• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2044-2048
• /
• 2007

K-ModSim 모형을 이용하여 금강권역의 2006년의 기준수요량에 대한 수자원부존량을 평가하였다. 이에 대한 2006년 기준 생활, 공업, 농업, 하천유지용수 자료와 38년의 자연유출량 자료를 이용하고, 금강권역의 기존 및 계획 광역상수도를 고려한 물수지 네트워크를 작성하여 수행하였다. 수행결과 금강권역은 2006년 기준수요에 대해 74백만$m^3$/년의 물부족이 발생하였다. 금강권역에 대한 물수지분석 과정을 통해 K-ModSim 모형의 활용성을 확인할 수 있었다. 그동안 국내 사용자들에게 결과의 의문을 갖게 만들었던 병렬저수지 문제는 Reservoir Balancing을 이용해 동일 비율로 방류하도록 보완되었고, 입출력에 대해서 Excel 프로그램과 연동되게하여 복사 및 붙이기가 가능하도록 편리하게 개선되었다. K-ModSim 모형은 복잡한 유역의 효율적인 수자원 관리 및 운영을 위해 이해관계자에게 효율적인 정보를 제공할 수 있는 유용한 도구라고 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3319-3325
• /
• 2012

This paper describes the development of the TrackSim, which is a discrete event simulation tool for photolithography equipment of semiconductor industry. The TrackSim is focused on the accurate simulation model of the photolithography equipment and easy-to-use user interfaces. TrackSim provides 3D simulation environment for evaluating, validating, and scheduling the photolithography process. One of the major characteristics of TrackSim is in that it is developed based on Applied Materials' AutoMod, a discrete event simulation software broadly used in semiconductor industry. Accordingly, the photolithography model of TrackSim can be used to perform simulation connected with other simulation models built with AutoMod.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.57-62
• /
• 2007

Willemite green phosphor powders have been prepared by the metallo-organic decomposition (MOD) method, and the photoluminescence and phase formation were studied as a function of both the firing temperature ($800{\sim}1100^{\circ}C$) and the concentration of Mn activator ($4{\sim}12 mol%$). Under 254 nm excitation source, the emission intensity of the phosphors increased with increasing the firing temperature from 800 to $1000^{\circ}C$. From the XRD analysis, the powders heat-treated above $1000^{\circ}C$ showed willemite crystal structure. The maximum emission intensity was obtained far the phosphors heat-treated at $1000^{\circ}C$ with 8 mol% of Mn content. The concentration quenching was occurred when the Mn concentration exceeded 10 mol%. The phosphor particles showed spherical shapes with the average size of $0.4{\sim}0.5{\mu}m$ by the SEM morphology.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2059-2063
• /
• 2007

장기 수자원계획시 댐군의 연계운영을 위한 물수지분석 모형으로 HEC-5 모형과 K-ModSim 모형을 선정하고, 이에 대한 댐군의 연계운영 효과를 비교 평가를 수행하였다. K-ModSim 모형은 범용 우선순위 목적 선형최적화 모형으로, 조절점 및 저수지조작에 대한 우선순위를 지정할 수 있는 반면, HEC-5 모형은 목적별 저수지 조작의 우선순위가 지정되며, 등가저수지 개념을 사용하여 방류 우선순위를 결정하도록 되어있다. 이와 같은 연계운영 방식의 차이는 적정한 시기에 조절점에서의 물부족이 발생하는지 여부를 결정짓는 매우 중요한 요소이다. 따라서 본 연구에서는 가뭄발생 상황에 대한 각 모형의 연계운영효과를 비교 분석함으로써 급속히 변화하고 있는 수자원 이용환경에서 보다 합리적인 댐군의 연계운영 방안을 제시하고자 한다.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.22-26
• /
• 2006

Total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcination process, and XRD measurement shows that $BaF_2,\;CuO,\;and\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcination was measured to be ${\sim}2.8$ um by applying slot-die coating method. In particular, addition of Samarium shows critical current of Ic=226 A/cm-w($Jc=3.4\;MA/cm^2$). Also discussed are recent developments in the reel-to-reel processing using F-free Y & Cu precursor solutions. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solutions in MOD process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.107-108
• /
• 2006

