• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.474-477
• /
• 2009

In this paper, flow stress of Al6061 is obtained by compression test in the range of temperature from $300^{\circ}C$ to $550^{\circ}C$ and effective strain-rate from 0.1/s to 20.0/s. The flow stress information is used to simulate an aluminum hot forging process. Non-isothermal simulation is carried out by a rigid-thermoviscoplastic finite element method. The predictions are compared with the experiments in terms of the deformed shape of material.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.329-332
• /
• 2002

In this paper a common design method fur RF receivers of different CDMA standards is introduced. The method adopted a new equation, receiver noise equation, for the analysis of each standard. The test conditions for RF receivers in four different CDMA standards, CDMA cellular, PCS, WCDMA, and cdma2000 are analyzed based on the receiver noise equation. With the result of the analysis, the specifications fer RF receivers of different CDMA standards are derived.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.174-181
• /
• 2004

In this paper, we review the four receiver architectures and four methods for multi-standard receiver design. Propose reconfigurable RF block can be used for both low-IF and direct conversion architecture. Also, using reconfigurable mixer method, it can be operated at $2{\sim}6$ GHz range for multi-standard receiver. It consists of wideband mixer, filter, and automatic gain control amplifier and to get wide-band operation, $2{\sim}6$ GHz, wide-band mixer use flexible input matching method. Besides, to design multi-standard receiver, LNA bank that support each standard is necessary and it has good performance to compensate the performance of wide-band mixer. Finally, we design and simulate proposed reconfigurable RF block and to prove that it has acceptable performances for various wireless standards, the LNA bank that supports both IEEE 802.11a/b/g and WCDMA is also designed and simulated with it.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.199-210
• /
• 1997

The purpose of this study was to examine whether social support buffers the deleterious effects of strain on life satisfaction of the aged and to provide information for finding out ways of increasing their life satisfaction. The subjects of this study were 252 aged persons living in Kwangju and Joun-nam. The statistics used for data analysis were frequency percentage mean standard deviation reliablity Pearson's correlation multiple regression analysis through the SAS package program. 1) The support score from family was higher than the support from friends and the total point of life satisfaction of the aged was 28.4 which was above the median 24. 2) Social support especially the support from family buffer the negative effect of strain on life satisfaction of the aged. The result indicates that the family remains a supportive system for the aged parents Therefore A program in necessary for aged parents to promote the emotional solidarity between the aged parents and their children.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1433-1438
• /
• 2006

A systematic approach to socket shape design of a concave piston assembly for a high pressure hydraulic pump of an excavator is presented in this paper. A design model is given and a methodology of socket shape design is proposed. An axisymmetric rigid-plastic finite element method is employed for predicting the approximate socket shape formed by a rotary forming process as well as for simulating the test process for separating the shoe from the piston assembly designed. It is verified that the predictions are in good agreement with the experiments. The approach is successfully applied to developing an optimal concave piston assembly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1159-1162
• /
• 2004

A modeling of the nucleation and dynamical behavior of defects from an inhomogeneous surface configuration using fast Q-tensor method is realized. On modeling the defect nucleation and dynamics, A fast Q-tensor method is applied. From the numerical modeling, we confirmed that surface inhomogeneity which makes strong strain energy in the local liquid crystal director field could cause defects. Experimental result has compared with numerical modeling in order to verify the simulation of the defect nucleation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1492-1499
• /
• 2004

In this paper, defect formation in ring rolling is revealed by computer simulation of ring rolling processes. The rigid-plastic finite element method is employed for this study. An analysis model having relatively fine mesh system near the roll gap is used for reducing the computational time and a scheme of minimizing the volume change is applied. The formation of the central cavity formation defect in ring rolling of a taper roller bearing outer race and the polygonal shape defect in ring rolling of a ball bearing outer race has been simulated. It has been seen that the results are qualitatively good with actual phenomena.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1475-1482
• /
• 2004

In this paper, the rigid-viscoplastic finite element solutions obtained by MINI-elements based triangular elements and tetrahedral elements are compared with those obtained from numerically well-behaved rectangular and hexahedral elements. The theoretical background of the MINI-elements is introduced in detail and the rigid-viscoplastic finite element formulation is also given. Discussion on the results of the MINI-elements is made with emphasis on the effect of a stabilizer simplifying velocity-bubble coupled terms.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.49-55
• /
• 2006

The effect of coating temperature with regard to surface properties of TiN-coated layer on hard metal(WC-Co) are experimentally investigated. Hardness, surface roughness, TiN coating thickness and adsorption force were measured in order to evaluate the effect of coating temperature. The two-way ANOVA method is used in order to evaluate the experimental data. In AIP processing, It is concluded that the furnace temperature in the range of $400^{\circ}C\~500^{\circ}C$ affected to a little increasing the number of production with the coating temperature.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.180-185
• /
• 2000

In this paper, a local remeshing technique assisted by flexible user-interface capabilities is presented for precise forging simulation. The rigid-plastic finite element formulation is introduced and the detailed approach to the new local remeshing technique is given. A piercing process in cold forging is simulated by the presented technique and the simulated results are compared with those obtained by the technique and the simulated results are compared with those obtained by the conventional approach and experiments. A typical application example is also given, which emphasizes the capability of the local remeshing technique in forging simulation.