(有機物) 및 석회(石灰)와 고토(苦土) 시용(施用)이 유효(有效)할 것으로 보았다. 4. 질소반응(窒素反應)에서는 일반적(一般的)으로 지산통(芝山統)은 다질소수준(多窒素水準)에서도 수량증감폭(收量增減幅)이 적어서 비교적(比較的) 다비안전성(多肥安全性)인 반면(反面) 용지통(龍池統)은 동질소하(冬窒素下)에서 급격히 수량감소(收量減少)가 크다. 그러나 두 토양(土壤) 공(共)히 유기물함량(有機物含量) 3% 이하(以下)의 토양(土壤)들은 다질소수준(多窒素水準)에서 수량감소(收量減少)가 컸으며 3% 이상(以上)의 토양(土壤)은 다비(多肥)에 안전(安全)한 경향(傾向)을 보였다. 5. 일반품종(一般品種)에 대(對)한 질소적량(窒素適量)은 지산통(芝山統)에서 8~9kg/10a, 용지통(龍池統)에서 10~11kg/10a이었으며 질소(窒素) 1kg의 생산능률(生産能率)은 지산통(芝山統) 12kg 용지통(龍池統) 13㎏정도이었다. 6. 인산효과(燐酸效果)는 질소시비수준(窒素施肥水準)에 따라 다르나 각(各) 토양(土壤)의 질소적량수준선(窒素適量水準線)에서 인산적량(燐酸適量)은 용지통(龍池統) 6kg, 지산통(芝山統) 3kg이었다. 지산통(芝山統)의 유효인산함량(有效燐酸含量)(64ppm)이 낮음에도 불구하고 인산적량(燐酸適量)이 용지통(龍池統)(110ppm) 보다도 낮은 이유(理由)는 재배기간중(栽培期間中) 토양환원(土壤還元)의 발달(發達)이 용지통(龍池統) 보다도 심(甚)하여 토양인산(土壤燐酸)의 유효화율(有效化率)이 크기 때문이라고 생각되었다. 7. 가리비효(加里肥效)도 질소수준(窒素水準)에 따라 차이(差異)가 있었다. 용지통(龍池統)에서는 N 8kg/10a 수준(水準)에서 가리시비량(加里施肥量)들이 증가할수록 현저(顯著)히 감수(減收)되었고 다질소수준(多窒素水準)일수록 가리(加里) 비효(肥效)가 컸으며 지산통(芝山統)에서는 어느 질소수준(窒素水準)에서나 가리비효(加里肥效)가 나타났다. 각(各) 토양(土壤)의 적량(適量) 질소수준(窒素水準)에서 가리적량(加里適量)은 각각(各各) 8kg 정도이었다. 8. 3 요소(要素)의 시비량화율(施肥量比率)은 N:$P_2O_5$:K를 용지통(龍池統)에서는 1(11kg/10a):0.6:0.6, 그리고 지산통(芝山統)에서는 1 (8kg/10a):0.4:1이 좋은 것으로 보았다.