High $J_c$ $YBa_2Cu_3O_x$, superconducting films were fabricated by MOD method using fluorine-free dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. DCA-MOD precursor solution was coated on a single crystal (001) $LaAlO_3$(LAO) substrate by a dip coating method with a speed of 25 mm/min. Coated films were calcined at lower temperature up to $500^{\circ}C$ and Conversion heat treatment was performed at various temperatures of $780{\sim}810^{\circ}C$. SEM observations showed that films have very dense microstructures for the films prepared at the temperature higher than $800^{\circ}C$ regardless of diluting solvent; methanol or 2-methoxyethanol. A High critical current density ($J_c$) of 1.28 $MA/cm^2$ (@77 K and self-field) was obtained for the YBCO film prepared using 2-methoxyethanol as a solvent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.33-34
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate (TFA) metalorganic depostition (MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce = 1:2+x:3:x (x = 0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature and conversion heat treatment at temperature of $780{\sim}810^{\circ}C$. It has been shown that the critical current (Ic) of YBCO film was degraded by doping of Ba and Ce atoms. But Ic was increased as the amount of doped Ba and Ce content increased from 5 % to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2001-2003
• /
• 2005

Various organic acid were used in order to prepare new metalorganic deposition solution for high quality $REBa_2Cu_3O_{7-{\delta}}$ (RE=Y, Eu, Gd) films. Prepared fluorine free MO precursor solution was coated on single crystal (001) $LaAlO_3$ (LAO) by dip coating method. Processing parameters such as oxygen partial pressure, water vapor, ramping rate and pyrolysis temperature etc havebeen controlled in order to make high $J_c$ films with a good epitaxial relationship with substrate. 0.5 micron-thick film was obtained by single coating and no crack appeared after calcination. Oxygen partial pressure was varied in the range of $100{\sim}1,000 ppm$ and conversion heat treatment was carried out at the temperature of $725{\sim}765^{\circ}C$. A critical transition temperature $(T_{c0})$ of 90K and a critical transport current density $(J_c)$ of $>0.5MA/cm^2$ (77K and self-field) were demonstrated for the YBCO film on (001) oriented LAO substrates with a thickness of 0.5 micron. $I_c$ was determined by utilizing a transport measurement. SEM and XRD investigations confirmed that films were grown epitaxially onto the LAO single crystal substrate. It is thought that fluorine free new MOD solutionis promising for high quality REBCO films.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.152-157
• /
• 2006

New precursor solution with dichloroacetic acid (DCA) was developed for fabricating high $J_c$ REBCO film. DCA based-precursor solution was coated on $LaAlO_3$(001) substrate by dip coating method. Processing parameters such as oxygen partial pressure, water vapor, ramping rate and pyrolysis temperature were controlled in order to obtain a good epitaxial film. The film with thickness of 0.5 micrometer was obtained by single coating and no crack was observed at calcined films. Oxygen partial pressure was controlled in the range of $100{\sim}1,000$ ppm and conversion heat treatment was carried out at the temperature range of $705-765^{\circ}C$. A critical transition temperature ($T_c$) of 90 K and a critical transport current density ($J_c$) of $>0.5\;MA/cm^2$ (77 K and self-field) were obtained for the GdBCO film. It is thought that fluorine-free MOD solution using DCA is promising precursor solution for fabricating high quality REBCO films.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.87-92
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate(TFA) metalorganic depostition(MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce=1:2+x:3:x(x=0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature under a moisture-containing oxygen atmosphere. Superconducting YBCO films have been obtained by performing conversion heat treatment at temperature of $780{\sim}810^{\circ}C$ under a moisture-containing Ar(1,000 ppm oxygen) atmosphere. It has been shown that the critical current($I_c$) of YBCO film was degraded by doping of Ba and Ce atoms. But $I_c$ was increased as the amount of doped Ba and Ce content increased from 5% to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.