• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.4
• /
• pp.235-244
• /
• 1976

Following results are obtained by re-evaluating N. P. K. and soil improvement trials conducted from 1964 to 1969 in valley paddy soils in rolling lands (Jisan-series, imperfectly drained and Yongji-series, moderately well drained). 1. Average grain yield of rice in no fertilizer plots and the highest yield plots for Yongji-series (31 experiments) were 319 and 507kg/10a respectively, and that of Jisan-series (15 experiments) were 396 and 567kg/10a respectively. The fertility difference between two series may have been a result of the cultivation history. Jisan-series is a mature soil which has a long cultivation history and Yongji-series is sub-mature soil 2. Soil chemical characteristics for Jisan-series are charaterized by 12.8meq/100g in CEC, 6.5meq/100g in exchangeable Ca, 3.9% in OM, and 64 ppm in available $P_2O_5$ For Yongji-series they were 10.4meq/100g in CEC, 4.7meq/100g in exchangeable Ca, 3.2% in OM and 103ppm in available $P_2O_5$. 3. Deep plowing and application of organic matter and lime are expected to be effective in increasing fertility level of soils of Yongji-series. The same will be effective in some soils of Jisan series where the fertility level is low. 4. Jisan-series shows high response to nitrogen, while Yongji series shows sharp decrease in rice yield at the high levels of nitrogen. Both series, however, showed high response to nitrogen only when the OM level was higher than 3%. 5. The optimum level of nitrogen was 8~9kg for Jisan-series, and 10~11kg/10a for Yongji-series. The yield increase per kg of applied nitrogen was 12kg for Jisan-series and 13kg for Yongji series. 6. The optimum level of phosphorus at the optimum level of nitrogen was 6kg/10a for Yongji-series and 3kg/10a for Jisan-series. The optimum level of phosphorus, however, was different depending upon the nitrogen level. It was assumed that Yongji-series required more fertilizer (available $P_2O_5$ was 110ppm) than Jisan-series (available $P_2O_5$ was 64ppm) because the availability of P was higher in Jisan-series than Yongji-series due to the severe reduction of Jisan-series. 7. The response of potassium was also depending upon the nitrogen level. In Yongji-series the potassium response at 8kg/10a nitrogen level decreased with increasing levels of potassium, but the higher level of introgen, potassium response was also higher. In Jisan-series potassium response was recognized at all nitrogen levels. The optimum level of potassium at the optimum level of nitrogen was 8kg/10a in both serieses. 8. The reasonable ratio of NPK fertilizer seems to be 1:0.6:0.6:for Yongji-series and 1:0.4:1 for Jisan-series as N:$P_2O_5$:K.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.10a
• /
• pp.111-114
• /
• 2005