  • PDF

생봉독처리에 의한 비육돈의 사양성적

  • 조성구;최양일;조현정;박기수;임민혁;장경순
    • 한국축산식품학회:학술대회논문집
    • /
    • 한국축산식품학회 2005년도 제36차 추계 학술발표대회
    • /
    • pp.111-114
    • /
    • 2005
  • 1. 증체량 이유자돈 시부터 비육돈 완성기간까지 비육 전체 기간동안의 증체량은 다음과 같이 분석되었다. 처리별 암컷의 증체량은 생봉독처리 2구에서 99.08kg으로 가장 높았고, 생봉독처리 1구에서 99.08kg, 무처리구에서 95.88kg, 생봉독처리 3구에서 93.50kg 순으로 최고치와는 5.58kg의 차이를 보여주었으며 대조구와는 3.2kg 증체량이 높아 3.3% 증체율이 높았다. 거세돈에서의 처리별 증체중은 생봉독 처리 2구에서 102.23kg으로 가장 높았고, 다음은 생봉독처리 1구에서 101.79kg, 무처리구에서는 88.96kg, 생봉독 3처리구에서는 95.76kg의 순으로 나타냈다. 따라서 최고치와 최저치의 차이는 6.47kg으로 유의한 수준차(p<0.05)로 나타났으며 대조구보다는 3.2kg의 증체량 차이로서 암컷과 같은 수준으로 나타났다. 2. 사료효율 비육 전체기간 동안의 처리별 암수간 평균 두당 사료섭취량과 사료효율은 다음과 같다. 암컷의 평균 사료효율은 생봉독 처리 1구에서 2.55로 처리구중에서 가장 우수하였고, 다음은 생봉독처리 2구와 대조구에서 2.56으로 동일하게 분석되었으며, 생봉독 3처리구에서 가장 저조한 2.62의 순으로 분석되어 사료효율 0.07 차이로 2.3%의 차이를 보여주었다. 발육성적이 가장 높은 생봉독 2처리구에서는 255kg의 사료를 섭취하여 2.54의 최적의 사료효율을 보여주어 사료 효율면에서도 생봉독 2처리구에서 가장 경제성이 높은 것으로 분석되었다. 3. 육성율 및 생산지수 폐사수는 생봉독 처리 3구에서 2두(자웅 각 1두)가 발생하여 육성율 95%로 처리구중에서 가장 저조하였고, 다음은 대조구 1두가 발생하여 육성율 97.5%를 보여주었는데 비하여 생봉독처리 1구와 2구에서는 폐사돈이 발생하지 않아 육성율 100%를 보여주었다. 생산지수는 대조구를 100으로 기준하였을 때 생봉독처리 2구에서 107.87로 가장 우수하였으며, 생봉독 처리 1구에서 106.22, 가장 저조한 처리구는 폐사수가 많은 생봉독 처리 3구에서 94.73으로 나타내었다. 이상과 같이 생봉독 처리 2구에서 가장 우수한 생산효과를 나타내었다. 4. 생산성 향상 효과 처리별 대조구(100) 대비 사료섭취량은 생봉독 처리 3구에서 97.22로 가장 낮았고, 기타 처리구는 1.19${\sim}$1.59의 처리를 보이고 있는데 비하여, 대조구(100) 대비 증체율에서는 생봉독 처리 2구에서 103.30으로 3.30%가 높았다.

  • PDF

전처치 기간에 따른 흰쥐의 조직내 카드뮴 및 metallothionein 생성에 관한 연구 (A Study on the Concentrations of Cadmium and Metallothionein in the Tissues of Rats in Relation to the Duration of Pretreatment)

  • 김남송
    • Toxicological Research
    • /
    • 제13권1_2호
    • /
    • pp.103-110
    • /
    • 1997
  • This study was performed to investigate the effects of cadmium chloride on the acute and chronic toxicity on rats. Several toxic effects of cadmium has been shown following short-term and longterm pretreatment with cadmium and zinc. Four groups of rats (A, B, C, D), each consisting of 16 rats, were studied and each group was divided into four subgroups (1, 2, 3, 4), 4 rats for each subgroup. Rats were subcutaneously pretreated with $CdCl_2$ (0.5 mg/kg, A & C), and $ZnCl_2$ (13.0 mg/kg, B & D) during time periods of 1 weeks (group A & B) and 6 weeks (group C & D). At the end of the period, rats were challenged with $CdCl_2$ (3.0, 6.0 and 9.0 mg/kg, i.p.). After giving the challenge dose, cadmium and metallothionein(MT) concentrations were determined. The concentrations of cadmium were higher in the liver than the kidney irrelevantly to cadmium and zinc pretreatment and increased dose-dependently to the challenge dosage. The metallothioneins showed higher concentrations in the liver than the kidney following cadmium pretreatment and were higher in the long-term pretreatment groups than the short-term pretreatment groups in the liver and the kidney of rats. These data suggest that metallothioneins are induced preferentially in the liver by pretreatment of cadmium and then, formed in the form of Cd-MT, may play an important role in the nephrotoxicity.

