• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.409-416
• /
• 2005

For broadband high-data-rate power line communication with the allocated frequency bandwidth from 2 to 30 MHz on medium voltage (MV) distribution power lines, a signal coupling unit is developed. The coupling unit is composed of a coupling capacitor for coupling communication signal, a drain coil, and an impedance matching part. The coupling capacitor made of ceramic capacitor is designed for transmission property of better than 1 dB in the frequency range. The drain coil is used for preventing low frequency high voltage from junction of medium voltage power line in case that a coupling capacitor is not working properly any more. Also, using ferrite core, a novel broadband impedance matching transformer is developed. A complete coupling unit with a coupling capacitor, a drain coil, and a matching transformer is housed by polymer for good isolation and distinguishing from high voltage electric facilities. Each is fabricated and its frequency behavior is tested. Finally, complete signal couplers are equipped in a MV PLC test bed and their performance are measured. The measurement shows that the coupling capacitor works excellently.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.623-632
• /
• 2013

전자기 토폴러지 기법은 복잡한 대상을 전자기 결합 경로에 따라 단순화시키고, 연속적인 해석 영역을 분할하여 각 절점에서의 해를 구하는 방법이다. 따라서 복잡한 대형 시스템에서의 전자기 결합 현상을 해석하는 데에 장점을 갖고 있지만, 해석 대상의 단순화된 모델링으로 인한 오차가 발생할 수 있다. 본 논문에서는 power balance method에 기초하여 전자기 토폴러지 기법에서의 오차를 추정하고 정션을 세분화함으로써 다양한 공진기 모델에서의 전도성 및 복사성 전자파 특성을 해석하였다. 해석 결과를 통해 세분화에 따른 정확도 개선 효과를 확인하였고, 시간 영역 유한 차분법 결과와 비교하여 소요 시간과 메모리 단축 효과를 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.391-395
• /
• 1997

The transmission of sound and vibration through structures is of interest in many noise control problems, including architectural acoustics, sound transmission through air craft, spacecraft and ship, and the transmission of noise through machinery and engine enclosures. Statistical Energy Analysis provides a simple and accurate method of approaching these problems. In this paper, comparing the measured coupling loss factor of plate-beam with measured coupling loss factor of mass on the junction will be inspected.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1842-1852
• /
• 2019

The AP1000 reactor coolant pump is a vertical shielded-mixed flow pump, is the most important coolant power supply and energy exchange equipment in nuclear reactor primary circuit system, whose steadystate and transient performance affect the safety of the whole nuclear island. Moreover, safety demonstration of reactor coolant pump is the most important step to judge whether it can be practiced, among which software simulation is the first step of theoretical verification. This paper mainly introduces the fluid-solid coupling simulation method applied to reactor coolant pump, studying the feasibility of simulation results based on workbench fluid-solid coupling technology. The study found that: for the unsteady calculations of the pure liquid media, the average head of the reactor coolant pump with bidirectional fluid-solid coupling decreases to a certain extent. And the coupling result is closer to the real experimental value. The large stress and deformation of rotor under different flow conditions are mainly distributed on impeller and idler, and the stress concentration mainly occurs at the junction of front cover plate and blade outlet. Among the factors that affect the dynamic stress change of rotor, the pressure load takes a dominant position.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.94-94
• /
• 2003

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.24-31
• /
• 2003

The discoveries of antiferromagnetic coupling in Fe/Cr multilayers by Grunberg, the Giant Magneto Resistance by Fert and Grunberg and a large tunneling magnetoresistance at room temperature by Moodera have triggered enormous research on magnetic thin films and magnetoelectronic devices. Large opportunities are especially opened by the spin dependent tunneling resistance, where a strong dependence of the tunneling current on an external magnetic field can be found. We will briefly address important basic properties of these junctions like thermal, magnetic and dielectric stability and discuss scaling issues down to junction sizes below 0.01 $\mu\textrm{m}$$^2$with respect to single domain behavior, switching properties and edge coupling effects. The second part will give an overview on applications beyond the use of the tunneling elements as storage cells in MRAMs. This concerns mainly field programmable logic circuits, where we demonstrate the clocked operation of a programmed AND gate. The second 'unconventional' feature is the use as sensing elements in DNA or protein biochips, where molecules marked magnetically with commercial beads can be detected via the dipole stray field in a highly sensitive and relatively simple way.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권2호
• /
• pp.6-9
• /
• 2021

단결정의 덩어리 시료로부터 박리된 NbSe₂와 FeSe 박막을 이용한 동종 초전도 vdW 접합을 만들고 저온전도측정을 통해 JJ 효과를 확인하였다. 각 물질의 초전도 틈을 측정하였으며 기존 결과와 잘 일치하는 것을 확인하였다. FeSe 접합의 경우 NbSe₂ 접합과 다르게 JJ가 구현되지 않는 경우가 다수 발생하는데 이는 NbSe₂와 구분되는 FeSe의 특성때문으로 보이며 일관성있는 JJ 구현을 위해서 저온 접합이나 접합 각도 의존성을 통한 향후 연구가 필요하다. 그럼에도 불구하고, 본 연구 결과는 FeSe 2차원 결정을 이용해 JJ가 잘 구현될 수 있음을 실험적으로 보인 첫 사례로서 그 의의를 갖는다.

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.16-22
• /
• 1976

비가역성 소자인 광대역 마이크로스트립 Y형 써어클레이티는 Bosma의 Green함수를 적용하여 Rosenbaum이 해석하띠 산란행렬로 실제적 이론치인 삽입손실, 아이솔궤이션을 구하였다. 중요한 설계 변수로는 전봉선과 접합각인 ${\psi}$이고 이를 알맞게 선택하여 광대역 정합을 이루었다. 또한 Y형 써어쿨레이터의 입력칟지던스를 구하였다. 제작시 실표반학은 이론치보다 7.5% 적은것을 요하며 5-11GHz에서 V.S.W.R.은 1.5이하였고 최대 삽입손집은 0.5dB, 아이슬레이션은 15dB 이상이었다.

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.66-70
• /
• 2005

The junction properties between the ferromagnet (FM) and two-dimensional electron gas (2DEG) system are crucial to develop spin electronic devices. Two types of 2DEG layer, InAs and GaAs channel heterostructures, are fabricated to compare the junction properties of the two systems. InAs-based 2DEG layer with low trans-mission barrier contacts FM and shows ohmic behavior. GaAs-based 2DEG layer with $Al_2O_3$ tunneling layer is also prepared. During heat treatment at the furnace, arsenic gas was evaporated and top AlAs layer was converted to aluminum oxide layer. This new method of forming spin injection barrier on 2DEG system is very efficient to obtain tunneling behavior. In the potentiometric measurement, spin-orbit coupling of 2DEG layer is observed in the interface between FM and InAs channel 2DEG layers, which proves the efficient junction property of spin injection barrier.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.