1. 증체량 이유자돈 시부터 비육돈 완성기간까지 비육 전체 기간동안의 증체량은 다음과 같이 분석되었다. 처리별 암컷의 증체량은 생봉독처리 2구에서 99.08kg으로 가장 높았고, 생봉독처리 1구에서 99.08kg, 무처리구에서 95.88kg, 생봉독처리 3구에서 93.50kg 순으로 최고치와는 5.58kg의 차이를 보여주었으며 대조구와는 3.2kg 증체량이 높아 3.3% 증체율이 높았다. 거세돈에서의 처리별 증체중은 생봉독 처리 2구에서 102.23kg으로 가장 높았고, 다음은 생봉독처리 1구에서 101.79kg, 무처리구에서는 88.96kg, 생봉독 3처리구에서는 95.76kg의 순으로 나타냈다. 따라서 최고치와 최저치의 차이는 6.47kg으로 유의한 수준차(p<0.05)로 나타났으며 대조구보다는 3.2kg의 증체량 차이로서 암컷과 같은 수준으로 나타났다. 2. 사료효율 비육 전체기간 동안의 처리별 암수간 평균 두당 사료섭취량과 사료효율은 다음과 같다. 암컷의 평균 사료효율은 생봉독 처리 1구에서 2.55로 처리구중에서 가장 우수하였고, 다음은 생봉독처리 2구와 대조구에서 2.56으로 동일하게 분석되었으며, 생봉독 3처리구에서 가장 저조한 2.62의 순으로 분석되어 사료효율 0.07 차이로 2.3%의 차이를 보여주었다. 발육성적이 가장 높은 생봉독 2처리구에서는 255kg의 사료를 섭취하여 2.54의 최적의 사료효율을 보여주어 사료 효율면에서도 생봉독 2처리구에서 가장 경제성이 높은 것으로 분석되었다. 3. 육성율 및 생산지수 폐사수는 생봉독 처리 3구에서 2두(자웅 각 1두)가 발생하여 육성율 95%로 처리구중에서 가장 저조하였고, 다음은 대조구 1두가 발생하여 육성율 97.5%를 보여주었는데 비하여 생봉독처리 1구와 2구에서는 폐사돈이 발생하지 않아 육성율 100%를 보여주었다. 생산지수는 대조구를 100으로 기준하였을 때 생봉독처리 2구에서 107.87로 가장 우수하였으며, 생봉독 처리 1구에서 106.22, 가장 저조한 처리구는 폐사수가 많은 생봉독 처리 3구에서 94.73으로 나타내었다. 이상과 같이 생봉독 처리 2구에서 가장 우수한 생산효과를 나타내었다. 4. 생산성 향상 효과 처리별 대조구(100) 대비 사료섭취량은 생봉독 처리 3구에서 97.22로 가장 낮았고, 기타 처리구는 1.19${\sim}$1.59의 처리를 보이고 있는데 비하여, 대조구(100) 대비 증체율에서는 생봉독 처리 2구에서 103.30으로 3.30%가 높았다.

• Toxicological Research
• /
• v.13 no.1_2
• /
• pp.103-110
• /
• 1997

This study was performed to investigate the effects of cadmium chloride on the acute and chronic toxicity on rats. Several toxic effects of cadmium has been shown following short-term and longterm pretreatment with cadmium and zinc. Four groups of rats (A, B, C, D), each consisting of 16 rats, were studied and each group was divided into four subgroups (1, 2, 3, 4), 4 rats for each subgroup. Rats were subcutaneously pretreated with $CdCl_2$ (0.5 mg/kg, A & C), and $ZnCl_2$ (13.0 mg/kg, B & D) during time periods of 1 weeks (group A & B) and 6 weeks (group C & D). At the end of the period, rats were challenged with $CdCl_2$ (3.0, 6.0 and 9.0 mg/kg, i.p.). After giving the challenge dose, cadmium and metallothionein(MT) concentrations were determined. The concentrations of cadmium were higher in the liver than the kidney irrelevantly to cadmium and zinc pretreatment and increased dose-dependently to the challenge dosage. The metallothioneins showed higher concentrations in the liver than the kidney following cadmium pretreatment and were higher in the long-term pretreatment groups than the short-term pretreatment groups in the liver and the kidney of rats. These data suggest that metallothioneins are induced preferentially in the liver by pretreatment of cadmium and then, formed in the form of Cd-MT, may play an important role in the nephrotoxicity.

