• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.479-485
• /
• 2009

The acidolysis was performed to produce structured lipid with palm mid fraction (PMF) and stearic acid for 7, 24, and 36 hr at $70^{\circ}C$. The reaction was catalyzed by lipozyme TLIM (immobilized lipase from Thermonyces lanuginosa, amount of 10% and 20% by weight of total substrates) in the shaking water bath. The reaction conditions for maximum incorporation of stearic acid on the structured lipid were obtained when molar ratio of PMF and stearic acid was 1:2; concentration of lipozyme TLIM was 20wt%; reaction temperature was $70^{\circ}C$; and reaction time was 36 hr. After reaction under this condition, incorporation of stearic acid in the structured lipid was obtained up to 36.3% while the major components of triacylglycerol were 1,2-dipalmitoyl-3-stearoylglycerol (PPS, 28.19 area%), 1-palmitoyl-2-oleoyl-3-stearoylglycerol (POS/PSO, 20.70 area%) and 1-palmitoyl-2,3-distearoylglycerol (PSS, 18.13 area%). However, the fatty acid composition at the sn-2 position suggested that the positional specificity of lipozyme TLIM was not observed due to the acyl migration.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.12-24
• /
• 2018

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.1012-1017
• /
• 2008

Purpose : This study aimed to assess the mechanical properties of the abdominal aorta in school-aged patients treated for Kawasaki disease and in normal, healthy children. Methods : This study examined 28 children with Kawasaki disease who had been followed up on and 30 healthy subjects of the same age and gender. We recorded systolic (Ps) and diastolic (Pd) blood pressure values and the aortic diameter at both minimum diastolic (Dd) and maximum systolic (Ds) expansion using two-dimensional echocardiography. These measurements were used to determine 1) aortic strain: S=(Ds-Dd)/Dd; 2) pressure strain elastic modulus: Ep=(Ps-Pd)/S; and 3) normalized Ep: $Ep^*=Ep/Pd$. Results : Ep (P=0.008) and $Ep^*$ (P=0.043) of the Kawasaki disease group were relatively high compared to those of the control group. Ep (P=0.002) and $Ep^*$ (P=0.015) of patients with coronary aneurysm were also relatively high compared with those of patients without coronary aneurysm, but lipid profiles did not differ, except for homocysteine (P=0.008). Therefore, in patients with coronary aneurysm, aortic stiffness was higher, compared to not only the control group but also patients without coronary aneurysm. However, in patients without coronary aneurysm, aortic stiffness was not significant, different compared to the control group. Conclusion : Measuring aortic distensibility may be helpful in assessing the risk of early atheroscletic change in the long-term management of Kawasaki disease.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.38-42
• /
• 2014

The poly[(9,9-bis((6'-(N,N,N-trimethylammonium)hexyl)-2,7-fluorene)-alt-(9,9-bis(2-(2-(2-methoxyethoxy)ethoxy)ethyl)-9-fluorene)) dibromide (WPF-6-oxy-F)] and graphene oxide (GO) was blended and irradiated with gamma ray under ambient condition. This WPF-6-oxy-F-GO composite was investigated as a hole-transporting layer (HTL) in organic solar cells (OSCs). Compared with the pristine GO, the sheet resistance ($R_{sheet}$) of irradiated WPF-6-oxy-F-GO was decreased about 2 orders of magnitude. The reason for the decrease of $R_{sheet}$ is the effect of efficient ${\pi}-{\pi}$ packing resulted from the formation of C-N bond between WPF6-oxy-F and GO. As a result, the efficiency of OSCs was dramatically enhanced ~ 6.10% by introducing irradiated WPF-6-oxy-F-GO as a HTL. WPF-6-oxy-F-GO is a sufficient candidate for HTL to facilitate the low-cost and high efficiency OSCs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6871-6879
• /
• 2014