  • PDF

수유기간별 영아의 모유섭취량 및 Na, K의 섭취량 (Milk, Sodium and Potassium Intaken of Breastfed Infants During Lactation)

  • 조금호
    • Journal of Nutrition and Health
    • /
    • 제28권7호
    • /
    • pp.612-619
    • /
    • 1995
  • This study was to investigate the intake of human milk, sodium and potassium of breast-fed infants at 7, 15, 30, 60 and 90 days postpartum. Milk samples were obtained from 20 healthy lactating women living in In-Cheon area. Milk intakes of 20 breastfed infants were determined by the test-weighing method and soldium and potassium contents of human milk were analyzed by Atomic Absorptin Spectrophotometer after Wet-Digestion. Infant milk intakes per day tended to increase during lactation. The mean($\pm$SD) intakes at 7, 15, 30, 60 and 90 day were 460(164), 547(202), 626(199), 718(139) and 688(162)g/day, respectively. The sodium contents decreased significantly from 9.7(1.1)mEq/kg at 7 day to 6.3(1.8)mEq/kg at 90 day(p<0.05). The sodium intakes of infants were 100.8(39.6), 103.3(46.7), 107.2(47.9), 115.5(41.5) and 105.2(41.2)mg/day, respectively and average intake was 107.2(43.9)mg/day. The potassium contents were ranged from 10.5(1.3) to 13.3(2.3) mEq/kg and the potassium intakes of infants were 241.8(11.2), 267.8(98.8), 314.1(98.6), 318.0(66.1) and 276.1(62.6)mg/day, respectively and average intake was 288.3(91.8)mg/day. The mean sodium and potassium intakes of infants between boys and girls were not significantly different at 5% level.

  • PDF

가지 격리상재배시 급액량이 생육 및 수량에 미치는 영향 (Effect of Amount of Nutrient Solution Supply on the Growth and Yield in Isolated Bed Culture of Eggplant)

  • 김주;장익;최동칠;정종성;김치선;최정식;최영근;배종향
    • 한국생물환경조절학회:학술대회논문집
    • /
    • 한국생물환경조절학회 2003년도 춘계 학술대회 논문집
    • /
    • pp.98-103
    • /
    • 2003
  • 우리나라의 가지 재배면적은 1970년 2,815ha이었던 것이 그 후 점차 줄어들어 2001년은 866ha가 재배되고 있고, 시설재배면적은 1970년 27ha로 전체면적의 1%도 채 안되는 매우 적은 면적이었으나 2001년에는 전체면적의 33%에 가까운 284ha가 재배되고 있다. 연간 총생산량으로 보면 1970년에 비하여 큰 차이가 없다. 이는 노지재배의 10a당 수량이 적을 때는 892kg 많을 때는 2,782kg 이나 시설재배의 10a당 수량은 1,617-4,294kg으로 노지재배에 비해 시설재배의 수량이 많기 때문이다(M.A.F. 2001). (중략)

  • PDF

내부금속관 형태에 따른 도재전장금관의 파절강도와 도재색조에 관한 연구 (A STUDY ON FRACTURE STRENGTH AND COLOR BY THE DESIGN OF METAL COPING IN CERAMO METAL CROWN)

