• The Korean Journal of Pharmacology
• /
• v.32 no.2
• /
• pp.221-231
• /
• 1996

The properties of cytosolic $Ca^{2+}$ level$([Ca^{2+}]_i)$ movement of high KCl, carbachol and oxytocin were examined with myometrium isolated from non-pregnant rat(estrus cycle). High concentration of KCl$({\leq}23.3mM)$ induced rhythmic increases in $[Ca^{2+}]_i$ and muscle contraction. However, sustained $[Ca^{2+}]_i$ and contracion were obtained at higher KCl concentration $({\geq}30.3mM)$ The rhythmic and sustained contraction closely associated with changes in $[Ca^{2+}]_i$ induced by high KCl. Carbachol $(3{\sim}30{\mu}M$ generated rhythmic increases with tonic component in $[Ca^{2+}]_i$ and muscle contraction. Myometrial contraction stimulated by carbachol was also closely correlated with change in $[Ca^{2+}]_i$. And the $[Ca^{2+}]_i/contraction$ relationships were similar when muscle strips were stimulated by high KCl and carbachol. Maximal concentration of carbachol $(10{\mu}M)$ and oxytocin(100 nM) increased $[Ca^{2+}]_i$ and contraction which were slightly greater than that of high KCl in non-pregnant myometrium, respectively. However, the $[Ca^{2+}]_i$ and contraction were strongly inhibited by verapamil $(10{\mu}M)$, a 1-type $Ca^{2+}$ channel blocker, as in the case of high KCl. Additionally, although carbachol further increased $[Ca^{2+}]_i$ and contraction induced by high KCl, these changes also strongly inhibited by application of verapamil. These results suggest that uterotonic agents, carbachol and oxytocin, induced contraction by increase in $[Ca^{2+}]_i$ through $Ca^{2+}$ influx than by a regulation of $Ca^{2+}-sensitization$ in non-pregnant myometrium.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.347-352
• /
• 2013

Four types of electrolyte were tested for the application as an electrolyte in the Zn-Br redox flow battery. Electrolyte was consist of $ZnBr_2$ (electrolyte number 1), $ZnBr_2+KCl$ (electrolyte number 2), $ZnBr_2+KCl+NH_4Br$ (electrolyte number 3) and $ZnBr_2+KCl+EMPBr(C_7H_{16}BF_4N)$ (electrolyte number 4). The each electrolyte property was measured by CV (cyclic voltammetry) method. The different between the potential of anodic and cathodic maximum current density in a CV experiment (${\Delta}E_P$) was 0.89V, 0.89V, 1.06V and 0.61V for the electrolyte number 1, 2, 3 and 4, respectively. The electrolyte involved KCl increased conductivity which was appeared by anodic and cathodic maximum current density in a CV experiment. It was estimated that the electrolyte of number 3 ($ZnBr_2+KCl+NH_4Br$) and number 4 ($ZnBr_2+KCl+EMPBr$) could be suitable as an electrolyte in the Zn-Br redox flow battery with non-appeared bubble, non-Br formation and high anodic-cathodic maximum current density.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.1065-1080
• /
• 2023

The solubility and structure of myosin and the properties of pork gel with NaCl, KCl, CaCl₂, and MgCl₂ were investigated. Myofibrillar proteins (MPs) with phosphate were more solubilized with NaCl than with KCl (p < 0.05). CaCl₂ and MgCl₂ showed lower MP solubilities than those of NaCl and KCl (p < 0.05). The α-helix content of myosin was lower in KCl, CaCl₂, and MgCl₂ than in NaCl (p < 0.05). The pH of pork batter decreased in the order of KCl, NaCl, MgCl₂, and CaCl₂ (p < 0.05). The cooking yield of the pork gel manufactured with monovalent salts was higher than that of the pork gel manufactured with divalent salts (p < 0.05). The pork gel manufactured with KCl and MgCl₂ showed lower hardness than that of the pork gel manufactured with NaCl. The solubility and structure of myosin were different with the different chloride salts and those led the different quality properties of pork gel. Therefore, the results of this study can be helpful for understanding the quality properties of low-slat meat products manufactured by replacing sodium chloride with different chloride salts.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.298-303
• /
• 2010