Background: The purpose of this study was to evaluate the potential association of five (p.P47S, p.R72P, PIN3 Ins16bp, p.R213R and r.13494g>a) polymorphisms of TP53 with the risk of developing breast cancer in North Indian Punjabi population. Methods: We screened DNA samples of 200 sporadic breast cancer patients (197 females and 3 males) and 200 unrelated healthy, gender and age matched individuals for the polymorphisms. Results: For the p.P47S polymorphism, we observed the PP genotype in 99.5% of the patients and PS genotype in only 1 patient. All the controls had the wild type PP genotype. The frequency of RR, RP and PP genotype of p.R72P was 23.5% vs 33.5%, 51.5% vs 45.5% and 25% vs 21% in patients and controls respectively. Heterozygous (RP) genotype was increased in breast cancer patients as compared to controls (51.5 vs 45.5%) and showed 1.61 fold significantly increased risk for breast cancer (OR=1.61, 95% CI, 1.01-2.58, p=0.04). In breast cancer patients the frequencies of A1A1, A1A2 and A2A2 genotypes of PIN3 Ins16bp polymorphism were 67%, 26% and 7% respectively whereas in controls the genotype frequencies were 68.5%, 27.5% and 4% respectively, with no significant difference. For p.R213R (c.639A>G), all individuals had homozygous wild type genotype. The frequencies of GG, GA and AA genotypes of TP53 r.13494g>a polymorphism were 62 vs 67.5%, 33 vs 28% and 5 vs 4.5% in patients and controls respectively, again without significant difference. We observed that RP-A1A1 genotype combination of p.R72P and PIN3 Ins16bp and RP-GG combination of p.R72P and r.13494g>a polymorphism showed significant risk of breast cancer (OR=1.65, 95%CI: 0.98-2.78, p=0.05; OR=1.72, 95%CI: 1.01-2.92, p=0.04). Conclusion: The results of present study indicated that among the five TP53 polymorphisms investigated, the p.R72P polymorphism, and the RP-A1A1 and RP-GG genotype combination contribute to breast cancer susceptibility in North Indians.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.233-239
• /
• 2010

Pure macroporous silica matrix using a template of polystyrene (PS) was prepared by the sol-gel method. Macroporous Ag-$SiO_2$ composite materials, which were homogeneously dispersed with Ag particles in the macropores, were successfully fabricated. The pure porous silica had ordered pore sizes of 100 nm and 200 nm, which was adjusted under consideration of the template size. The macroporous Ag-$SiO_2$ composite showed the ideal ordered distribution of the pore in case of the adding of 3 wt% $AgNO_3$ under consideration of controlling of the pore size as well as microstructural observation of $AgNO_3$concentration. The macroporous Ag-$SiO_2$ composites had ordered 100 nm and 200 nm pores, and the Ag particles within the matrix showed the size of 15~20 nm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.65-73
• /
• 2012

In this study, we tested structural performance of Half-Decked PSC girder which was developed for applying to long span bridge. We operated 4 point bending test with 60 m span full scale girder designed as simple bridge with hinge-roller boundary condition. Actuators were set on the both sides of girder, 5.5 m away from the center, and 4 stages of cyclic loading was applied at rate of 1 kN/sec. Through stages 1 to 4, loading and unloading 1,000 kN, 1,200 kN, 1,500 kN, and 2,000 kN were repeated and displacement, strain of concrete and steel, crack of girder were checked. From these results, the strength of girder was assessed and resilience and ductility were observed after removing the load. Since initial flexural crack occurred in the vicinity of 1,400 kN, non-linearity of load-displacement curve appeared and definite residual strain was measured at that point. The test result showed that initial cracking load was over twice the DB-24 load which means the developed girder had sufficient strength. To verify the experimental results, we numerically analyze the test and confirmed that the data were similar with results from the test above. Half-Decked PSC type of 60 m-girder developed in this study showed its adequate structural capacity through static loading test, which proved that possibility of applying the girder to actual bridges practically.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.40-40
• /
• 2017