  • 이명호;전영찬
    • 대한치과보철학회지
    • /
    • 제30권1호
    • /
    • pp.103-124
    • /
    • 1992
  • The purpose of this study was to investigate the effect on the fracture strength and color of ceramic by the design of the metal coping in ceramo metal crown. In this study, four types of ceramic crowns were made for fracture strength : standard ceramo metal crown, collariess ceramo metal crown, modified ceramo metal crown, and ceramic jacket crown. And three types of disk formed-specimens were made to compare the dentin shade owing to aluminous opaque powder and palladium alloy. Fracture strength was measured by universal testing machine(Instron Co. Ltd., U.S.A) and color was measured by color and color difference meter(Yasuda Seiki Seisakusho, Ltd., Japan). The results were as follows : 1. The fracture strength of ceramic was affected significantly by the design of metal coping in ceramo metal crown. The mean fracture strength(192.0 Kg) of standard ceramo metal crown was about 1.7 times higher than that(111.5 Kg) of collarless ceramo metal crown, and about 2.8 times higher than that(67.8 Kg) of ceramic jacket crown. 2. Modified ceramo metal crown that has metal band in the labio cervical had the lowest fracture strength. 3. Lightness, yellowness and redness of the dentin fired were decreased by the metal coping.

  • PDF

2003년 하계 진해만 수질 개선을 위한 생태계 모델링 (Ecosystem Modelling for Improvement Summer Water Quality of Jinhae Bay in 2003)

  • 홍석진;이원찬;정래홍;오현택;장주형;구준호;김동명
    • 해양환경안전학회지
    • /
    • 제13권2호
    • /
    • pp.103-110
    • /
    • 2007
  • 2003년 하계 진해만의 수질개선을 위한 육상오염물질 삭감량을 산정하기 위해 생태계 모델을 적용하였다. 모델에 의해 재현된 진해만의 수질은 마산만 측의 내측에서 해양수질 등급 III을 상회하는 수준으로 나타났으며, 등급 II의 수질로 개선하기 위해서는 육상부하를 50% 삭감하는 것이 효율적인 것으로 나타났다. 진해만 전 해역을 목표수질인 화학적 산소요구량 (COD) 농도 2.0mg/L을 만족하는 조 건은 전체 육상부하의 $70\sim90%$를 삭감하거나, 전체 육상부하와 저질 용출부하의 50%를 동시에 삭감하여야 하는 것으로 나타났다. 해역 II등급을 유지하기 위해 삭감해야 할 양은 유기물과 영양염을 동시에 삭감할 경우, 유기물 (COD) 5,632kg/day, 용존무기인 481kg/day 및 용존무기질소 7,991kg/day이며, 이 때 오염부하량의 한계 즉, 환경용량은 화학적산소요구량 부하 13,112kg/day, 용존무기인 206kg/day 그리고 용존무기질소 3,425kg/day 이라고 할 수 있다.

  • PDF

횡성호 유역의 비강우시 및 강우시 오염물질 유출특성 (Characteristics of Pollutants Discharge from Hoengseong Watershed during the Dry and Rainy Seasons)

  • 노성덕;김장현;이대근;김선주;손병용;전양근
    • 한국물환경학회지
    • /
    • 제22권4호
    • /
    • pp.695-705
    • /
    • 2006
  • This study was carried out to make a basic information for establishment of countermeasures against water pollution of Hoengseong watershed, accordingly we investigated the characteristics of pollutants discharge and estimated the unit loads from Hoengseong watershed. Seven sites (S1~S7) were selected for sampling and samples were taken 4 times during the dry and rainy seasons, respectively. During rainfall events, measured site mean concentration (SMC) ranges of $BOD_5$, $COD_{Mn}$, TOC, SS, Turbidity, T-N and T-P were 0.8~1.3 mg/L, 2.3~6.3 mg/L, 1.284~2.110 mg/L, 3.4~69.3 mg/L, 2.36~52.68 NTU, 1.243~1.669 mg/L and 0.025~0.070 mg/L, respectively. And the calculated annual unit loads of $BOD_{5}$, $COD_{Mn}$, SS, T-N and T-P in Hoengseong watershed were 1.327 kg/ha/yr, 7.349 kg/ha/yr, 87.075 kg/ha/yr, 1.848 kg/ha/yr and 0.103 kg/ha/yr, respectively. It was difficult to directly compare the unit loads proposed in this study with the estimated existing those. Because the unit loads in this paper were estimated not by land use types, but by complex land use of non-urban area. From the survey results, they showed that the unit loads in Hoengseong watershed were similar to those exisiting in the forest area, and showed lower than those existing in the paddy/dry field.