• Journal of Nutrition and Health
• /
• v.28 no.7
• /
• pp.612-619
• /
• 1995

This study was to investigate the intake of human milk, sodium and potassium of breast-fed infants at 7, 15, 30, 60 and 90 days postpartum. Milk samples were obtained from 20 healthy lactating women living in In-Cheon area. Milk intakes of 20 breastfed infants were determined by the test-weighing method and soldium and potassium contents of human milk were analyzed by Atomic Absorptin Spectrophotometer after Wet-Digestion. Infant milk intakes per day tended to increase during lactation. The mean($\pm$SD) intakes at 7, 15, 30, 60 and 90 day were 460(164), 547(202), 626(199), 718(139) and 688(162)g/day, respectively. The sodium contents decreased significantly from 9.7(1.1)mEq/kg at 7 day to 6.3(1.8)mEq/kg at 90 day(p<0.05). The sodium intakes of infants were 100.8(39.6), 103.3(46.7), 107.2(47.9), 115.5(41.5) and 105.2(41.2)mg/day, respectively and average intake was 107.2(43.9)mg/day. The potassium contents were ranged from 10.5(1.3) to 13.3(2.3) mEq/kg and the potassium intakes of infants were 241.8(11.2), 267.8(98.8), 314.1(98.6), 318.0(66.1) and 276.1(62.6)mg/day, respectively and average intake was 288.3(91.8)mg/day. The mean sodium and potassium intakes of infants between boys and girls were not significantly different at 5% level.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2003.04a
• /
• pp.98-103
• /
• 2003

우리나라의 가지 재배면적은 1970년 2,815ha이었던 것이 그 후 점차 줄어들어 2001년은 866ha가 재배되고 있고, 시설재배면적은 1970년 27ha로 전체면적의 1%도 채 안되는 매우 적은 면적이었으나 2001년에는 전체면적의 33%에 가까운 284ha가 재배되고 있다. 연간 총생산량으로 보면 1970년에 비하여 큰 차이가 없다. 이는 노지재배의 10a당 수량이 적을 때는 892kg 많을 때는 2,782kg 이나 시설재배의 10a당 수량은 1,617-4,294kg으로 노지재배에 비해 시설재배의 수량이 많기 때문이다(M.A.F. 2001). (중략)

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.103-124
• /
• 1992

The purpose of this study was to investigate the effect on the fracture strength and color of ceramic by the design of the metal coping in ceramo metal crown. In this study, four types of ceramic crowns were made for fracture strength : standard ceramo metal crown, collariess ceramo metal crown, modified ceramo metal crown, and ceramic jacket crown. And three types of disk formed-specimens were made to compare the dentin shade owing to aluminous opaque powder and palladium alloy. Fracture strength was measured by universal testing machine(Instron Co. Ltd., U.S.A) and color was measured by color and color difference meter(Yasuda Seiki Seisakusho, Ltd., Japan). The results were as follows : 1. The fracture strength of ceramic was affected significantly by the design of metal coping in ceramo metal crown. The mean fracture strength(192.0 Kg) of standard ceramo metal crown was about 1.7 times higher than that(111.5 Kg) of collarless ceramo metal crown, and about 2.8 times higher than that(67.8 Kg) of ceramic jacket crown. 2. Modified ceramo metal crown that has metal band in the labio cervical had the lowest fracture strength. 3. Lightness, yellowness and redness of the dentin fired were decreased by the metal coping.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.103-110
• /
• 2007

This study estirmted the appropriate pollutant load reduction from point sources in Jinhae Bay, Korea, using an eco system model. The results of COD values in the inner part of the bay obtained through the simulation by ecosystem model were greater than 3.0mg/L, and exceeded the limits of Korean Coastal Water Quality Grade III. Engineering countermeasures to reduce the $70\sim90%$ of all land based pollution load or organic and inorganic material loads from point sources by more than 50% were required to keep the COD levels below 2 mg/L. The reduction loads is 5,632kg/day of COD, 481kg/day of DIP and 7,991 kg/day of DIN in case of the reduction of both the organic and nutrients. The estimated environmental currying capacity of that case is 13,112kg/day of COD, 206kg/day of DIP and 3,425kg/day of DIN to keep the COD levels below 2mg/L.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.695-705
• /
• 2006