본 연구는 빛의 파장대가 넓어 보다 다양한 접근과 검출이 가능한 초분광 카메라 (VNIR spectral camera PS, SPECIN Filand)를 이용하여 정식시기가 다른 배추를 생육단계별로 영상을 취득한 후 배추 캐노피의 전 파장 (400~1000nm)으로 생육 추정모델을 개발하기 위해 수행하였다. 정식시기가 다른 배추를 생육단계별로 초분광 카메라로 영상을 취득한 후 취득된 영상 ($348{\times}1040$)을 ENVI (ver. 5.2, Exelis Visual Information Solutions, USA) 프로그램을 이용하여 식생지수 NDVI로 작물과 배경을 구분하였다. 배추 캐노피 영역에 전 파장을 산출한 후 반사판 영역의 전 파장을 이용하여 광 보정된 반사율을 산출하였다. 통계 프로그램인 R Project (ver.3.3.3, Development Core Team, Vienna, Austria)를 이용하여 배추의 반사율과 계측한 생육 정보를 PLSR (Partial least squares regression) 분석하여 정확도($R^2$) 및 정밀도 (RMSE [g,cm,count], RE [%])로 나타내었고 그 모델은 full-cross validation (FV) 하여 타당성을 검증하였다. 정식시기가 다른 배추의 모든 생육단계의 생육정보를 이용하여 PLSR (Partial least squares regression) 결과 엽장을 추정한 모델의 $R^2$는 84% 이상의 정확도와 RMSE 3.2cm 이하의 좋은 정밀도를 보였다. 엽폭을 추정한 모델의 $R^2$는 73% 이상의 정확도와 RMSE 3.5cm 이하의 정밀도를 보였고 엽수를 추정한 모델의 $R^2$는 93% 이상의 정확도와 RMSE 6.3Count 이하의 정밀도로 보여 캐노피의 전 파장을 이용해 생육을 추정하는 것이 가능하다고 판단되었으며 이 모델들의 타당성 검증에서도 좋은 정확도와 정밀도를 보였다. 그러나 배추의 중요한 생육인자 중 생체중을 추정한 모델의 $R^2$는 89% 이상으로 정확도가 높았으나 RMSE 571.1g 이하로 낮은 정밀도를 보여 생체중을 정확히 추정하기 어려웠다. 따라서 다른 통계분석방법으로 전 파장과 생육정보를 분석하거나 특정 밴드를 선택하여 산출한 식생지수를 이용한 추정 모델의 개발을 통하여 오차를 개선할 필요가 있다고 사료된다. 추후 반복 실험하여 분석한 추정 모델과 비교 분석하여 다양한 환경 및 생물 조건에 범용성을 가진 모델을 개발할 필요가 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.347-356
• /
• 2001

The issues that influence the packaging of high-speed LiNbO$_{3}$ modulators are discussed, and packaging approaches that result in only minor degradation of the modulator's RF performance are described. The primary problems dealt in this paper, associated with high-speed device packaging, are fallen into the following five categories: die features, pigtailing, suppression of RF package resonance, RF launcher approach, termination approach. By considering factors to influence the modulator performance in packaging, a LiNbO$_{3}$ intensity modulator was fabricated and packaged to have S21 better than -3㏈ upto 10㎓ and S11 below -l5㏈ upto 18㎓.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.239-249
• /
• 2008

Trawlers have to a sufficient towing force due to it's characteristics of the high performance. The newly constructed trawler with the conventional propellers shows the sufficient towing force, so that the propeller and engine are optimized. In the 1970s, many trawlers were imported from overseas by Korean fisheries industries. But the engine output degradation with year by year caused the trawlers to decrease the towing speed of the vessels. On the previous studies, the nozzle propeller had not so good efficiency with increasing of resistance in high-speed cruising operation over 15knots. But the trawling operation is just required the higher thrust and towing force, so that the nozzle propeller is very profitable for the it's effectiveness. A new nozzle propeller was designed for the 4,462G/T trawler, Dong-San, operated by Dongwon Industries Co., Ltd. to improve the towing speed, and the model tests were performed. The model ship and model propeller are preciously manufactured and used model tests in basin. The resistance test and propeller open water test were performed for the cases of the half and full loads. The required engine horse power and RPM were evaluated analytically by the speed-power curve, when the trawler was equipped with the nozzle propeller. The results of tests showed that the towing speed 4.85knots on the design load waterline requires the 200 engine RPM and 2,567ps in the delivered horsepower.