• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.393-399
• /
• 2008

The reduction of the Vehicle interior noise has been the main interest of NVH engineers. The driver's perception on the vehicle noise is affected largely by psychoacoustic characteristic of the noise as well as the SPL. The previous methods to evaluation of the SQ about vehicle interior noise are linear regression analysis of subjective SQ metrics by statistics and the estimation of the subjective SQ values by neural network. But these are so depended on jury test very much that they result in many difficulties. So, to reduce jury test weight, we suggested a new method using Mahalanobis distance for SQ evaluation. And, optimal characteristic values influenced on the result of the SQ evaluation were derived by signal to noise ratio(SN ratio) of the Taguchi method. Finally, the new method to evaluate SQ is constructed using Mahalanobis-Taguchi system(MTS). Furthermore, the MTS method for SQ evaluation was compared by the result of SQ grade table at the previous study and their virtues and faults introduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.683-688
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions (MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• 한국중재학회지:중재연구
• /
• 제21권3호
• /
• pp.55-87
• /
• 2011

This paper is to illustrate a variety of court-annexed ADR programs and vindicate its implications of court-annexed ADR in United States. It has been almost three decades since Frank Sender articulated his vision of the multi-door courthouse. The court-annexed ADR originated from the concept of multi-door court house. Professor Sander argued that the court must transform from the court that provides litigation, only one type of dispute resolution, to the multi-door courthouse which provides a variety of dispute resolution methods including a number of ADR programs. The types of court-annexed ADR on which this paper focus are court-annexed mediation, court-annexed arbitration, mini trial, early neutral evaluation(ENE), summary jury trial, rent-a-judge, and med-arb in United States. The findings of this paper is as follows. First, the ADR movement is the irreversible and dominant phenomenon in the US court. The motivation of incorporating ADR into court is to reduce the cost of court to handle the civil disputes and to eliminate the delay of litigation process in the court. At the same time, a couple of studies of ADR revealed that the ADR program satisfied users of ADR. Second, the landscape of ADR has not been fixed. In 1970's, the court-annexed arbitration has been popular. In 1980's, the diverse kinds of ADR programs were introduced into the federal court as well as state courts, such as mini trial, early neutral evaluation(ENE), summary jury trial, and court-annexed mediation. But in 2000s, the court-annexed mediation has been the dominant type of ADR in United States. Third, the each type of ADR program has its own place for the dispute resolution. Since Korean society enters into the stage in which diverse kind of disputes occur in the areas of environment, construction, medicare, etc, it is desirable to take into consideration of the introduction of ADR to dispute resolution in Korea.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제21권3호
• /
• pp.497-510
• /
• 2015

국민참여재판에서 판사가 배심원에게 제시하는 법설시에는 범죄사실에 대해서 합리적인 의심이 없는 정도의 증명에 이르렀을 때 유죄를 인정해야 한다는 "합리적 의심의 초월 기준"에 대한 설명이 포함된다. 합리적 의심의 초월 기준은 일반적으로 배심원들이 평의를 시작하기 직전에 설명되는데, 본 연구에서는 설시절차(증거 이전, 증거 이후)에 따라 피고인에 대한 유죄/무죄 인정에 차이가 생긴다는 선행연구를 기반으로 그 인지과정을 알아보고자 하였다. 배심원 자격을 가진 만 20세 이상 성인남녀 189명을 대상으로 합리적 의심의 초월 기준에 대한 설명을 증거 전과 후에 받은 집단이 증거 후에만 설시를 받은 집단과 설시를 받지 않은 집단보다 피고인에 대한 유죄인정비율이 낮은지 분석한 후, 설시 제시절차와 유죄인정비율 사이의 두 가지 인지과정을 확인하였다: 1) 유죄판단 역치 생성, 2) 증거의 증명력 평가. 분석 결과, 설시를 증거 전후에 받은 집단은 다른 집단에 비해 피고인의 유죄를 판단하기 위한 역치가 높게 형성된 것을 확인하였으나, 증거의 증명력은 설시 제시절차 간에 유의한 차이가 없었다. 이러한 결과는 배심원이 재판에서 설시를 증거 전에 받았을 때, 각 증거의 증명력을 합리적 의심의 초월 기준으로 평가하기보다는 유죄결정을 위한 역치수준을 조정하여 그것을 기반으로 피고인에 대한 최종판단을 한다고 해석되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1191-1196
• /
• 2007

This research presents a laboratory study about an annoyance of impulsive sound caused by construction site(breaker and blasting). The sources are sampled from outdoor noise and their levels range from 40 to 75 dB at the interval of 5dB. The noise unit is based on A-weighted sound exposure level (ASEL; $L_{AE}$). To make equal ASEL of outdoor noise, finite impulse response (FIR) filter is applied to the originally sampled source to include the effect of distance attenuation. The evaluation method of jury test adopted a Semantic Difference Method (SDM). In the result of the Jury test for impulsive noise, the annoyance response of blasting noise was higher than that of breaker noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.714-720
• /
• 2008

This research presents a laboratory study about an subjective response of impulsive sound caused by leisure shooting. The sources are sampled from outdoor noise and their levels range from 40 to 75 dB at the interval of 5dB. The noise unit is based on A-weighted sound exposure level (ASEL; $L_{AE}$). To make equal ASEL of outdoor noise, finite impulse response (FIR) filter is applied to the originally sampled source to include the effect of distance attenuation. The evaluation method of the jury test adopted a Semantic Difference(SD) Method. In the result of the jury test for impulsive noise, the mean response rating expressed a linear relation and %HA(percent highly annoyed) displayed a exponential growth relation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.543-548
• /
• 2002

Nowadays since the customers of HDD's are interested in their noise levels in addition to their primary performances such as their average access time, capacity, HDD manufacturers make efforts on reducing the noise. The works to reduce noise are usually based on the measurable physical quantities such as SPL or acoustic intensity level. However, since the HDD noise is Judged by human beings, the basis of noise reduction should be human sensations. In this paper, the noise levels of various HDD's are evaluated by the human jury test to find a relationship between the physical quantities used for noise control and the human sensations of noise. Discrepancies are found in the judgments by the human beings and by the physical quantities. The loudness level, a psychoacoustic variable, is used to solve the discrepancy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.184-185
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.598-599
• /
• 2010

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.318-327
• /
• 2012

The operating sound radiated from a laser printer includes tonal noise components caused by the rotating mechanical parts such as gear, shaft, motor, fan, etc. The negative effects of the tonal noise components need to be considered in the process of developing a sound quality index for the quantitative evaluation of the emotional satisfaction in terms of psycho-acoustics. However, in a previous paper, it was confirmed that the Aures tonality did not have enough correlation with the results of jury evaluation. The sound quality index based on loudness, articulation index, fluctuation strength has a little problem in considering the effects of rotating mechanical parts on the sound quality. In this paper, to solve the tonality evaluation problem, the calculation algorithm of Aures tonality was investigated in detail to find the cause of decreasing the correlation. The new tonality evaluation model was proposed by modifying and optimizing the masking effect, loudness ratio, and shape of weighting curve based on the basic algorithm of Aures tonality, and applied to two kinds of operating sound groups in order to verify the usefulness of proposed model. As a result, it is confirmed that the proposed tonality evaluation model has enough correlation and usefulness for expressing the tonalness in the operating sounds of laser printers. In the following paper, this results will be used to model the sound quality index as the input data by using the classification algorithm.