This study was carried out to make a basic information for establishment of countermeasures against water pollution of Hoengseong watershed, accordingly we investigated the characteristics of pollutants discharge and estimated the unit loads from Hoengseong watershed. Seven sites (S1~S7) were selected for sampling and samples were taken 4 times during the dry and rainy seasons, respectively. During rainfall events, measured site mean concentration (SMC) ranges of $BOD_5$, $COD_{Mn}$, TOC, SS, Turbidity, T-N and T-P were 0.8~1.3 mg/L, 2.3~6.3 mg/L, 1.284~2.110 mg/L, 3.4~69.3 mg/L, 2.36~52.68 NTU, 1.243~1.669 mg/L and 0.025~0.070 mg/L, respectively. And the calculated annual unit loads of $BOD_{5}$, $COD_{Mn}$, SS, T-N and T-P in Hoengseong watershed were 1.327 kg/ha/yr, 7.349 kg/ha/yr, 87.075 kg/ha/yr, 1.848 kg/ha/yr and 0.103 kg/ha/yr, respectively. It was difficult to directly compare the unit loads proposed in this study with the estimated existing those. Because the unit loads in this paper were estimated not by land use types, but by complex land use of non-urban area. From the survey results, they showed that the unit loads in Hoengseong watershed were similar to those exisiting in the forest area, and showed lower than those existing in the paddy/dry field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.103-112
• /
• 1994

This study was a sequential experiment consisting if feeding trial and in vitro culture studies. Feeding was conducted by $2{\times}2{\times}2$ factorial design with two cimaterol levels (0, 0.25 mg/kg), two energy levels (3,200, 2,900 ME kcal/kg) and two sexes. In starting period (0-21 days) broilers were fed diets containing two energy level without dietary supplementation of cimaterol. During finishing period (21-42 days) cimaterol groups were fed cimaterol supplemented diets. In vitro cultures were carried out to study the cellular metabolism of protein and fat in liver and adipose tissues prepared from chicks used in feeding trials. Body weight gain was significantly improved by the administration of cimaterol to experimental diets by 2.4% (p < 0.05). Feed intake was reduced by cimaterol administration at the high energy level, but this trend was reversed at low energy level. Feed efficiency was improved by cimaterol administration and at high energy level the difference (5.7%) was significant(p < 0.05). The administration of cimaterol had no effects on percentage of abdominal fat content, giblet and neck. There was little difference in carcass yield between control and cimaterol treated group. The administration of cimaterol had no effects on nutrient metabolizability or carcass composition. The results of in vitro studies with liver tissues showed that cimaterol increased the lipolytic activities (p < 0.05) and decreased lipogenic activities (p < 0.05). In in vitro studies with acinar cell of liver tissues. cimaterol increased the amount of retained protein and decreased secreted protein at high energy level. but the trend was opposite at low energy level.

• Steel and Composite Structures
• /
• v.15 no.1
• /
• pp.103-130
• /
• 2013

Fire performance and fire safety of high-rise buildings have become major concerns after the disasters of World Trade Center in the U.S. in 2001 and Windsor tower in Spain in 2005. Performance based design (PBD) approaches have been considered as a better method for fire resistance design of structures because it is capable of incorporating test results of most recent fire resistance technologies. However, there is a difficulty to evaluate fireproof performance of large structures, which have multiple structural members such as columns, slabs, and walls. The difficulty is mainly due to the limitation in the testing equipment, such as size of furnace that can be used to carry out fire tests with existing criteria like ISO 834, BS 476, and KS F 2257. In the present research, a large scale calorie meter (10 MW) was used to conduct three full scale fire tests on medical modular blocks. Average fire load of 13.99 $kg/m^2$ was used in the first test. In the second test, the weighting coefficient of 3.5 (the fire load of 50 $kg/m^2$) was used to simulate the worst fire scenario. The flashover of the medical modular block occurred at 62 minutes in the first test and 12 minutes in the second test. The heat resistance capacity of the external wall, the temperatures and deformations of the structural members satisfied the requirements of fire resistance performance of 90 minutes burning period. The total heat loads and the heat values for each test are calculated by theoretical equations. The duration of burning was predicted. The predicted results were compared with the test results, and they agree quite well.