• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1139-1150
• /
• 2014

This study modified the Parameter-elevation Regression on Independent Slopes Model (PRISM) and investigated the applicability of the modified model (M-PRISM) in estimating $1km{\times}1km$ gridded daily precipitation over South Korea. The model parameters of M-PRISM were estimated by regression curves and were validated using the Jackknife method at the Korean Meteorological Administration (KMA) stations. The results indicate that M-RPISM shows better performance in estimating the frequency of daily precipitation than PRISM while M-PRISM has similar performance to PRISM in estimating the daily precipitation amount. Thus the M-PRISM model proposed in this study can be very useful to estimate high resolution daily precipitation.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• Atmosphere
• /
• v.17 no.3
• /
• pp.255-268
• /
• 2007

This study generated and evaluated the high resolution (5 km) gridded data of monthly mean, maximum and minimum temperature from 2002 to 2005 over South Korea using a modified PRISM(Parameter-elevation Regressions on Independent Slopes Model: K-PRISM) developed by Daly et al. (2003). The performance of K-PRISM was evaluated by qualitative and quantitative ways using the observations and gridded data derived by inverse distance weighting (IDW) and hypsometric methods (HYPS). For the generation of high resolution gridded data, geographic informations over South Korea, such as the digital elevation, topographic facet and coastal proximity, are derived from the 1 km digital elevation data. The spatial patterns of temperature derived by K-PRISM were more closely linked to topography and coastal proximity than those by IDW. The K-PRISM performed much better than IDW for all months and temperatures, but it was equal to or slightly better than the HYPS. And the performances of K-PRISM were better in the minimum and mean temperature (winter) than the in maximum temperature (summer).

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.299-305
• /
• 2017

This study relates to the development of a program for calculating the design data and estimating on the Abbe-$K{\ddot{o}}nig$ prism. First, we set the Abbe-$K{\ddot{o}}nig$ prism design variables and derive the relational expressions between them. With this expressions, we could develope the program that outputs the numerical data for the Abbe-$K{\ddot{o}}nig$ prism design and three evaluation data for the Abbe-$K{\ddot{o}}nig$ prism analysis when the face-length, the effective convergent incident angle of incident beam, and the refraction index of prism are given. In fact, applying this program to the prism which is not the commercial size, we were able to calculate the design data very quickly, and we could easily understand the optical structure of the designed Abbe-$K{\ddot{o}}nig$ prism by the three evaluation data. This means that we can quickly ensure the structural data of the Abbe-$K{\ddot{o}}nig$ prism which is required for the product development.

• Wind and Structures
• /
• v.17 no.3
• /
• pp.245-262
• /
• 2013

The flow interaction between two identical neighboring twin square prisms in a staggered arrangement in an open terrain was investigated experimentally. The downwind prism was mounted on a rigid-aeroelastic setup in an open-terrain boundary layer flow to measure its acrosswind root-mean-square responses and aerodynamic damping ratios. By varying the relative location of the upwind prism and the Scruton number associated with the downwind prism, the acrosswind aeroelastic behavior of the downwind prism was analyzed and compared to that of an isolated one. Results showed that the acrosswind root-mean-square response of the downwind prism could be either suppressed or enhanced by the wake flow produced by the neighboring upwind prism. Besides the assessment of the wake effect of the downwind prism, finally, regressed relationships were presented to describe the variation of the aerodynamic damping ratio so as to predict its acrosswind fluctuating response numerically.

• Atmosphere
• /
• v.24 no.1
• /
• pp.101-110
• /
• 2014

This study estimates and evaluates the daily January temperature from 2003 to 2012 with 30 m-resolution over South Korea, using a modified Parameter-elevation Regression on Independent Slopes Model (K-PRISM). Several factors in K-PRISM are also adjusted to 30 m grid spacing and daily time scales. The performance of K-PRISM is validated in terms of bias, root mean square error (RMSE), and correlation coefficient (Corr), and is then compared with that of inverse distance weighting (IDW) and hypsometric methods (HYPS). In estimating the temperature over Jeju island, K-PRISM has the lowest bias (-0.85) and RMSE (1.22), and the highest Corr (0.79) among the three methods. It captures the daily variation of observation, but tends to underestimate due to a high-discrepancy in mean altitudes between the observation stations and grid points of the 30 m topography. The temperature over South Korea derived from K-PRISM represents a detailed spatial pattern of the observed temperature, but generally tends to underestimate with a mean bias of -0.45. In bias terms, the estimation ability of K-PRISM differs between grid points, implying that care should be taken when dealing with poor skill area. The study results demonstrate that K-PRISM can reasonably estimate 30 m-resolution temperature over South Korea, and reflect topographically diverse signals with detailed structure features.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.708-715
• /
• 1998

The shelter effect of a porous wind fence on a triangular prism was experimentally investigated in a circulating water channel. A porous fence of porosity .epsilon.=38.5% was installed in front of the prism model. The fence and prism model were embedded in a turbulent boundary layer. The instantaneous velocity fields around the fence and prism model were measured by using the instantaneous velocity fields around the fence and prism model were measured by using the 2-frame PTV(Particle Tracking Velocimetry) system. By installing the fence in front of the prism, the recirculation flow region decreases compared with that of no fence case. The porous fence also decreases the mean velocity, turbulent intensity and turbulent kinetic energy around the prism. Especially, at the top of the prism, the turbulent kinetic energy is about half of that without the fence.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.205-209
• /
• 2016

The flowfield characteristics of a square prism having a small triangular prism at the upstream side were investigated by visualizing the flow field using PIV. The ratio of the width of the triangular prism to that of the square prism and the gap ratios between the square and triangular prisms were selected as the experimental parameters. The results are summarized as follows. The Strouhal number measured on the wake side of the square prism, which had the same characteristics as the drag reduction rate, increased, and then decreased with the gap ratio for the same width ratio. For a square prism having a small triangular prism, the stagnation regions were represented at the upstream and downstream sides of the square prism. The size of the stagnation region increased with the width ratio at the upstream side of the square prism, and decreased at the downstream side.

• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.91-95
• /
• 2017

Recently, infrared (IR) spectrometers have been required in various fields such as environment, safety, mobile, automotive, and military. This IR dispersive sensor detection method of substances is widely used. In this study, we fabricated a silicon (Si) prism-based near infrared (NIR) spectrometer utilizing micro electro mechanical system (MEMS) technology. Si prism-based NIR spectrometer utilizing MEMS technology consists of upper, middle, and lower substrates. The upper substrate passes through the incident IR ray selectively. The middle substrate, acting as a prism, disperses and separates the incident IR beam. The lower substrate has an amorphous Si (a-Si)-based bolometer array to detect the IR spectrum. The fabricated Si prism-based NIR spectrometer utilizing MEMS technology has the advantage of a simple structure, easy fabrication steps, and a wide NIR region operating range.