EFFECTS OF CIMATEROL ON THE GROWTH PERFORMANCE, CARCASS CHARACTERISTICS AND TISSUE METABOLISM IN BROILER CHICKS FED DIFFERENT DIETARY ENERGY

  • Kim, Y.G.;Han, I.K.;Ha, J.K.;Choi, Y.J.;Lee, M.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제7권1호
    • /
    • pp.103-112
    • /
    • 1994
  • This study was a sequential experiment consisting if feeding trial and in vitro culture studies. Feeding was conducted by $2{\times}2{\times}2$ factorial design with two cimaterol levels (0, 0.25 mg/kg), two energy levels (3,200, 2,900 ME kcal/kg) and two sexes. In starting period (0-21 days) broilers were fed diets containing two energy level without dietary supplementation of cimaterol. During finishing period (21-42 days) cimaterol groups were fed cimaterol supplemented diets. In vitro cultures were carried out to study the cellular metabolism of protein and fat in liver and adipose tissues prepared from chicks used in feeding trials. Body weight gain was significantly improved by the administration of cimaterol to experimental diets by 2.4% (p < 0.05). Feed intake was reduced by cimaterol administration at the high energy level, but this trend was reversed at low energy level. Feed efficiency was improved by cimaterol administration and at high energy level the difference (5.7%) was significant(p < 0.05). The administration of cimaterol had no effects on percentage of abdominal fat content, giblet and neck. There was little difference in carcass yield between control and cimaterol treated group. The administration of cimaterol had no effects on nutrient metabolizability or carcass composition. The results of in vitro studies with liver tissues showed that cimaterol increased the lipolytic activities (p < 0.05) and decreased lipogenic activities (p < 0.05). In in vitro studies with acinar cell of liver tissues. cimaterol increased the amount of retained protein and decreased secreted protein at high energy level. but the trend was opposite at low energy level.

An experimental study on fire resistance of medical modular block

  • Kim, Hyung-Jun;Lee, Jae-Sung;Kim, Heung-Youl;Cho, Bong-Ho;Xi, Yunping;Kwon, Ki-Hyuck
    • Steel and Composite Structures
    • /
    • 제15권1호
    • /
    • pp.103-130
    • /
    • 2013
  • Fire performance and fire safety of high-rise buildings have become major concerns after the disasters of World Trade Center in the U.S. in 2001 and Windsor tower in Spain in 2005. Performance based design (PBD) approaches have been considered as a better method for fire resistance design of structures because it is capable of incorporating test results of most recent fire resistance technologies. However, there is a difficulty to evaluate fireproof performance of large structures, which have multiple structural members such as columns, slabs, and walls. The difficulty is mainly due to the limitation in the testing equipment, such as size of furnace that can be used to carry out fire tests with existing criteria like ISO 834, BS 476, and KS F 2257. In the present research, a large scale calorie meter (10 MW) was used to conduct three full scale fire tests on medical modular blocks. Average fire load of 13.99 $kg/m^2$ was used in the first test. In the second test, the weighting coefficient of 3.5 (the fire load of 50 $kg/m^2$) was used to simulate the worst fire scenario. The flashover of the medical modular block occurred at 62 minutes in the first test and 12 minutes in the second test. The heat resistance capacity of the external wall, the temperatures and deformations of the structural members satisfied the requirements of fire resistance performance of 90 minutes burning period. The total heat loads and the heat values for each test are calculated by theoretical equations. The duration of burning was predicted. The predicted results were compared with the test results, and they agree quite well.