In this work, the effects of $Cs^+$ on root growth of 2-day-old maize seedlings were scrutinized. CsCl (5 mM - 30 mM) decreased the fresh weight of the primary root and of the shoot above the coleoptilar node. The elongation growth of the primary root was also inhibited by CsCl. The CsCl-inhibited growth was partially restored by 60 mM KCl. Lineweaver-Burk plot of the reaction in the presence and absence of 60 mM KCl displayed competitive interaction of CsCl (at higher than 10 mM). However, the Reversal of the inhibition by 60 mM KCl did not follow the competitive relationship with 5 mM CsCl, indicating the presence of differential mechanisms of $K^+$ influence depending on the concentration of CsCl. The differential effects of CsCl dependent on the concentrations were also observed in the CsCl-evoked radial expansion of the subapical region of the root. In spite of the decrease in length of the root, shrinkage of the root apical meristem was not observed. CsCl above 10 mM induced the expression of ZmKUP1, indicating functional deficiency of $K^+$ due to competition with Cs. However, the expression of ZmKUP1 by 5 mM CsCl was unclear. Conclusively, exogenously applied $Cs^+$ decreased root elongation and fresh weight and caused radial expansion of the subapical region of the primary root in 2-day-old maize seedlings by complex mechanisms including competitive and noncompetitive interactions with $K^+$. Because the shrinkage of the root apical meristem was not observed, it is concluded that the effects of CsCl on maize root growth was mainly related to cell expansion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.282-287
• /
• 1996

This study was conducted to identify the parameter better representing the nitrogen supply capacity of soils for the vegetable crops growing in vinylhouse. All the parameters showed significant positive correlation with the yield of chinese cabbage. The correlation coefficients were in the order of $NO{_3}^--N+NH{_4}^+-N(2M\;KCl)$ > $NO{_3}^--N(2M\;KCl)$ > OM > T-N > 0.01M $NaHCO_3$ > 0.01M $CaCl_2$ > $NH{_4}^+-N(2M\;KCl)$ > 6N HCl. Between the soil N and N absorbed by plant, the correlation coefficients were in the order of $NO{_3}^--N+NH{_4}^+-N(2M\;KCl)$ > $NO{_3}^--N(2M\;KCl)$ > 0.01M $NaHCO_3$ > $NH{_4}^+-N(2M\;KCl)$ > 0.01M $CaCl_2$ > OM > T-N > 6N HCl. The results of this study suggest that 2M KCl extractable inorganic N. 2M KCl extractable $NO{_3}^--N$ are recommendable parameters for the estimation of N supply capacity of the vinylhouse soils. The sum of soil $NO{_3}^--N$ and fertilizer nitrogen showed highly significant positive correlation with the yields of chinese cabbage and nitrogen absorbed by the plant, while negative correlation with the nitrogen use efficiency.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.29-34
• /
• 1985

The PTCR characteristics of the $BaTiO_3$ as a function of the molten KCl and dopant $Sb_2O_3$ were investitated. When the weight ratio of KCl to raw materials was above 0.1, $BaTiO_3$ was synthesized by calcining at 80$0^{\circ}C$ for 6 hrs. As the amount of the KCl increased the resistivity of the $BaTiO_3$ at room temperature incr-eased. This can be explained by charge compensation effect between electrons and holes and with microstruc-tures change of the specimens. The resistivity of the $BaTiO_3$ decreased with increasing amount of $Sb_2O_3$. In the time-current characteristics initial current decreased with increasing the ratio of KCl to raw materials but initial current increased and then decreased with the increase of the dopant $Sb_2O_3$. These results of the time-current characteristics can be explained by the resistivity-temperature characteristics.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3957-3961
• /
• 2022

Deposition behaviors of Sr and Cs in various liquid cathodes, such as Zn, Bi, Cd, and Pb, were examined to evaluate their recovery from LiCl-KCl eutectic salt. Cations in the salt were deposited on the liquid cathode, exhibiting potential of -1.8 to -2.1 V (vs. Ag/AgCl). Zn cathode had successful deposition of Sr and exhibited the highest recovery efficiency, up to 55%. Meanwhile, the other liquid cathodes showed low current efficiencies, below 18%, indicating LiCl-KCl salt decomposition. Sr was recovered from the Zn cathode as irregular rectangular SrZn₁₃ particles. A negligible amount of Cs was deposited on the entire liquid cathode, indicating that Cs was hardly deposited on liquid cathodes. Based on these results, we propose that liquid Zn cathode can be used for cleaning Sr in LiCl-KCl salt.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.279-291
• /
• 2022

In this report the thermochemical conversion of Sm₂O₃ to SmCl₃ using AlCl₃ in LiCl-KCl melt at 773 K is discussed. The final product was a mixture of SmCl₃, Al₂O₃, unreacted Sm₂O₃ and AlCl₃ in the chloride melt. The electrochemical attributes of the mixture was analyzed with cyclic voltammetry (CV) and square wave voltammetry (SWV). The crystallographic phases of the mixture were studied with X-ray diffraction (XRD) technique. The major chemical conversion was optimized by varying the effective parameters, such as concentrations of AlCl₃, duration of reaction and the amount of LiCl-KCl salt. The extent of conversion and qualitative assessment of efficiency of the present protocol were evaluated with fluorescence spectroscopy, UV-Vis spectrophotometry and inductively coupled plasma atomic emission spectroscopy (ICP-AES) studies of the mixture. Thus, a critical assessment of the thermochemical conversion efficiency was accomplished by analysing the amount of SmCl₃ in LiCl-KCl melt. In the process, a conversion efficiency of 95% was achieved by doubling the stoichiometric requirement of AlCl₃ in 50 g of LiCl-KCl salt. The conversion reaction was found to be very fast as the reaction reached equilibrium in 15 min.

• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.91-95
• /
• 1999

To investigate the effect of salts on the production of erythritol by Torula sp., cells were grown on the media containing various concentrations of KCl or NaCl. Cell growth and glucose consumption rates decreased when KCl or NaCl concentration increased from 0.0 to 0.5M. The production of erythritol, however, was maximal at 0.3M aCl. The erythritol concentration of 54.3g/l in the medium containing 0.3M NaCl and 200g/l glucose was obtained after 120h. The production of erythritol decreased in cultures above 0.3M NaCl or 0.4M KCl due to the inhibition of cell growth. To elucidate the effect of salts more quantitatively, KCl and NaCl concentrations were converted to osmotic pressure. As the osmotic pressure increased, the yield of erythritol from glucose increased regardless of the kinds of salts and the yield of erythritol was approximately 49% at the osmolality of 2.4Os/kg. When the osmotic pressure increased to 2.5Os/kg, the specific growth rate of cells decreased but the production rate of erythritol increased. For the effective production of erythritol, osmotic pressure must be adjusted not to inhibit markedly the growth rate of cells and to stimulate the production rate of erythritol by supplementing salt.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.4
• /
• pp.549-562
• /
• 2020

Deionized water, methanol, and ethanol were investigated for their effectiveness at dissolving LiCl-KCl-UCl3 at 25, 35, and 50℃ using inductively coupled plasma mass spectrometry (ICP-MS) to study the concentration evolution of uranium and mass ratio evolutions of lithium and potassium in these solvents. A visualization experiment of the dissolution of the ternary salt in solvents was performed at 25℃ for 2 min to gain further understanding of the reactions. Aforementioned solvents were evaluated for their performance on removing the adhered ternary salt from uranium dendrites that were electrochemically separated in a molten LiCl-KCl-UCl3 electrolyte (500℃) using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). Findings indicate that deionized water is best suited for dissolving the ternary salt and removing adhered salt from electrodeposits. The maximum uranium concentrations detected in deionized water, methanol, and ethanol for the different temperature conditions were 8.33, 5.67, 2.79 μg·L-1 for 25℃, 10.62, 5.73, 2.50 μg·L-1 for 35℃, and 11.55, 6.75, and 4.73 μg·L-1 for 50℃. ICP-MS analysis indicates that ethanol did not take up any KCl during dissolutions investigated. SEM-EDS analysis of ethanol washed uranium dendrites confirmed that KCl was still adhered to the surface. Saturation criteria is also proposed and utilized to approximate the state of saturation of the solvents used in the dissolution trials.